HPH RK3288 ROM v1.2 by mo123 (20141117)

[digitalriver]

Can you post a link to latest UBox or Beelink firmware that work with your remote?
If you use the kernel.img & resource.img from UBox with the ROM, remote should work.
Might also need remote's *.kl file in /system/usr/keylayout folder for all the buttons to work.
The power button of the remote is mapped inside the kernel of Ubox.

Change this in /system/build.prop file
ro.product.device=hammerhead to ro.product.device=rk3288
Need to be rooted and enable RW permission on system in ES File Manager.
If frequency switcher still doesn't work, then changing more things can make it work but then Youtube 1080p will not work. Please test if only above change still make Youtube 1080p work.

no,no, remote control works nice in this firmware. I think, the problem is incompatibility Ubox hardware with HPH firmware. I recorded little video, how ubox don't want "power off". Not only from remote, from system bar - too. The device is switched off and immediately switched on

[Shadi86]

HPH RK3288 ROM v1.2 by mo123 (20141117)

no,no, remote control works nice in this firmware. I think, the problem is incompatibility Ubox hardware with HPH firmware. I recorded little video, how ubox don't want "power off". Not only from remote, from system bar - too. The device is switched off and immediately switched on

I have same problem like you

[m1pnk]

you see kodi 14.1 mo ?.... android fixes

[digitalriver]

Can you post a link to latest UBox or Beelink firmware that work with your remote?
If you use the kernel.img & resource.img from UBox with the ROM, remote should work.
Might also need remote's *.kl file in /system/usr/keylayout folder for all the buttons to work.
The power button of the remote is mapped inside the kernel of Ubox.

So...I reflashing kernel.img & resource.img from UBox and now all good with switching off. Thank you! But I'm not sure, do not get lost if the tweaks wi-fi and other interesting changes from your firmware. I using kernel from here: http://www.freaktab.com/showthread.p...l=1#post247938

Change this in /system/build.prop file
ro.product.device=hammerhead to ro.product.device=rk3288
Need to be rooted and enable RW permission on system in ES File Manager.
If frequency switcher still doesn't work, then changing more things can make it work but then Youtube 1080p will not work. Please test if only above change still make Youtube 1080p work.

Thank you! Now everything good! And Youtube also work 1080p

[digitalriver]

Yes, you will loose all the improvements in the kernel from the last two months.
Can try to use kernel from this newer UBox firmware of 19/12/14
http://www.mediafire.com/download/68...k4110_1219.img

I have this firmware, but after unpacking Im not find kernel.img. From this firmware Im took resource.img. Probably, the kernel there in the boot.img. And I dont know, may I flash "boot.img&resource.img" instead of "kernel.img&resource.img" ?

[hueb_s]

I am running the 1.4 Rom on Beelink R89. Works great with the already known problems (power off not working, power led not changing, cannot change to physical keyboard).

But I found an issue with the ethernet MAC address. It is changing at every reboot. I need a static MAC to be able to implement QoS rules for the box. Is there any reason why this is changing at reboot?

[Guest]

But I found an issue with the ethernet MAC address. It is changing at every reboot. I need a static MAC to be able to implement QoS rules for the box. Is there any reason why this is changing at reboot?

My MAC doesn't change, but I have a problem having my ethernet IP static. I enter all needed data (gateway, netmask, dns) in "Static IP Settings", but next time I go into settings, nothing is saved and all fields are empty again.

One other problem I've been thinkering about for awhile, is not been able to start FTP server inside Solid Explorer. Anyone using it, so it can be confirmed? Whether I use LAN or WLAN connection, the error message says "failed to bind to address 0.0.0.0". Fake Wifi Connection xposed module doesn't help either, although it helps configuring the server for SSID I'm connected to (otherwise I get unknown ssid and "none" for server address, which should be something like 192.168.x.x).

[Electroman]

Rom works ok on Ugoos UT3 4gb 32gb with fan, except fan never runs.

[Henkdevries]

Hi,

can i use this rom on tronsmart r28.
if yes, will the power led (red&blue) and remote function correctly?

thanks!

[Eugene]

Strange that Tronsmart is not providing support or new firmware anymore.
They were the first to release RK3288 devices.

First not mean best Geekbuying is very big trading company, have many products labeled Tronsmart, not so easy to support all

[Guest]

Strange that Tronsmart is not providing support or new firmware anymore.
They were the first to release RK3288 devices.

It seems to me they are more focused on AllWinner SoC's.
Speaking of which, is there any RK3288 vs AW80 tests that have some credibility (not just Antutu scores)?
Many times I asked myself should I have waited a bit more and purchased one of AllWinner devices...

[Henkdevries]

Yes, just replace with your resource.img from stock tronsmart ROM.

Strange that Tronsmart is not providing support or new firmware anymore.
They were the first to release RK3288 devices.

Thank you, i will try that.

[sawbones999]

Yes, just replace with your resource.img from stock tronsmart ROM.

Strange that Tronsmart is not providing support or new firmware anymore.
They were the first to release RK3288 devices.

I have tried this and it is not working. I also tried using stock boot.img. I was only able to get tronsmart working with stock resource.img and the last kernel you made and posted for v1.2.

I tried that kernel with this rom and no go.

Cheers,
-SB

[Henkdevries]

I have tried this and it is not working. I also tried using stock boot.img. I was only able to get tronsmart working with stock resource.img and the last kernel you made and posted for v1.2.

I tried that kernel with this rom and no go.

Cheers,
-SB

I can confirm this does not work, unfortunally.

any suggestions?

thanks

[sawbones999]

Can't use a different boot.img as it will not work.
You have to use the included kernel or one after 26/12/14 from Tronsmart(that doesn't exist at the moment).
Only solution is to keep asking Tronsmart for new firmware.

Yeah, I just downgraded to v1.2 so that I could use tronsmart boot.img and resource.img to make IR work properly. I tried just resource.img but didn't work.

Do you or anyone else in the thread know how to enable bluetooth at boot? Most other fw does this automatically, but not yours. This is not SO big a deal now that IR is working and BT can be enabled that way, but it's really annoying when you have to connect a mouse (bc no IR) every time you restart, just so you can connect bt keyboard/touchpad.

Thanks!
-SB