Kitkat Kernels for All (well most!)

[Max One]

...
AP210/AP6210-alt/AP6330 --> TV Stick

D33 mate, could u make sd kernels of this pack above, please?

Thx in advance

+1

Nope, everything works nice except the boot issue.
Edit: I am using this rom http://www.freaktab.com/showthread.p...-for-Ugoos-UM2 atm with d33´s v4 Kernel. Works great so far.

@ d33

Is it possible to make a t kernel without oc possibility gpu and ddr to avoid the boot issue?
The default clock of the kernel should be 1.6 ghz / 720 DDR / 600 GPU.

+1


Sry was to lazy to write those questions again =)

[d33]

Sry was to lazy to write those questions again =)

... and quite clearly too lazy to read the last few posts

[Ploggy]

D33 are any of your recent kernels compatible with this KK rom

http://blog.geekbuying.com/index.php/2014/01/13/rom-download-android-4-4-kitkat-beta-firmware-for-tronsmart-mk908-v3-and-v5-version/#.U1wkU1VdVA0

Thanks

[Max One]

... and quite clearly too lazy to read the last few posts

Thats not true. I read them all.

Originally Posted by d33
I'm going to be much less active now unfortunately.

I've re-compiled the 'tester' kernels with GPU and GPU&DDR 'locked' - link in the OP. I can't test so let me know.

I've just seen there is source available for a linux 3.10 kernel, may have a look.

I have tested it and those kernels are not for my stick, wifi and bt are not working. Ok the boot issue is gone and thats it.


I just wanted to know if its possible to make a kernel (SD and, or HD) for a t version with default clocks 1.6 cpu / 720 ddr / 600 gpu??

ddr and gpu locked at 720 and 600.


SD TVBOX tester (AP6210, 1280x720) sd with density of 240dpi looks ******* huge . Wifi and BT not working for me.
This 1 has no ugos bootlogo and boot issue is gone.

[Max One]

D33 are any of your recent kernels compatible with this KK rom

http://blog.geekbuying.com/index.php/2014/01/13/rom-download-android-4-4-kitkat-beta-firmware-for-tronsmart-mk908-v3-and-v5-version/#.U1wkU1VdVA0

Thanks

Here u will find the answer. http://www.freaktab.com/showthread.p...l=1#post170720

[Ploggy]

Here u will find the answer. http://www.freaktab.com/showthread.p...l=1#post170720

Thanks mate. I only ask because the one I posted a link to and the one these kernels are made from are different I think?

[d33]

Thats not true. I read them all.

We are clearly not on the same page at all.

ALL the 4.0 release kernels produced are clocked at 1.6/720/600, are HD res (1920x1080) and are for all SOC variants (T and original).

I produced a couple of 'tester' kernels for people who said these didn't boot so that they could test if re-locking GPU to GPLL frequency and/or limiting DDR to 450 MHZ worked for them (proving their SOC's couldn't work 'unlocked')

Today I responded to a request for SD (1280x720) kernel versions by producing a single test SD kernel for someone to confirm before I built the full series.

[alan.w]

SD TVBOX tester (AP6210, 1280x720)

Everything works well

No resets
Wifi OK
BT OK
Antutu 17500 - 18000

[d33]

Everything works well

No resets
Wifi OK
BT OK
Antutu 17500 - 18000

Thanks for testing

Full series of SD created - see the OP

[d33]

Final one for tonight

temporary test for CS968 models with AP6210 or MK5931/6622 wifi -> v4053

[ynot123]

I'm going to be much less active now unfortunately.

I've re-compiled the 'tester' kernels with GPU and GPU&DDR 'locked' - link in the OP. I can't test so let me know.

I've just seen there is source available for a linux 3.10 kernel, may have a look.

I can report that kernel_kk_4.0_NOGPU_DRR is working well with my mk802IV non-t. Running at 1.6GHz, XBMC gotham beta 4, antutu 17500. Sound is good. Thanks for the hard work here.

For me, no logo and no boot with kernel_kk_4.0_noGPU

[wichoxp]

Full series of SD created - see the OP

Working fine on my MK809iii (clone) with Neomode's CR 3.1 KitKat rom.
My User Interface (menu, transitions, etc) looks smooth & faster.
Benchmark 17700 !

Is it possible to make Overclocked versions of them?
Greetings.

[babnik80]

Hi All,

I did a complete test to my stick and i found these...
Everything was tested with Geekbuying latest Android KK firmware:At stock works fine.
With 2.7 kernels everything is fine.
With 3.xx i can`t even boot.
With 4 kernels i can`t boot.
With 4 kernel no GPU, stick boots, i can see ugoos logo for a split second, an then i get parallel white lines distorted.
With 4 kernel no GPU and no DDR, i get the ugoos logo and stuck at this.
I have the MK802IV from rikomagic.
Any advise would be grateful. Everything i try with kernel that have the gpu or ddr unlocked isn`t working for me. The cpu works well with o/c till 1.9mhz, but i can`t use any unlocked kernel, not even the no gpu no ddr one.

[JDfense]

AW: Kitkat Kernels for All (well most!)

Final one for tonight

temporary test for CS968 models with AP6210 or MK5931/6622 wifi -> v4053

Right now I'm back in germany, but still on the road.
In the evening...;-)

JDfense --->I8160

[Magnus33]

Hi All,

I did a complete test to my stick and i found these...
Everything was tested with Geekbuying latest Android KK firmware:At stock works fine.
With 2.7 kernels everything is fine.
With 3.xx i can`t even boot.
With 4 kernels i can`t boot.
With 4 kernel no GPU, stick boots, i can see ugoos logo for a split second, an then i get parallel white lines distorted.
With 4 kernel no GPU and no DDR, i get the ugoos logo and stuck at this.
I have the MK802IV from rikomagic.
Any advise would be grateful. Everything i try with kernel that have the gpu or ddr unlocked isn`t working for me. The cpu works well with o/c till 1.9mhz, but i can`t use any unlocked kernel, not even the no gpu no ddr one.

What rom?