NEW - Finless ROM 2.0 - KitKat 4.4.2 for AP6210 wifi - BETA

[alex5908]

Will it work with XT-Q7-V10 TV box?

Will it work with XT-Q7-V10 TV box?

[codger64]

How to sign into KK after reboot?

OK - I flashed this ROM on my CX-919ll rk3188T and when setting things up with Android it rebooted so my question is: How do I sign in when the mouse or keyboard will not move the arrow to the right to sign into Android KK? This is designed for a touch screen of course so how do I get this done when using with a TV?
Do I have to re-flash it and start over and hope to get through enough of the setup to change settings to use a PIN to sign in?

[jpservices01]

OK - I flashed this ROM on my CX-919ll rk3188T and when setting things up with Android it rebooted so my question is: How do I sign in when the mouse or keyboard will not move the arrow to the right to sign into Android KK? This is designed for a touch screen of course so how do I get this done when using with a TV?
Do I have to re-flash it and start over and hope to get through enough of the setup to change settings to use a PIN to sign in?

Don't you have a USB mouse?

[codger64]

Don't you have a USB mouse?

Yes I have an airmouse but the mouse cursor doesn't show up on screen until you get past the sign in screen (the screen with the arrow within a circle). So how do I move the arrow within a circle icon to the right to sign in?

[jpservices01]

Yes I have an airmouse but the mouse cursor doesn't show up on screen until you get past the sign in screen (the screen with the arrow within a circle). So how do I move the arrow within a circle icon to the right to sign in?

Airmouse? Are you suggesting this is a bluetooth or some kind of wireless? Try a wired USB mouse, move passed the security screen, connect your air mouse and then next time you reboot you should be good to go...

Hope this helps.

[codger64]

Airmouse? Are you suggesting this is a bluetooth or some kind of wireless? Try a wired USB mouse, move passed the security screen, connect your air mouse and then next time you reboot you should be good to go...

Hope this helps.

Thanks for your reply. Yes an airmouse is a wireless USB mouse with a gyroscope in it so it does not need to be on a surfasce to work. I will try the wired mouse and see if that works - thanks.

[taptank]

Updated Beta Version released

Hi There Finless,

I have been enjoying your roms for this device for a while now, including this one.
I recently read on Geekbuying's blog that Tronsmart have released an updated Beta about 3 weeks ago,
and I'm wondering if you plan on releasing an updated Beta of your own based own this new release please?
Would be wonderfull if at all possible.

Keep up the good work fella!
I have now introduced a few mates to your custom roms and they are loving it over their stock versions

[mo123]

Why don't people use stable stock KitKat AP6210 ROM's?
This is still a beta ROM.

http://pan.baidu.com/s/1pJwPYIn

[jpservices01]

Why don't people use stable stock KitKat AP6210 ROM's?
This is still a beta ROM.
http://pan.baidu.com/s/1pJwPYIn

Thanks for the alternative. By the way in this case BETA does not mean unstable. Finless ROMS works really nicely and swiftly. I have not found any missing feature yet.

[jpservices01]

Hi There Finless,

I have been enjoying your roms for this device for a while now, including this one.
I recently read on Geekbuying's blog that Tronsmart have released an updated Beta about 3 weeks ago,
and I'm wondering if you plan on releasing an updated Beta of your own based own this new release please?
Would be wonderfull if at all possible.

Keep up the good work fella!
I have now introduced a few mates to your custom roms and they are loving it over their stock versions

Hi Finless or anybody:

If you build a new version of this ROM would it be possible to integrate the multitouch.ko that was made available a while back for version 1.4 of the ROM for the CX919?

This would be really great!

Thanks

[FinoManolo]

Works with MK908II

Hi here,

First, thanks to Finless for the rom. It works great on my Tronsmart mk908II.
I share the feeling that XBMC run better on this rom than the 4.2.

Some issue I expected :

- Volume control has only 2 positions : on (100%) and off (0%). Same problems using Yatse.
- RKremote control for 3188 doesn't works with this new rom.

I propose help to realize some tests if needed.

One more time, great job Finless !
Have a great day !

[vxxozxxv]

Hi here,

First, thanks to Finless for the rom. It works great on my Tronsmart mk908II.
I share the feeling that XBMC run better on this rom than the 4.2.

Some issue I expected :

- Volume control has only 2 positions : on (100%) and off (0%). Same problems using Yatse.
- RKremote control for 3188 doesn't works with this new rom.

I propose help to realize some tests if needed.

One more time, great job Finless !
Have a great day !

I agree, this is a great ROM. I think though support from Finless on this is long over. There has been no updates for a very long time, and I don't expect to see a fix to the above issues. We can only hope there is a full release ROM from Finless for this model that is no longer Beta.

I will say, I tried switching to another ROM to get volume control. It was fixed, but that ROM wasn't nearly as stable as this one. I will switch back as it's not worth it.

[codger64]

Can't get Netflix to play on this ROM??

Hello - I can get my Tronsmart CX-919 (Ver. 2.0 on the board) Rockchip RK3188T chip to load this ROM but when I try to play anything on Netflix it locks up and I have to reboot. Any suggestions would be appreciated. It also sometimes locks up when I use the USB Airmouse / keyboard from GeekBuying.com. I have changed the power supply to a 5V 2.5 Amp regulated one and drilled holes on the case to help with the heat FYI.

[vxxozxxv]

Hello - I can get my Tronsmart CX-919 (Ver. 2.0 on the board) Rockchip RK3188T chip to load this ROM but when I try to play anything on Netflix it locks up and I have to reboot. Any suggestions would be appreciated. It also sometimes locks up when I use the USB Airmouse / keyboard from GeekBuying.com. I have changed the power supply to a 5V 2.5 Amp regulated one and drilled holes on the case to help with the heat FYI.

Hello. Im running almost the same device the MK908ii with this ROM. You do need to make sure to load it with the kernel from D33. Here is the link -http://www.freaktab.com/showthread.php?11193-Kitkat-Kernels-for-All-(well-most!)

Be sure to run version 3.1 as this ROM is still BETA with no updates from the looks of the activity by the developer of it. Your device is using AP6210 for wifi so choose this.

This is the most stable ROM and Kernel combo I have tried. Only issue I have is there are no volume controls, but thats okay for me since I run it through a reciever anyways. I run Netflix, Beyond XBMC, Hulu, Pandora, MX player and much more with no difficulties. I also choose to use the SD over HD for the improved performance and I could see the icons better. AnTuTu score of 25450, wich is way better than stock at 17249.

Good luck.

[codger64]

Hi - thanks for your reply. I'm not quite sure what you mean by no volume controls? I will be using this with the Sony LCD TV in the bedroom so it won't have a surround amp hooked up to it. Will I not be able to use the volume control on the TV?? Also should I use the AP6210-alt or the regular AP6210? Which kernel should I use - I just want a stable video playback with no flickering, reboots, or lockups and I have no need to overclock it - so which kernel will make that happen please?

Hello. Im running almost the same device the MK908ii with this ROM. You do need to make sure to load it with the kernel from D33. Here is the link -http://www.freaktab.com/showthread.php?11193-Kitkat-Kernels-for-All-(well-most!)

Be sure to run version 3.1 as this ROM is still BETA with no updates from the looks of the activity by the developer of it. Your device is using AP6210 for wifi so choose this.

This is the most stable ROM and Kernel combo I have tried. Only issue I have is there are no volume controls, but thats okay for me since I run it through a reciever anyways. I run Netflix, Beyond XBMC, Hulu, Pandora, MX player and much more with no difficulties. I also choose to use the SD over HD for the improved performance and I could see the icons better. AnTuTu score of 25450, wich is way better than stock at 17249.

Good luck.

Hi - thanks for your reply. I'm not quite sure what you mean by no volume controls? I will be using this with the Sony LCD TV in the bedroom so it won't have a surround amp hooked up to it. Will I not be able to use the volume control on the TV?? Also should I use the AP6210-alt or the regular AP6210? Which kernel should I use - I just want a stable video playback with no flickering, reboots, or lockups and I have no need to overclock it - so which kernel will make that happen please?