[ROM] XannyTech Custom Mod Rom + TWRP Recovey built-in - for MINIM8SII and other devices see first post.

[Xannytech]

Well, following one video tutorial to flash via sd card I used option "force erase" and than I found out that using that option might lead to certain problems with wifi and bluetooth not working, so I was hoping that was the case. But, sadly, it was not. Still I had limited success.
I went back to stock, confirmed to have a functional bluetooth and than copied the entire factory original "bluetooth" and "lib" folders to disc. I than flash your rom and copied those too to compare with factory firmware. By using "replace and eliminate" method I found out that replacing "bluetooth.default.so" from system/lib/hw with factory version activates bluetooth. Mac address is now present is the system I can turn the bluetooth on and off in settings. However, the box can not discover other devices, nor other devices can see the box. I also tried replacing "libbluetooth_jni.so" because of a slightly different size, but nothing changed. Also, renaming and even deleting "libbt-vendor.so" and "bt_vendor.conf" does not do anything. And that's where I hit the wall.
But, maybe you now might have an idea what's going on. Or I perhaps it's time to give up.

There is no reason for most of the things you did, just bluetooth.default.so is a good idea, i told you before what you should try, i sent some files (HERE), copy them in the correct directory, give the right permisions, and then check with your bluetooth.default.so. Anyway i'm assuming that you get a Rkbt chip, without any info i can't guess
Sometimes users forget that i'm not in their heads.

[digitalriver]

There is no reason for most of the things you did, just bluetooth.default.so is a good idea,

Xannytech, thank you about idea with bluetooth.default.so! Early I dont know about this file. Now I replaced this file from my old firmware, and other files(named how files from your link,but not from your link,because with your files not works), and bluetooth now workscorrectly !!!

[Xannytech]

Xannytech, thank you about idea with bluetooth.default.so! Early I dont know about this file. Now I replaced this file from my old firmware, and other files(named how files from your link,but not from your link,because with your files not works), and bluetooth now workscorrectly !!!

they came from a nebox fw, anyway send me the the correct files so everyone with this chip can fix their issues.

[tuzlak]

There is no reason for most of the things you did, just bluetooth.default.so is a good idea, i told you before what you should try, i sent some files (HERE), copy them in the correct directory, give the right permisions, and then check with your bluetooth.default.so. Anyway i'm assuming that you get a Rkbt chip, without any info i can't guess
Sometimes users forget that i'm not in their heads.

Well, I tried those files before, and they did not work, though they seem to be the same as files I took from factory firmware. Like I said, I was able to turn bluetooth only after replacing "bluetooth.default.so". However, that got me a bluetooth, but it would not see other devices, nor it would be seen by other devices. So I checked those factory files for bluetooth, and I found out they pointed out to a "system" directory inside factory rom and a folder not present in your rom called "firmware", there is a bunch of amlogic firmwares inside. So now, after I copied that folder and set permissions I now can see other devices, but cannot pair.

[tuzlak]

Xannytech, thank you about idea with bluetooth.default.so! Early I dont know about this file. Now I replaced this file from my old firmware, and other files(named how files from your link,but not from your link,because with your files not works), and bluetooth now workscorrectly !!!

What box do you have? 1/8, 2/8, or 2/16?

[digitalriver]

What box do you have? 1/8, 2/8, or 2/16?

2/16 This box:

http://www.gearbest.com/tv-box-mini-pc/pp_612626.html

send me the the correct files so everyone with this chip can fix their issues.

in next my post.

[digitalriver]

https://mega.nz/#!ek8VibjI!FFV_CI8SO...MeRKdtDPgQj0u8
All this files from my old firmware(Z69 box). I dont know, if this files compatibles with other boxes.
P.S. But not all devices wants to connect. Handsfree connected without problems, but smartphone dont want to connect. Talking about wrong pincode. I think, some problems with bluetooth still presents.

[digitalriver]

this is little log of errors. Sound through bluetooth go to headset without problem, but in logcat i see more errors
05-08 23:04:34.806 6604 6622 I rtk_parse: : count a2dp packet timeout, a2dp_packet_count = 47
05-08 23:04:35.515 6604 6622 I rtk_parse: : count pan packet timeout, pan_packet_count = 0

[tuzlak]

2/16 This box:

http://www.gearbest.com/tv-box-mini-pc/pp_612626.html

in next my post.

I have N95 2/8 box, and they most likely use a bit different wifi/bluetooth combo chipsets so it's a hit 'n miss to have a bluetooth work on them unless it's a box the rom is intended for. But I'm not giving up yet.

ps. Do you know what combo chipset your box have?

[digitalriver]

ps. Do you know what combo chipset your box have?

Yes
Wifi-Bluetooth



Mainboard in general.

[digitalriver]

But I'm not giving up yet.

Try firmware for Sunvell T95X. from this post :

http://4pda.ru/forum/index.php?showtopic=760275&view=findpost&p=54594670

This is firmware for 2/8 box with working bluetooth. I dont try, but another peoples confirm - bt works.

[Xannytech]

I'm in uploading process of a bugfixed version of my custom.

V 2.7 What's new:
- Updated most of the apks;
- Updated first setting app;
- Fixed random GooglePlay issue (i hope);
- Fixed Netflix (should not be necessary to change build prop);
- Updated Kernel;
- Updated Bootlogo;
- Updated Bootvideo.

DOWNLOAD LINKS:

UPDATED VERSION v2.7
Flash with Amlogic_USB_burning_tool_2.0.8 or BootcardMaker v2.0.0.2 if you want to use sd method (guide):

XTMOD EX P (v 2.7) for TvBoxes with wifi chipset : AP62X2, AP4354, AP4356, AP6212, AP6212A, AP6255, AP6335, AP43458, AP6330, 8188XX, 8189XX, 8192XX, 8723XX, 8812XX, 9082XX

XTMOD_EX_P 9377 (V2.7) for TvBoxes with wifi chipset: AP9377

Enjoy!
If you like my works and would you like to offer me a beer or a coffe, or a sign of appreciation :

SEND ME A DONATION

[bajann]

I'm in uploading process of a bugfixed version of my custom.

V 2.7 What's new:
- Updated most of the apks;
- Updated first setting app;
- Fixed random GooglePlay issue (i hope);
- Fixed Netflix (should not be necessary to change build prop);
- Updated Kernel;
- Updated Bootlogo;
- Updated Bootvideo.

Enjoy!
If you like my works and would you like to offer me a beer or a coffe, or a sign of appreciation :

SEND ME A DONATION

[Hujkis]

Here It's the complete remote folder

Hi Xanny, tried this remote with A95X 2-16. Still not able to power-on with the remote. Anything else I can test?

[digitalriver]

Still not able to power-on with the remote.

For power-on you must change bootloader. First,in your old firmware(with working power-on), you must save bootloader:
su
dd if=/dev/block/bootloader of=/sdcard/bootloader.img
After, in new firmware, you must copy bootloader.img in folder sdcard, and type in terminal:
su
dd if=/sdcard/bootloader.img of=/dev/block/bootloader
After dont forget change remote.conf.

P.S.

UPDATED VERSION v2.7
XTMOD EX P (v 2.7) for TvBoxes with wifi chipset : AP62X2, AP4354, AP4356, AP6212, AP6212A, AP6255, AP6335, AP43458, AP6330, 8188XX, 8189XX, 8192XX, 8723XX, 8812XX, 9082XX
Enjoy!

rlt8723bs:
wifi/bluetooth - not work for me