Announcement
Collapse
No announcement yet.
Announcement
Collapse
No announcement yet.
NEW - Beelink S82/S82H/M8/MXIII & Tronsmart S89/S89H - Finless 2.1 ROM
Collapse
X
-
Originally posted by jacadito View PostSee other thread where I describe audio dropouts, with stock 111k4 and an Onkyo receiver. Seems all to easy to blame the Onkyo, especially when I read that you do not have the problem with an earlier version of Finless.
So the good news is that it can be corrected in firmware, the bad news is that it hasn't been solved yet, neither in the stock firmware nor in a recent Finless firmware.
Many thanks to the tech experts who can sort this out
I dont get audio drops with the vega. I might add that i am not using wifi . Perhaps if you are using wifi , changing the position of the box might help.
I do get audio errors when i change the display settings to 1080p 50hz, all is well at 1080p 60hz.Uno MAS
Raspberry pi 2 > osmc
Ouya
Vega s89H > finless 2.1
Minix X8-H plus
rii i8+ & rii i25A & Yatse
Comment
-
so there is no hope for mxIII 1g/8g
im pretty much as new as a newbie gets here since this is my first post, as far as i can read i am pretty much s.o.l. for my mxIII 1g/8g, i swore i ordered a 2g but i must have went to the wrong listing when i purchased any help or inf is greatly appreciated
Comment
-
Originally posted by norm36 View Postim pretty much as new as a newbie gets here since this is my first post, as far as i can read i am pretty much s.o.l. for my mxIII 1g/8g, i swore i ordered a 2g but i must have went to the wrong listing when i purchased any help or inf is greatly appreciated
you can of course use it with stock 112K if you so desire: http://www.freaktab.com/showthread.p...eedback-thread
Comment
-
Something wrong
With this rom memory is always on 60-65%. Or 35-40% free or less. Cpu z and other about device app show that system have only 870mb total ram. Something here is not ok or this is All in one rom problem, because this is rom for mx3 1Gb too. On omans 112k4 rom i have installed max unlock cpu patch from finless 2.1 end from 1600mb total ram again schrink to 870mb. With other patch 408min ....everything is normal. I think finless already know about this. I can wait finless 2.2 maybe everything will be solved.
Comment
-
Wifi very slow speed on MXIII
Hi everyone,
I received my MXIII 2GB Version a few days ago and installed directly this 2.1 rom, every things works fine except wifi speed.
I tested with app speedtest and i get always values like these:
ping - 15-20 ms (it´s normal)
download - 0,30 - 1,8 mbps (NOT Normal)
upload - 3 - 3.8 mbps (it´s normal)
I dont understand why download speed is so slow, i cant see streams and even youtube videos correctly. I have installed the 2.0 finless rom to test but it´s the same. I also tested speedtest whith my phone on the same exact place as the tv box and i get download speeds around 35 - 40 mbps wich is normal.
Why am i getting so slow download speeds on my MXIII (2GB version)?
Comment
-
miracast ? dlna?
If I have the tronsmart connected to the tv, could see the screen of another smartphone, movies for example, on the tv through the miracast app, or in some other way? I have installed this rom, thanks..I've tried with a z2 xperia but it doesn't work .It could be problem of the HDCP ?Last edited by suaoker; 14 February 2015, 18:12.
Comment
-
Originally posted by Fleyd View PostHi everyone,
I received my MXIII 2GB Version a few days ago and installed directly this 2.1 rom, every things works fine except wifi speed.
I tested with app speedtest and i get always values like these:
ping - 15-20 ms (it´s normal)
download - 0,30 - 1,8 mbps (NOT Normal)
upload - 3 - 3.8 mbps (it´s normal)
I dont understand why download speed is so slow, i cant see streams and even youtube videos correctly. I have installed the 2.0 finless rom to test but it´s the same. I also tested speedtest whith my phone on the same exact place as the tv box and i get download speeds around 35 - 40 mbps wich is normal.
Why am i getting so slow download speeds on my MXIII (2GB version)?
Comment
-
Slow ethernet speeds (down to 30% of finless 1.8)
Originally posted by Fleyd View PostHi everyone,
I received my MXIII 2GB Version a few days ago and installed directly this 2.1 rom, every things works fine except wifi speed.
I tested with app speedtest and i get always values like these:
ping - 15-20 ms (it´s normal)
download - 0,30 - 1,8 mbps (NOT Normal)
upload - 3 - 3.8 mbps (it´s normal)
I dont understand why download speed is so slow, i cant see streams and even youtube videos correctly. I have installed the 2.0 finless rom to test but it´s the same. I also tested speedtest whith my phone on the same exact place as the tv box and i get download speeds around 35 - 40 mbps wich is normal.
Why am i getting so slow download speeds on my MXIII (2GB version)?
Unfortunately, something did go wrong with the connections... Both wifi but especially Ethernet connections have more than halved... On Ethernet I was getting 65 - 70Mbps, but after the upgrade (from 1.8 to 2.1, on my tronsmartS89-H), I now barely get 25Mbps...
The problem is that this prevents me from using any VPN which, in UK (where they restrict most sharing sites like IceFilms and 1Channel) is an absolute must!
I'm not complaining (I actually just made a donation to Bob for his excellent work!), I'd just like to see if anybody else is getting this (besides Fleyd and myself), but more importantly, to see how we can fix this... as the way it currently "works" is not really viable for UK.
Mr. Bob, any chance you could look into this when you have a moment? Something changed between 1.8 and 2.1 specifically in terms of the network connectivity (both WiFi and Ethernet, but especially Ethernet).
Thanks a lot!! Your work is appreciated world wide!!
Andrei
PS. sorry for posting this twice... couldn't figure out how to delete (only how to edit...?)
Comment
-
Guest
What's Going On
Collapse
There are currently 2541 users online. 2 members and 2539 guests.
Most users ever online was 63,956 at 18:56 on 20 March 2025.
Comment