[ROM] Sunvell T95Z PLUS / T95K PRO / T95U PRO - 2Gb/16Gb - SCV1 Final ROM

[karintech89]

Hi guys,

Can i install this on my Sunvell T95Z Plus 3/32GB? Or is there any Cons?

I know i can't play Netflix HD but it's only to otimize Quasar in Kodi and play some 4k movies and FHD stream movies.

Thx

[ZRas]

Thanks guys for the help. The box not being recognized is something that happens often? did you came across something like this before?

I had same problem when flashed firmware for 2GB version to my 3GB box.
To unbrick it you can do following
1) Install USB Burning Tool
2) Disassemble the box
3) Connect box to USB
4) Find memory chip and using some metal tool short-circuit pins 29 and 30. Sample:

http://4pda.ru/forum/dl/post/10425890/29-30.jpg

(Board color and components may )
5) After that it should apear in USB burning tool
6) I recomend to connect 5V PSU before flashing to be sure that device will have enough power (without 5v connected flashing fails sometimes)

P.S. is anyone know good firmware for 3GB version like this one? My old AM logic s812 based box worked perfectly, with AFR and all features working. Seems like getting 3 GB version of S912 was epic fail no proper AFR, color issues, unstable firmwares

[jit18]

6) I recomend to connect 12V PSU before flashing to be sure that device will have enough power (without 13v connected flashing fails sometimes)

Dude what are you talking about...

DON'T TRY THIS, YOU WILL FRY YOUR BOX!

Sometimes you can access the box in maskrom mode if you find the right pins to short, look here:

http://freaktab.com/forum/main-categ...short-location

But putting 12v on the box will definitely fry it...

[RISCy Dude]

Agreed, ZRas' post has been edited to show 5V.

Thanks for pointing out the error.

[ZRas]

Oh my god...
Sorry! my bad! You are right!
Thanks for fixing, i hope no one tried it.

[RISCy Dude]

Hello ZRas, Welcome to Freaktab.
An easy mistake to make.
No worries.

[Teddybee]

Superceleron, the T95UPRO K and Z have new android 7.1 roms. Could you make a suberb version of it as well?
https://chinagadgetsreviews.com/down...us-tv-box.html
https://chinagadgetsreviews.com/down...-tv-box-3.html
https://chinagadgetsreviews.com/download-android-nougat-7-1-firmware-wechip-t95k-pro-tv-box-2.html

[victorsyt]

Hi friends, which application is responsible for display(LED) on the device (T95Z Plus)?

[Teddybee]

Hi friends, which application is responsible for display(LED) on the device (T95Z Plus)?

It is in the android kernel.

[victorsyt]

It is in the android kernel.

Thanks

[lammer]

Does it worked for 3g/16g version?
Sorry for my chinese english!

[rGlory]

I got this box https://www.amazon.com/dp/B071P56CQC..._prd_ttl_sol_0 which had Androind 7 on it originally. Unfortunately stock firmware is buggy - first of all Google Play resets itself every time. But that is not the main problem - some HD video playing on kodi with hardware acceleration has artifacts. Disabling hardware acceleration makes it play fine but box hangs after around an hour of playing. Flashing this firmware fixes the video problem but it has issues with network - wifi does not work at all, ethernet works only if you plug it to 100Mb switch. If you plug to 1Gb it is not working anymore (DHCP is not detected, static config does not work either, though switch shows that device is connected propely). Flashing this firmware Sunvell 1027-T95ZPLUS-4335&6330-v6 makes WIFI work again (did not test completely, but at least it sees networks again), but still has the same issue with 1Gb. I am not sure if wifi/ethernet drivers from Android 7 can be ported to this firmware, that would be great and would make this firmware perfect for me. I am going to stay with Sunvell one for now until they fix hardware acceleration on Android 7 or this firmware would pickup drivers. Cheers

[cdzo72]

Any plans on updating to Android 7?

[cdzo72]

I just installed this ROM on my T95Z that came with Android 7.1 from the factory. Everything but the ethernet seems to be working fine but I did notice something no one has mentioned... the ethernet icon IS visible in the LED front screen but as others have observed I don't have any connection using ethernet even trying to punch in static IP settings.

[Bekko]

Hello,

I have the sunvell T95z plus 3gb/32gb.
Does this Rom work on it or where can I find a custom rom for it?

[rumunn95]

It's any chance to work witch LTM 8830 chip ? How implement drivers to kernel to work with? Or external usb bluetooth work. I use sixaxis pad and i want to use with this rom.
Sory, my english is poor.

Wysłane z mojego LG-D802 przy użyciu Tapatalka

[minoltista]

Hi all', Sorry for the question: does anyone share me a link how to download this firmware? I have stock version.
Thank you.
M

Inviato dal mio Redmi Note 3 utilizzando Tapatalk