Has anyone tried this yet with their own ethernet adapters ?
Announcement
Collapse
No announcement yet.
Announcement
Collapse
No announcement yet.
Kitkat Kernels for All (well most!)
Collapse
This is a sticky topic.
X
X
-
Originally posted by jacobsson View PostThanks for clarifying!
By the way, do you now how I could test my RAM/CPU/GPU more in depth?
D33 claims that having OC above 1800/600/720 would cripple my hardware in real life performance, I haven't noticed this at all. To be sure I'd like to do a more thorough analysis.
Thanks!
Think D33 stated (not claimed ) oc always has a chance that it will fry your board or not run properly over 1.8 so if you did you got lucky and a good chip (how long it lasts at that speed??? thats another iffy lol )Many devices now mk902ii/Shield/Mk68 /Ugoos/neox5/minix5 (yes they still work lol) mk80 no it doesnt work lol.
Comment
-
Originally posted by ididmytime View PostIt depends on the distro of XBMC, 85fps is pretty good, the highest I have seen with mine is around 75ish, so you are scoring around 12% higher. The fan point I made is simply because I don't think it's worth 12%, but we are all different. Would be interesting to try the Ice Storm Extreme Benchmark, my old mk808 (same GPU) scored 7.3fps and 9.1fps. The rk3188 is now clocked higher but I don't think anybody will hit 15fps for either test.
In terms of emulation, it shouldn't have too much of an issue apart from Dreamcast/Dos/PSP as I was running everything on an old Galaxy S2 and that was underclocked to around 1ghz.
Here is my Ice storm extreme result, seems pretty good although it's no 15fps?
PIPO-P1@1.6GHz
ROM: RileyROM 1.7CX-919@1.9GHz/798MHz/800MHz
ROM: Finless 4.4.2 BETA
Kernel: D33's AP6210 HD v3.00 +noderat OC
Fan mod: Outside & inside + Antutu: 23694 & Stability test
Comment
-
Originally posted by jacobsson View PostHi buddy!
Here is my Ice storm extreme result, seems pretty good although it's no 15fps?
http://i.imgur.com/ttJlrej.pngCurrently Using:
2 x Nvidia Shield TV | MiniMX III
Retired Devices:
MiniMX III-II | Mk808b Pro | Mk808b Plus | Raspberry Pi 1 + 2 | UBOX R89 | MK808 | MK808b | CS008 | X1 4K (rk3288_809) | CYX_809III | Ouya | CX-919 | S82 Plus | Tronstmart R68
Comment
-
Re: Kitkat Kernels for All (well most!)
Originally posted by d33 View PostA few things:
2. Bob and I are working on the new 'Official' KitKat release, I've already got a new kernel prepared from scratch with full unlock. Much cleaner than the beta ones. Be patient.
Verstuurd vanaf mijn GT-I9300 met Tapatalk
Comment
-
Originally posted by ididmytime View PostIt's exactly where I thought it would be in terms of performance, i'd say you're getting perhaps 1fps more then a stock rk3188.
We review the RK3188 Android Mini PC, a quad-core computer on a stick that lets you play HD movies or demanding Android games on any HDMI-capable TV.
These are of course with the stock rom.
I'd be interesting if someone else with: 1800/600/720 did an Ice storm extreme for comparison!PIPO-P1@1.6GHz
ROM: RileyROM 1.7CX-919@1.9GHz/798MHz/800MHz
ROM: Finless 4.4.2 BETA
Kernel: D33's AP6210 HD v3.00 +noderat OC
Fan mod: Outside & inside + Antutu: 23694 & Stability test
Comment
-
Originally posted by d33 View Post:grin: quite sure. I coded it!
Sent from my iPhone using Tapatalk
Could you make an Ice storm extreme bench with 1800/600/720 for comparison?
I'd be very grateful!PIPO-P1@1.6GHz
ROM: RileyROM 1.7CX-919@1.9GHz/798MHz/800MHz
ROM: Finless 4.4.2 BETA
Kernel: D33's AP6210 HD v3.00 +noderat OC
Fan mod: Outside & inside + Antutu: 23694 & Stability test
Comment
-
Kitkat Kernels for All (well most!)
Originally posted by jacobsson View PostHi D33.
Could you make an Ice storm extreme bench with 1800/600/720 for comparison?
I'd be very grateful!
Sent from my iPhone using TapatalkMeasy U4B (=Tronsmart T428) used by my kids!
Onda v975m - M802 - Bought from Banggood.com
Pipo M8HD 3G - RK3188 - don't buy from pipo-store
Tronsmart S89 Vega -S802 (sponsored by Geekbuying)
CX921b -RK3188T (sponsored by AndroidTV)
Cube U30GT2 - RK3188 (part sponsored by Geekbuying)
RKM MK902 - RK3188 (sponsored by RKM)
Donate to Finless
Comment
-
Originally posted by d33 View PostWhy not just flash the kernel and run the benchmark yourself?
Sent from my iPhone using Tapatalk
Never mind, thanks anyway!PIPO-P1@1.6GHz
ROM: RileyROM 1.7CX-919@1.9GHz/798MHz/800MHz
ROM: Finless 4.4.2 BETA
Kernel: D33's AP6210 HD v3.00 +noderat OC
Fan mod: Outside & inside + Antutu: 23694 & Stability test
Comment
-
kernel working great for me now dont know why it was rebooting before but gone back to 1704/600/800 . mk908ii-T Finless 2.0 a928 rom D33 v3.0, only problem is it sometimes wont boot/reboot and have to repeatedly cycle power until it does, not sure if its failed to boot or if its failed to produce hdmi signal, but can live with that for now, leave it on most of the time anyway, no problems with signal loss once on - been on for 4 days now.
Comment
-
Kitkat Kernels for All (well most!)
Originally posted by jacobsson View PostI'm not at home for a while and thought you might have those clocks set.
Never mind, thanks anyway!
Sent from my iPhone using TapatalkMeasy U4B (=Tronsmart T428) used by my kids!
Onda v975m - M802 - Bought from Banggood.com
Pipo M8HD 3G - RK3188 - don't buy from pipo-store
Tronsmart S89 Vega -S802 (sponsored by Geekbuying)
CX921b -RK3188T (sponsored by AndroidTV)
Cube U30GT2 - RK3188 (part sponsored by Geekbuying)
RKM MK902 - RK3188 (sponsored by RKM)
Donate to Finless
Comment
-
Originally posted by d33 View PostHaha. I'm working on client site 8:30 - 19:00 mon to thurs
Sent from my iPhone using TapatalkPIPO-P1@1.6GHz
ROM: RileyROM 1.7CX-919@1.9GHz/798MHz/800MHz
ROM: Finless 4.4.2 BETA
Kernel: D33's AP6210 HD v3.00 +noderat OC
Fan mod: Outside & inside + Antutu: 23694 & Stability test
Comment
-
Originally posted by jacobsson View PostWow those work hours sucks
I should add I'm well paid (don't tell my boss!) so you don't need to feel sorry for me! I do this as a hobby whilst it is interesting.Measy U4B (=Tronsmart T428) used by my kids!
Onda v975m - M802 - Bought from Banggood.com
Pipo M8HD 3G - RK3188 - don't buy from pipo-store
Tronsmart S89 Vega -S802 (sponsored by Geekbuying)
CX921b -RK3188T (sponsored by AndroidTV)
Cube U30GT2 - RK3188 (part sponsored by Geekbuying)
RKM MK902 - RK3188 (sponsored by RKM)
Donate to Finless
Comment
-
Originally posted by d33 View PostI go home Thurs night and work from home Friday, so that is a slower day.
I should add I'm well paid (don't tell my boss!) so you don't need to feel sorry for me! I do this as a hobby whilst it is interesting.
But I admire the hours you seem to be able to squeeze in to this/these project(s) as well!
I saw that there is some RK3288 units coming soon, are you planning make them 'from-unusable-to-more-than-usable' as well?PIPO-P1@1.6GHz
ROM: RileyROM 1.7CX-919@1.9GHz/798MHz/800MHz
ROM: Finless 4.4.2 BETA
Kernel: D33's AP6210 HD v3.00 +noderat OC
Fan mod: Outside & inside + Antutu: 23694 & Stability test
Comment
What's Going On
Collapse
There are currently 6580 users online. 1 members and 6579 guests.
Most users ever online was 63,956 at 18:56 on 20 March 2025.
Comment