Stock Firmware - Beelink S82/M8 - MXIII 1/2G - Official FW Releases from Beelink - user feedback thread

[no_spam_for_me]

Bell app fixed in this rom no tweaks needed so far so good why xbmc 13.4 ? There isnt even one out in xbmc.org

Yes oman can u please tell me what xbmc is on the 111k4 I like it so far and it gives me the option to minimize which I couldnt in the last rom great work

He talk about SPMC =>

:
1.Update xbmc (Based on SPMC13.4.0 --Thanks to koying);
:

Normally you can also install parallel every kodi you want...

[londonshore]

Never heard of spmc but thanks

[londonshore]

Netflix works well on the 111k4 so far tried one movie and normaly it would take a minute to focus in this time went good into the picture so netflix alot better on 111k4

[dlangejc]

Stock Firmware - Beelink S82/M8 - MXIII 1/2G - Official FW Releases from Beel...

Got sum issues here trying to update. Currently on 108K4 which was flashed with the AML USB tool. Now trying pin hole method to upgrade to 111K4.
Can't seem to get into recovery and if it does the Android guy falls over.
Can see the files on the SD card and I have the correct 3 files. Tried formatting SD and used another SD card but the same result. Tried with a reboot recovery app but the same result.

Any ideas?

Is this the correct recovery? please see attachment 😄

[fantom2009]

Stock Firmware - Beelink S82/M8 - MXIII 1/2G - Official FW Releases from Beelink - user feedback thread

Got sum issues here trying to update. Currently on 108K4 which was flashed with the AML USB tool. Now trying pin hole method to upgrade to 111K4.
Can't seem to get into recovery and if it does the Android guy falls over.
Can see the files on the SD card and I have the correct 3 files. Tried formatting SD and used another SD card but the same result. Tried with a reboot recovery app but the same result.

Any ideas?

Is this the correct recovery? please see attachment 😄

[ATTACH]9392[/ATTACH]

Me, too.

[Magnus33]

I find internet wifi faster which is awesome on my mxiii so far

Yeah noticed that myself that it seemed to be rather quick to do stuff over wifi.

[Magnus33]

What about the video (codec) quality?
Any improvements, or at least any other noticeable changes?

Yes they clearly been worked on.
Playback before often had audio/video sunc issues with audio lagging behind the video.
Not to mention playback of some media just looked crappy.

I yet to see either of those problems now and netflixs seemed to pop straight into focus.
Not sure what res netflicks is playing at but this firmware is a must upgrade.

[dlangejc]

Stock Firmware - Beelink S82/M8 - MXIII 1/2G - Official FW Releases from Beel...

Yes they clearly been worked on.
Playback before often had audio/video sunc issues with audio lagging behind the video.
Not to mention playback of some media just looked crappy.

I yet to see either of those problems now and netflixs seemed to pop straight into focus.
Not sure what res netflicks is playing at but this firmware is a must upgrade.

@Magnus33 Which version were you on prior to 111k4? Trying to establish why I can't upgrade ... Downloaded the files twice already 😝

[Magnus33]

@Magnus33 Which version were you on prior to 111k4? Trying to establish why I can't upgrade ... Downloaded the files twice already 😝

Upgraded from the last 109k.

Are you using everything from the download or factory/par files from older releases?

[dlangejc]

Stock Firmware - Beelink S82/M8 - MXIII 1/2G - Official FW Releases from Beelink - user feedback thread

@Magnus33 I am using everything from the new download. The 3 files, recovery, Amlogic parameter file and the zip file.

factory_update_param.aml
recovery.img
k200-ota-20141218.zip

Edit: Going to download the img file for 109K4 and flash and see if it makes a difference.

[Magnus33]

@Magnus33 I am using everything from the new download. The 3 files, recovery, Amlogic parameter file and the zip file.

factory_update_param.aml
recovery.img
k200-ota-20141218.zip

Edit: Going to download the img file for 109K4 and flash and see if it makes a difference.

Or try finless mode of 109k.

There also updating from the update app if the button push method doesn't work.

[dlangejc]

Stock Firmware - Beelink S82/M8 - MXIII 1/2G - Official FW Releases from Beelink - user feedback thread

I think there is something wrong with the Recovery on the NAND. OTG doesn't pickup via the AML burning tool. SD doesn't work, tried a factory reset and cannot get past the Google TV loader, it boots into Android yet no indication that any apps have been removed. WTF!
Apps are all there tried to reboot to recovery via Petrus reboot app to load fw from SD but just get the Google TV stock boot loader. At least it works but no recovery console it seems. Even took the box apart to make sure everything is making contact. On a positive note my OTG port feels rock hard, lol and the SDCard now slots in like it should, lmfao 😄 I'll carry on tommorow, thanks for the suggestions guys, you rock as usual.

[Finless]

There was a bad recovery that came out. Minix has it on the X8H Plus as well.

When I do my ROM I will look into it. Bottom line you will need a good recovery on SDcard.

Bob

[londonshore]

In order to get this rom installed I had to use toothpick method with only the 3 files on a sd card it was stuck on finless image doing it from the update so thats the only way it worked on my mxiii cant wait for ur rom bob more tweeks xbmc on the 111k4 is good so far

[londonshore]

Stock Firmware - Beelink S82/M8 - MXIII 1/2G - Official FW Releases from Beelink - user feedback thread

There was a bad recovery that came out. Minix has it on the X8H Plus as well.

When I do my ROM I will look into it. Bottom line you will need a good recovery on SDcard.

Bob

Bob maybe see to fixing the bluetooth on ur update would be awesome if u can