Neomode Custom Rom MK802IV / MK809III 2.1 BETA RK3188-T and RK3188

[TVDroid]

LOL, I think ur the droid I'm looking for...
Thanks for the info. Just flashed Neo's 1.7 and 1080p 1.8ghz ram 1400mhz kernel. So far, so good. Bluetooth is fine. WiFi is good. Netflix is good in 720p. 1080p exhibits the same problem as always, haven't noticed any flickering:

You got this green Dots Image Error with stock ROM too ? Looks like your GPU is not the Best...

[imaddiced2u]

You got this green Dots Image Error with stock ROM too ? Looks like your GPU is not the Best...

I think it did but I can't say for sure if it appeared in the stock ROM or not. I just don't remember. Next time I'm switching ROM's, I'll load the stock firmware and check.

[TVDroid]

It looks like as your GPU is damaged.
I see the same many Times, on damaged PC graphics Cards.
If you can return the Stick to the Seller, still better first not tinker with ventilators or something similar. Otherwise i would almost say you have a nice paperweight
But i dont want to make you fear and with this assessment i dont want to lean too far out of the window, but it looks realy like a damaged GPU.

I wish you luck Dude

[potard]

Here's my board. MK 809 III bought from geekbuying, december 2013.

Overclocking works but I have the blinking issue with Neo 2.1 and SAM kernels (I have tested many).
Neo2.0 works fine but CPU clock goes from 1,2 to 1,4Ghz only and no bluetooth.
Hope it will help

[TVDroid]

See my Signature, i have the same Board.
For me works Neo 1.7 and SAM Kernel, you try this ?

[imaddiced2u]

It looks like as your GPU is damaged.
I see the same many Times, on damaged PC graphics Cards.
If you can return the Stick to the Seller, still better first not tinker with ventilators or something similar. Otherwise i would almost say you have a nice paperweight
But i dont want to make you fear and with this assessment i dont want to lean too far out of the window, but it looks realy like a damaged GPU.

I wish you luck Dude

You are correct TVDroid. I just confirmed it. I wish I had checked before. I have two MK809III's. The other tv only goes to 720p, so I never checked it. I brought that one in to my tv and 1080p works fine. I already added an external antenna and the seller refunded me $61.62 for the wifi and 3188-t issues so I won't be out too much.
Is there a software to take an image of each device so I can switch them around without having to reinstall apps and settings, etc?

[potard]

See my Signature, i have the same Board.
For me works Neo 1.7 and SAM Kernel, you try this ?

Yes but don't stop blinking. Screen goes on and off every 2 secondes with Neo 1.7 and Sam kernel for me

[imaddiced2u]

Y
Is there a software to take an image of each device so I can switch them around without having to reinstall apps and settings, etc?

I believe I found the answer to my question in this thread...

http://www.freaktab.com/showthread.php?10129-Backing-up-your-RK-device-%28ROM%29-with-the-new-RK-2-1-tool&highlight=backup

[okey]

Well Sir, i would say your Wifi Module is either broken or it use a different
GPIO Point.

I think it is a different GPIO Point.

Neomode

I can get it working using the BT919 firmware, picture is fine and wifi works, just want to use your 2.0 firmware pal

how can i sort the GPIO point out, as that is what it sound like.

thanks for the help

[Gianca90]

Yes but don't stop blinking. Screen goes on and off every 2 secondes with Neo 1.7 and Sam kernel for me

Hi, you can partially resolve the blinking/flickering problem by connecting the tv stick directly to the hdmi tv port. (without using the cable)

For me the the screen now doesen't go on and off every 2 sec; but for every overclocked kernel I have an image distorting problem (lesser in 1080p and overclocking the gpu)...

[okey]

Well Sir, i would say your Wifi Module is either broken or it use a different
GPIO Point.

I think it is a different GPIO Point.

Neomode

Got to try get this work mate, i have just installed v.2.0 on it again, and the picture is stable no lines or flashing, but cannot switch wifi on.

I also extracted the kernel from the BT919 firmware image, and replaced that in yours, and still no wifi, but the BT919 firmware does work with wifi, but i would like to have the 2.0

Sorry if this is in the wrong section

Just hope you can help

Is there anything i could try on this

please help

[dan.kels.r]

MK902 should work right?

Hey guys I just got my new box in and it sucks! It's the mk902 with rk3188 chipset. The riko site says it's based on the same technology as the mk802iv. Should the 802 roms work on my 902? I how so because this thing reboots if I look at it wrong. While it is on its super snappy and looks good.

[neomode]

AW: Neomode Custom Rom MK802IV / MK809III 2.1 BETA RK3188-T and RK3188

It should Work. Because I tested my rom on a MK802IV with RK3188T.
Please try it ;-)

Neomode

Gesendet von meinem GT-I9305 mit Tapatalk 2

[Amarok74]

MK802IV new....

...and it reboot randomly.... all other things are ok....

[dan.kels.r]

OK what method is used to flash the rom? Hoping you say
Custom recovery flashing the file. On the 902 you have to go USB male to USB male cable to run the rk flash program

It should Work. Because I tested my rom on a MK802IV with RK3188T.
Please try it ;-)

Neomode

Gesendet von meinem GT-I9305 mit Tapatalk 2