Neomode Custom Rom MK809III Version 3.1 Android 4.4.2 *Update*

[marcospereira]

Compatibility CX-919 / BT-919

Someone tested this ROM in the CX-919 models or BT-919? Did it work?

[Evergorn]

For me it works without major problems but I have a cx919 with ap6220.

[basarturgut]

Hey!

Hi everyone. Before asking something, I want to say "Thank you" to neomode for good work.

I am trying to use opera dvbs1 with android mk809 iv stick. I build every module for dvb support on mk809 iv kernel 3.0.36+. It did the trick and my stick detected usb dvbs. But it shows an error like below.

<6>[   81.265279] DWC_OTG: ********soft connect!!!******************************
***********
<6>[   81.271268] DWC_OTG: USB SUSPEND
<6>[   81.371579] DWC_OTG: USB RESET
<6>[   81.395377] android_work: sent uevent USB_STATE=CONNECTED
<6>[   81.428144] android_usb gadget: high speed config #1: android
<6>[   81.428493] android_work: sent uevent USB_STATE=CONFIGURED
<6>[  134.017489] dvb-usb: found a 'Opera1 DVB-S USB2.0' in cold state, will try
 to load a firmware
<6>[  134.030687] dvb-usb: downloading firmware from file 'dvb-usb-opera-01.fw'
<6>[  134.030753] DWC_OTG: dwc_otg_hcd_urb_enqueue urb->transfer_buffer address
not align to 4-byte 0xdb9bfd3f
<3>[  134.030805] dvb-usb: could not stop the USB controller CPU.
<6>[  134.030840] DWC_OTG: dwc_otg_hcd_urb_enqueue urb->transfer_buffer address
not align to 4-byte 0xdb9bfc35
<3>[  134.030899] dvb-usb: error while transferring firmware (transferred size:
-1, block size: 16)
<3>[  134.030943] dvb-usb: firmware download failed at 21 with -22
<4>[  134.031030] opera1: probe of 2-1.4:1.0 failed with error -22
<6>[  134.031331] usbcore: registered new interface driver opera1
root@rk3188:/system/lib/modules #

I traced this error on web and found out it was some kind of dwc_otg bug(http://www.freaktab.com/showthread.p...ot-align-error). I compiled some kernels to fix this bug but none of my compilations booted. I couldnt find config.gz file in /proc folder when I look. So I stuck! I am newbie in this kernel compilation stuff. Can you lead me to light Or may be a kernel with dwc_otg fix. Thanks!

[vonuzu]

Are the download links broken or is it just me? Cant download the Firmware, old and new.

Please tell if there is another links or mirror..
Thanks

[gonzorn]

Works on MK 809 III (RK3188T & RTL8723BS)

[mongkok]

How did you get this firmware to work? I have the same Realtek 8723bs based MK809III and Wi-Fi and BT does not work. Replace the kernel gets me Wi-Fi but BT never worked.

[popeye]

Reset button does not work after flashing

After flashing, wifi-bt does not work, trying to flash a kernel to replace, but recovery button does not work anymore. Lappy does not detect stick when plug into usb.

What do you do when the reset button stops working, in such a case?

[ikerg]

Neomode Custom Rom MK809III Version 3.1 Android 4.4.2 *Update*

After flashing, wifi-bt does not work, trying to flash a kernel to replace, but recovery button does not work anymore. Lappy does not detect stick when plug into usb.

What do you do when the reset button stops working, in such a case?

A shortcut of two pins will back the to recovery mode.
Depending on chip you will have to figure out which pins should be shortcut

[ikerg]

Neomode Custom Rom MK809III Version 3.1 Android 4.4.2 *Update*

After flashing, wifi-bt does not work, trying to flash a kernel to replace, but recovery button does not work anymore. Lappy does not detect stick when plug into usb.

What do you do when the reset button stops working, in such a case?

A shortcut of two pins will back the device to recovery mode.
Depending on chip you will have to figure out which pins should be shortcut

[marteen77]

Waiting for the new version

Hi Neomode. Are you planning to post a new version of this rom? It's been several month you said you were working on the next one. By the way, this rom has been working excellent since the moment I installed it.
Thank you.

[webjo]

Hello,

I installed this rom for MK802IV to test but I have no keyboard.

Is there a version KK for MK802IV AP6210?

Thank You

[Stainy]

Edimax wifi module with mk802IV

Hi... I`ve started using my Mmk802IV again, had to moved it so I can`t use my powerlines any more.
I want to you use my Edimax nano wifi module ( because the wifi on it is crap ) Can anyone point me in the direction of what to do? I`m pretty handy with the OS.. but I don`t know what I need and where to put drivers etc..
thanks

[Starc86]

CYXTECH RK3188 909 V1 1

Hi i have a Question i have Buy a Cozyswan S400 but it looks like the same Board MK 809 iii
The Board is a CYXTECH RK3188 909 V1 1 with AP 6210

Can i use this Neomode Rom for me ?

[stipey_up2000]

Yes, it works like a charm. In fact , if Im not wrong S400 is actually a 809IV.

BTW I would like to ask which kernel best suits for this model. Does the default kernel for this ROM include the shutter fix?

Thx

Hi i have a Question i have Buy a Cozyswan S400 but it looks like the same Board MK 809 iii
The Board is a CYXTECH RK3188 909 V1 1 with AP 6210

Can i use this Neomode Rom for me ?

[Rigattoni]

Works on MK 809 III (RK3188T & RTL8723BS)

Does´nt work on mine with the same combination...
No Wifi and not BT possible.