Tronsmart Vega s89 Standard/Elite FAQ - READ THIS FIRST

[Lokie]

Hi,

I have similiar question in addition to above..
When I put the device to standby (by using the remote control red power button), it goes to standby with Red LED . I can switch it on again by pressing the remote control power button.

However, if the device ocassionally flash blue light for a few seconds during standby, once this happened, I no longer can wake up the device by using the remote control. I have to press the main power button at the back of the box to wake it up.

I am using the latest 102k firmware. Anybody have similar problem ?

Thanks.

Yea this is very common. It because the unit wakes up to do somthing (on a timer). I suspect its because its trying to sync. Disable the sync of google account and see if it stil does it? PM me if it works (the flashing led prob).

Regarding the freeze while sleeping - this is also very common. There is a solution in the meantime that seems to work. Enable debugging and select the Screen always on setting. (See the thread one level back)

[noderat]

Re: Tronsmart Vega s89 Standard/Elite FAQ - READ THIS FIRST

There is an air mouse with the Vega S89 in the box ? Thanks

Envoyé de mon GT-N7100 en utilisant Tapatalk

No there is no included air mouse in the Vega.

Sent from my mobile device. Please excuse any typos.

[Addyhash]

Not sure if it has already been requested, but can the OP update the first post to include the 89-H model and it's compatibility (if so ) with the other model's firmwares...

[leo5111]

does anyone know if the s89H has the hdmi problem? or is it just the regular s89? thanks

[Saris]

device reboots when playing

when playing asphalt 8 the device (elite version) reboots after few minutes of racing. it's possible that the issue is related to 1.2 ROM version itself or it's a hardware fault? Can someone test it please?

[jonpitt]

Toothpick query

Nubie - not wanting to brick my S89 on first attempt to upgrade firmware;
so - using the SD card method, at what stage do I remove the toothpick from the reset-hole?

[Lokie]

Nubie - not wanting to brick my S89 on first attempt to upgrade firmware;
so - using the SD card method, at what stage do I remove the toothpick from the reset-hole?

With the USB burning tool running, remove it once you see it detect the device. Its in chinese but you should see it doing someting

[rad]

With the USB burning tool running, remove it once you see it detect the device. Its in chinese but you should see it doing someting

Pity he said with the SD Card

Remove it once you see the initial graphics on the screen, you should then see the android guy on his side 20 seconds or so later.

[Lokie]

Pity he said with the SD Card

Remove it once you see the initial graphics on the screen, you should then see the android guy on his side 20 seconds or so later.

Oh yea sorry... dangerous method. But its impossible to hard brick. I had to resort to bootable SDcard & pin shorting once when I buggered my booltloader & recovery.

[rad]

Oh yea sorry... dangerous method. But its impossible to hard brick. I had to resort to bootable SDcard & pin shorting once when I buggered my booltloader & recovery.

aye me too, was it my "how to" that got you out of it.

Scarey shit that one.

[Lokie]

aye me too, was it my "how to" that got you out of it.

Scarey shit that one.

Yea, I followed your thread fervently until you guys eventually got it unbricked. The whole recovery is still not very precise with the tool bombing out during boot flashing?
(I might have purposely bricked mine lol )

[jonpitt]

Toothpick query

aye me too, was it my "how to" that got you out of it.

Scarey shit that one.

Thanks, guys - I'm glad I asked!

[papampi]

How do I get 5.1 Surround Sound audio?

• [*=left]
  • [*=left]Navigate to XBMC Settings.
    [*=left]Navigate to System.
    [*=left]Change your Settings Level to Expert.
    [*=left]Navigate to Audio output.
    [*=left]Set Number of Channels to 5.1
    [*=left]Set Keep audio device alive as you like. (This will keep your AVR from turning on and off when there is no sound playing in XBMC.
    [*=left]Make sure Enable passthrough is selected.
    [*=left]Enable Dolby Digital (AC3) capable receiver
    [*=left]Enable DTS capable receiver.
    [*=left]Exit out of settings and enjoy your 5.1 surround sound!
  
  [*=left]

I cant get it to pass through DTS and only get hissing sound when I enable dts capable receiver
mine is on finless 1.6 with xbmc-20140427-2372235-Gotham-armeabi-v7a-Tronsmart

any idea how to get dts pass through ?

[SuMo]

[/LIST]I cant get it to pass through DTS and only get hissing sound when I enable dts capable receiver
mine is on finless 1.6 with xbmc-20140427-2372235-Gotham-armeabi-v7a-Tronsmart

any idea how to get dts pass through ?

Did you change settings in Vega firmware from pcm to hdmi or spdif?

[papampi]

Did you change settings in Vega firmware from pcm to hdmi or spdif?

sure i did