MK809III - KitKat 4.4 - SMIC717394 ---- 1080p ROM

[pirondello]

Hi guys,

short question: will it work on mk802iv?
i have old wifi version (rtl8188).

i have been playing with many roms but none is as good as official one,
try to root the official 4.4.2 firmware but no success.

thanks

Try using this rom with the kitkat kernel rtl8188 from d33's thread. You should have running wifi and bt.

[bigiuly]

Try using this rom with the kitkat kernel rtl8188 from d33's thread. You should have running wifi and bt.

i already tried but not working with d33 kernel

[magnemann]

Will this rom work on my 720p tv?

sorry for this newbee q.

[pirondello]

i already tried but not working with d33 kernel

Weared, runs fine on my mk809III_rtl1181eu chip. Did you try the mo123 kernels?

[josan420]

Wifi not working

I flash a w2comp custom firmware on my MK809III and since then my Wifi and bluetooth both are not turning on.
I tried this rom too, but same problem. Bluetooh and wifi are not turning on. Please help me. Any suggestion???

[maxelcrocao]

I've tried this rom but doesn't work with my hw..
I've found a rom with kitkat that works with old bluethoot and wifi but sound doesn't work,
could you please put the patch for hdmi sound ?
thanks

[nghalion]

*
SMIC: Thank you again for a fantastic rom! Im still running V2, but want to go to V4 this weekend.
Everything is performing like a dream with only a few exceptions. I still havent identified whether Im the only cat affected by the 1.8ghz full range kernel responding with 1.6ghz speed cap upon boot. Ive also run into odd issues with some music players. The Soundcloud app plays only a second of any given track and then advances to next song, but it must be an app or server issue regarding the device , as even my phone and Nex7 tablet exhibit similiar behaviour. The principle difference being that all my other devices play near full tracks before switching songs automatically. My guess is that the Soundcloud servers dont recognize my device identifier and prompt a track bump for some reason. Even then, I'm not sure why.
Winamp has never loaded on screen with my stick, but I was hoping the fw switch would alleviate the issue. It hasn't. The app supposedly runs but refuses to do anything but give home screen when I try to use it. Have yet to ever see it's interface on my mk802iv. The "Music" app is odd as well, as it shuts down to home screen when I attempt to play a song through internal, ext sd or usb drive.

Im not looking for answers so much as to identify if im the only one with these questions. I'm of the belief that I may have transported an issue from previous fw installs when restoring data and settings in this rom.
Anyone here seeing these issues as well?

Sent from my SGH-I337M using Tapatalk

I also have the same "Soundcloud" problem. Add to that some video apps like "Viral" won't play video. I'm using QS2 rom on Imito QX1.

cheers

[pelias]

hello, how did know wifi version on my 809III?
best regards

[mechaone]

Re: MK809III - KitKat 4.4 - SMIC717394 ---- 1080p ROM

I also have the same "Soundcloud" problem. Add to that some video apps like "Viral" won't play video. I'm using QS2 rom on Imito QX1.

cheers

Hopefully the devs will fix the "jumping tracks" problem soon. Although I noticed the issue months ago and thought it was an issue of my causing, users of various tv sticks and boxes are starting to comment about it in the Play Store Soundcloud reviews string.

hello, how did know wifi version on my 809III?
best regards

Unless specified on the site you purchased the stick from, the only other method of determining what net chipset you have is by cracking open the stick and visually checking for it. Look for a chip with "MTK" (Mediatek) "AP" (Broadcom) or "RTL" (Realtek) script on top.

Sent from my SGH-I337M using Tapatalk

[hawkeye]

MK809III with AP6210 wifi not working

I have a MK809III with AP6210 and I flashed V4 with all the stock settings (as in I didn't change anything like the kernel). And my wifi won't turn on.

Do I need to use one of the other kernels in the package?

Thanks
Hawkeye

[loopi]

help

Hi guys,

This is my first ROM for the MK809III. I dont even have the MK809III to test it so I had to rely on you. Few members already test it with success.

This ROM is for the 809III with AP6210 wifi and bluetooth boards V2 and V3.

You have 1080p and extra kernels 1.6, 1.7 and 1.8 in stock DDR or overclocked to 667.

The 1080p ROM

• Kitkat 4.2
• HD resolution (1920x1080) - 1080p
• 1.8V LCD support (to prevent flickering HDMI on some units especially the RK3188T)
• Proper root
• System debload
• Installed the following apps: AnTuTu Benchmark, Beyond XMBC, MX Player and Codec, Reboot, Text Droider dpi and YouTube
• VsyncFix - to fix the skipping frames on video playback
• DTS and 5.1 AC3 pass-through support
• Busybox and supersu updated
• Tcp tweaks added
• No-Frill cpu control

smic717394_809III_1080p_V4.4.02_ROM V2

smic717394_809III_1080p_V4.4.2_ROM_V3



----- New versión ROM: V4----

On the rom side, I fixed few bugs with the daemon and update the supersu and binary to latest version 2.01, install twrp recovery, added few more apps, remove the beyondxbmc as in kitkat the HW acceleration doesn’t work yet, change the default wallpaper to a simple brushed aluminium look, modified the Launher3.


Beside the standard apps, the new apps installed in this rom are:


- Antutu – Benchmark app.
- Autorun – This app allow you to automatically start one or more apps when the unit starts.
- No-frills CPU control – Allow you to change the CPU max and minimum, and governors.
- Reboot by petrus – Updated to v 1.2.2
- SPMC 13.2 – XBMC for RK3188
- Terminal Emulator
- textdroider_dpi – allow you to change the dpi to a smaller or larger one.
- install TWRP recovery.




On the kernel side, I implemented the video shutter fix, modify the rockchip hdmi drivers so if it doesn’t mute when the HDMI is disconnected or in case the SOC detects your connection as DVI.


The kernels are now compressed, mainly to prevent patching not by you fine people but by company that uses the ROM made by the great devs from Freaktab. We put allot of work and hours into this ROMs and few companies think that if they download than patch the kernel with their brand its theirs, not fairs. So here are my terms for using this rom. As a private user and as a member of this page you can use the rom as you like, without any limitation what so ever, but I would appreciate if you leave my boot animation, it’s all I have to show after all. If you want to use the ROM commercially, you cannot remove any of the branding from the ROM and from the Kernel, you can use it as you wish but as it is, if you want to change it you can get in touch with any dev from this side only.




Now all that been said let’s get back to the kernel. I created 10 versions. The kernels marked h have only high frequency’s.


For example a kernel kernel_1.6_667 will have cpu 312, 504, 816, 1008, 1416 and 1608 and the GPU 664 and DDR 200, 266, 300, 400, 600, because the CPU can drop all the way to 312 when not used allow the unit to run cooler and more stable. The kernel kernel_1.6_667 will have cpu 1200, 1416 and 1608 and the GPU 664 and DDR 200, 266, 300, 400, 600, because the CPU will only drop as 1.2 as min speed the box will run hotter but you get more points on benchmark (not real performance).




As usual, I hope you guys like it, and since next week I´m off in holiday, I may not be able to reply as fast but I hope you enjoy the ROM.
Note:

You have to rename the parameter before opening the RKAndroidTool. Also please note that you can only flash the parameters when you flash the rom and not after so if you want to change the size you will have to flash again so back up your data.

Also When you flash the ROM do a EraseIDB before (dont do it if you just flashing the kernel)

After flashing with a different system partition (parameter) size than your previous ROM - you need to go to System -> Storage and mount SD card. You will get a notification saying something about "Damaged Memory". Open this notification, and format the SD card.


smic717394_809III_1080p_V4

I have problem with start up when i plug in my tv i get a error code and newer wont start up the error is

frst error is device can not flash mode because is not a msc device that is happen when i wont to start up a reebot to flash everething alse is working

another ne error failed to mount meta data

[smic717394]

Re: MK809III - KitKat 4.4 - SMIC717394 ---- 1080p ROM

I have problem with start up when i plug in my tv i get a error code and newer wont start up the error is

frst error is device can not flash mode because is not a msc device that is happen when i wont to start up a reebot to flash everething alse is working

another ne error failed to mount meta data

I asume you have a MK809III. Try to flash all the partitions especially if you moving from JB to KK

[bigiuly]

smic717394, please make a kernel for old wifi RTL8188

thx

[josan420]

MEDIATEK mt5931sa / mt6622n wifi/bt Chipsets

Is it working on MK809III with MEDIATEK mt5931sa / mt6622n wifi/bt Chipsets?????

[smic717394]

Hi, ill start working on a mediatek first then rtl