Announcement

Collapse
No announcement yet.

Announcement

Collapse
No announcement yet.

[Pipo Project] M6 Pro

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    This is KitKat rom right? I'm currently using RR 1.8.2 KitKat and if i want to install this custom rom, should i tick the Loader or not?

    Comment


      My first freeze with v1.1freaktab rom

      Hi all,

      I just had my first freeze, I had to do the pin-reset, after which I was able to reboot normally.

      Question 1: is there a way of finding out (the next time) which program was running at the time?

      Question 2: This time I left my M6Pro not charging this night, because it still had 40% left.
      Now the battery is down to 26%.
      Could the freeze be related to a lower battery voltage? If so, is there a way of increasing the cpu voltages just a bit to avoid this?
      I will install 'the alternative kernel' to test with that as well.

      I will keep you posted, un saludo,

      Satbeginner

      Comment


        Originally posted by lecksmatt View Post
        This is KitKat rom right? I'm currently using RR 1.8.2 KitKat and if i want to install this custom rom, should i tick the Loader or not?
        The real answer must come from the developers (they know what's going on inside), but I was running 1.8.2 as well, and when I flashed I ticked the loader.
        I had no problems doing it like this.

        Un saludo,

        Satbeginner

        Comment


          It's the same loader. No problem checking it or not unless you are upgrading from JB.

          You might be able to run a logcat after a freeze and see what happened.
          Randy
          Freaktab Developer, Product Reviewer, Moderator and "Flashaholic".
          Read my BIO Here
          Be sure to donate to support Freaktab.com. If any of my development work makes a positive difference for you, please make a donation to support future RileyROM's.
          Donate here

          Comment


            Custom kernels from giouncino - is it possible?

            Hello to everybody. I'm new to this forum. Recently i bought my Pipo M6 Pro tablet. I tried Dmr48's firmware from 4pda.ru. That firmware is based on RileyROM 1.8.2 with some customisation. On this firmware I did experiments for combination with custom kernels from giouncino and kernel_GPS_1.4_cpu1704h_VERY_LOW_V1_gpu600_ddr744. img was very good for me: fast and stable. . In this combination my tablet take in Antutu 5.2 score 26692. Now I've flashed FreaktabROM v1.1. It's working good, some previous problems go away (like buggy video in Skype) but as for me on overclocked kernel from giouncino the tablet was faster. So i want to ask: is it possible to use a custom kernel version 1.4 from giouncino with FreaktabROM v1.1? If no, is it possible to make custom overclocked kernel with same clock parameters for FreaktabROM v1.1. Thank you for answers.

            Comment


              The most significant fixes to this firmware was done inside the kernel. I'm afraid you would loose some of the fixes by flashing back to the older OC kernel...but it should boot and run just fine. You would just have some of the old problems previously encountered...that's all.
              Randy
              Freaktab Developer, Product Reviewer, Moderator and "Flashaholic".
              Read my BIO Here
              Be sure to donate to support Freaktab.com. If any of my development work makes a positive difference for you, please make a donation to support future RileyROM's.
              Donate here

              Comment


                In this case is it possible to add this clock frequencies for CPU and RAM to new kernel? For example 216-1704 MHz for CPU & 744 MHz for RAM like it was in giouncino kernels

                Comment


                  I will have to let the kernel guys answer that.
                  Randy
                  Freaktab Developer, Product Reviewer, Moderator and "Flashaholic".
                  Read my BIO Here
                  Be sure to donate to support Freaktab.com. If any of my development work makes a positive difference for you, please make a donation to support future RileyROM's.
                  Donate here

                  Comment


                    OK, let's wait for the kernel gurus . In any case thank you for answers.

                    Comment


                      Works Smooooth, except for these 2 games?!

                      So far, everything is working great! When I tried to install the 2 'Rayman' games (and the obb files) it crashes and says can't start.. I've tried every version I can find on the web (about 4 for Jungle and 2 for Fiesta). Any ideas?! I like to use them to show off the graphics for my friends I'm building for..
                      (4.2.2 works with them, of course) Also, not using ART, if it matters.
                      -Thanks!

                      Comment


                        Hi!
                        Is it possible to fix hdmi screen timeout in next versions? I'd like my tablet's screen switchs off when i'm connecting it to TV, it will help to save a lot of battery's energy.
                        Thank you in advance.

                        Comment


                          I think it would require a new app to overide the default hdmi mirroring behaviour

                          Comment


                            You can use this to turn the screen off when mirroring

                            Comment


                              try this

                              Originally posted by sleepums View Post
                              So far, everything is working great! When I tried to install the 2 'Rayman' games (and the obb files) it crashes and says can't start.. I've tried every version I can find on the web (about 4 for Jungle and 2 for Fiesta). Any ideas?! I like to use them to show off the graphics for my friends I'm building for..
                              (4.2.2 works with them, of course) Also, not using ART, if it matters.
                              -Thanks!
                              As I suggested in the Riley 1.8.2 thread #911 try this and tell as if it works:
                              Anyone having problems with game freezing, ie Boom beach etc. Here's the solution I found on another forum. Tick “Disable HW overlays” under the Developer options in settings and games work fine.

                              Comment


                                storage

                                I have the 32GB m6pro. After flashing PipoM6Pro_ROM_141117.zip, I only see a total of 29GB (~4GB in internal + ~25GB in NAND flash) in Setting -> Storage. Is this expected? Where is the missing 3GB? Also, there is no incognito option in the stock browser. Is this known issue?

                                Comment

                                Working...
                                X