UPDATE - Marschmallow - Wasser Firmware for Beelink R89

[amclean123]

You can follow the guide here and follow the OP for Kodi settings for RK3288.

Thanks!

[amclean123]

You can follow the guide here and follow the OP for Kodi settings for RK3288.

Unfortunately I'm having problems with that ROM on my Tronsmart R28. I get prompted for an Android password after loading the ROM. Any idea what password is? I tried Nagrace and that didn't work.

[Laurentiu]

I`ve notice two annoying problems, first and most problematic is that on youtube the videos wich are uploaded at 1080p 60fps only can be seen/stream at 480p and the second is that the player wich is integrated on the browser dosen`t work, those three circle are runinng and the video can`t begin/run. I think that at least untill you ad the 1080p 60fps option you can fix that problem and that format 1080p 60 fps can be seen at least at normal 1080p on the next release. Rest of the rom work very good, keep the good work👍

[bloodgnome]

Using the lastest beta I messed up the SuperSU by trying to flash the latest pro via TWRP. Now I don't have SuperSU anymore and can't install it again (without reflashing). Any Ideas.

Will test TV-Out later...hope that this will be the first Version after 3.0.4 that works on my old TV.

Over HDMI it seems snappy and fast and Xposed is working too. Good work Wasser.

PS.:
I miss the "old" Power Menu with "Boot to Recovery" and "Boot to Bootloader" ect. Hope we can have that back in a future Version.

[bloodgnome]

Well tv out doesn't work. Back to 3. 0.4 where it works for that box... my ither box will stay on marshmallow as it is just snappy and fast

Sent from my Alife P1 Pro using Tapatalk

[Gormar]

Using the lastest beta I messed up the SuperSU by trying to flash the latest pro via TWRP. Now I don't have SuperSU anymore and can't install it again (without reflashing). Any Ideas.

If I would lost some files on system partition then I would reflash just System.img with Android Tool and proper parameter file.

[dragon92]

why is 160dpi, i think it is 240dpi

[sintest]

I have tested my Sandisk 64GB usb drive(exFAT), but with no luck. Testing the usb drive with other devices (PC, android phone) is fine.

YouTube is as smooth as previous release. No stutter for 720 and 1080 video through Gigabit Ethernet.

MX player video playback (720 and 1080) is also smooth through network stream. (HW+ setting is enabled)

[amclean123]

Here are some bugs that I found in Beta 1. These items worked in previous builds.
1) Microsoft Mouse is very jerky.
2) No option to select SPDIF audio in Settings > Sounds
3) No SPDIF audio
4) MX Player with 1.8 codec - dropped frames on Avatar movie MKV (30GB File)
5) Screen flashing during movie playback and during normal app usage.
6) Beta 1 doesn't support video output to my computer monitors. My monitors use an HDMI to DVI converter. I don't have an HDMI input on my monitors.

[wasser]

Hi All, marschmallow wasser firmware version 4.0.2 beta2 is released. For more infos, please take a look at the first post.
Enjoy and please don't forget to post feedbacks!

thanks
Wasser

[andreyh]

Hi Wasser!

Do you have plans to fix auto hardware deinterlacing in this version?

[wasser]

Hi all, i even remove the 4.0.2 beta2 iso image temporary because it causes the bootloop when camera is not connected to USB port.
Please don't flash this image if you don't have camera connected to USB port !!

I will upload new iso image very soon.

Wasser

[wasser]

Hi Wasser!

Do you have plans to fix auto hardware deinterlacing in this version?

what do you mean "auto hardware deinterlacing" ? could you please give more infos?
Thanks

[Gormar]

I don't want nagging you but will there be support in foreseeable future for multi windows?

Beta 1 is quite good for me with few exceptions that I can't easly correct:
1. No HEVC 10bit support.
2. No SD card support. Tommorow I will check if it is resolved in beta 2.
3. Tincore Keymapper doesn't work as expected but it might be its own fault.

Some issues I solved with external apps help:
1. After longer sleep my TV Box will not wake up. Solution: use CPU Awake.
2. Vold doesn't mount USB memory regardless file system in use (not FAT32 nor NTFS). Solution: StickMount.
3. YouTube app doesn't display HFR video (50/60fps) and what's more for such clips it doesn't allow to choose 720@30/25 even it it available. Solution: use Chrome Browser and press pause button there few times to start playback.

[digitalriver]

1. No HEVC 10bit support.
2. No SD card support. Tommorow I will check if it is resolved in beta 2.

version 4.0.2 beta2
1 Support, works fine with mx player 1.7.40 and with internal videoplayer. But not work in ZDMC - black screen.
2 Support and very-very-very nice(Thanks Wasser!!). Sd card now can to work in 2 modes:how removable memory card, and how internal memory!!! Works fine!!!!