If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
That's sad :-( I have my Wifi chip prepared for replace, but now, when you say it won't help, there is no option left :-(
I am using this tablet now with an USB-to-Ethernet adapter, and was planning to at least use it with an USB-Wifi dongle, but I don't know, which wifi chipsets the installed drivers support. Does someone know the chpiset list, or knows the way how to check it?
Hi,
I found out my soldering iron tip had a voltage on it, so when I replaced the chip I blew it while doing it!!
Recently I repaired/improved my soldering iron, and ordered a new chip.
The bad news: it is a hell of a job!The chip is only about 1/2 inch x 1/2 inch, and has 11 connections per side, so 44 in total!
The good news: it worked!!!
The chip AP 6476 has WiFi, BT, GPS, and FM radio in it.
The first 3 work, I cannot find an FM radio app that works on the M6Pro...
this is because there is no driver on Pipo rom to enable FM function on this chip, I wasted enough time trying to enable FM without success....
Good job replacing this small chip!
From the first page of this forum take the WIFI or 3G version 1.2 respectively to your devices type.
Read the first time users guide.
Download and change the Boot.img file in the set with this one:
Have fun.
If you are looking for the CM-LP ROM - that is not from FREAKTAB so support is on the other forum. Otherwise I would not recommend that CM-LP ROM on M6Pro because of the laggy and old JB kernel we have to use it with.
Camera fixed !
Like i said, it was a HW issue.
The connector of the camera was loose.
Strangly enough, the yellow-ish tape on top of it was still firmly attached.
So i reseated the connector and voila.... camera ok now... nothing to do with the ROM !
If it happens again , i'll glue it
I have the same problem can you tell me what I have to do to fix that
I'm having trouble with this ROM. It gets stucked in the pipo screen, sometimes, and I gets hangs. I like to try with the boot.img mentioned above in this post, but I can't download. Can someone post a working link? Or maybe I have to do something before download?
EDIT: no way. I've found the second link. I will try and tell. Anyway, thank you for your time and effort.
We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.
By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.
Comment