[ROM] Z4 RK3368 - android TV (ATV) for Andoer Z4 - ENY EKB368 - Acemax AK838 - Tronfy X6

[Bestmodel03]

Hi I have Himedia h8 box with rk3368 android 5.1
Can i flash this rom on my device?

[mani man]

Hi Ben that firmware link did not work are there any others that may work?

[brickmojoccatz]

Am i only one not being able to install LuckPatcher, error message is app not installed. Sorry if this subject is not allowed and please remove.

[Billy141]

Guna give it ago on my csa90 aka nexbox n8 I'll let you know how it goes

[brickmojoccatz]

Solved it by installing a APK editor and resigning the apk, thanks to the pointer by Billy141

[Bazmamfoo]

didnt realise there was an ATV ROM available fo rthese boxes! Time to pull it out of storage and dust it off!

[Bazmamfoo]

Just installed this ROM, and I'm so surprised that it actually runs on this old box!

anyone managed to get sound working with this ROM on the Tronsmart R68? Also, I'm finding internet speeds very slow over WiFi?

[Bazmamfoo]

RK3368 Kernel & Kernel Resource Files for my V2.5 BRE ROM

To support more RK3368 hardware like WiFi/BT, LAN chips and IR Remote Control


Flash resource & kernel files with AndroidTool v2.3x or TWRP Recovery (already included to my V2.5 BRE ROM)

IMPORTANT: You always have 1st to flash my full ROM, than just update/flash the resource or kernel files.


(resource)

All resource files are with the same TURBO BOOST 1600 speed setting.

KRS Resource Image File	Supported[WiFi/BT]	Supported Devices
KRS_1.2.9a_AP6330_resource.img	AP6330	CSA90 (?), ...	please test an report
KRS_1.2.9b_AP6335_resource.img	AP6335	Z4 RK3368, Trosmart Rk3368 Meta, Zidoo x6 pro, Ugoos ut4 (?), ...	please test an report
KRS_1.2.9c_RTL8723bs_resource.img	RTL8723bs	Z4L (?), ...	please test an report

(?) = until now no test report available

Additional Note: KRS 1.2.9b is the same as KRS 1.2.8 that is already included to my V2.5 BRE ROM.
KRS 1.2.9b has onlyone change. It supports 2 more IR Remote from devices other than the Z4.
So there is no need to flash this version to your Z4. Its only to support more IR Remote Control of other boxes.



(kernel)

The following RK3368 3.10.0 Kernel are all tested with my ROM V2.5 BRE on my Z4.
Rom Starts and the have all nearly the same speed with my ROM V2.5 BRE.
Kernels with AP63xx & RTL8xxx support several WiFi/BT chips.

Kernel Image File	Kernel Info
Z4_AP63xx_RTL8xxx_kernel.img	qiachy #22 - 30.03.2016
CSA90_AP63xx_RTL8xxx_kernel.img	yangfeihu #60 - 12.09.2015
Z4L_AP63xx_RTL8xxx_kernel.img	yangfeihu #28 - 21.11.2015
ugoos_ut4_kernel.img	serega #15 - 13.10.2016
zidoo_x6pro_kernel.img	xiaoweihua #12 - 17.02.2016

Kernel file Z4_AP63xx_RTL8xxx_kernel.img is already included to my V2.5 BRE ROM


Feel free to mix up those files, to get the best hardware support for your device.

Z4 = Z4_AP63xx_RTL8xxx_kernel.img & KRS_1.2.9b_AP6335_resource.img


Test example for a RK3368 box with AP6330

1. Flash only KRS_1.2.9a_AP6330_resource.img
2. Flash KRS_1.2.9a_AP6330_resource.img & CSA90_AP63xx_RTL8xxx_kernel.img
3. Flash KRS_1.2.9a_AP6330_resource.img & Z4L_AP63xx_RTL8xxx_kernel.img

Test example for a RK3368 box with RTL8723bs

1. Flash only KRS_1.2.9c_RTL8723bs_resource.img
2. Flash KRS_1.2.9c_RTL8723bs_resource.img & CSA90_AP63xx_RTL8xxx_kernel.img
3. Flash KRS_1.2.9c_RTL8723bs_resource.img & Z4L_AP63xx_RTL8xxx_kernel.img

---

IR Remote Control Keylayout files

In case some or all keys of your IR Remote Controller doesn't work, you should check the following!

To enable the stock keybord layout file for your IR Remote Control, just copy the file "ff680030_pwm.kl" (see download) of your box to the folder "/system/usr/keylayout/" and overright the existing one. Reboot the box and enjoy the new keylayout file setting.

Important:

• Do not forget to chmod 0660 the file "ff680030_pwm.kl"
• Or use ES File Explorer (RootExplorer) to do so: Mark file (long press) >> More >> Properties >> Permissons [Change]
  and set it to >> rw- r- r- = (Read: Owner, Group, Other | Write: Owner)

Check also this thread to redefine any Keyboard, Gamepad, Remote Control to your own needs.

---

Best Practice Example

Box/Device	Files to use	tested & confirmed
Z4 RK3368 box	Z4_RK3368-android_TV(ATV)-by_cOOLio-V2.5_BRE.img	YES
Zidoo X6 Pro	Z4_RK3368-android_TV(ATV)-by_cOOLio-V2.5_BRE.img Zidoo keybord layout file (ff680030_pwm.kl)	YES
Trosmart Rk3368 Meta	Z4_RK3368-android_TV(ATV)-by_cOOLio-V2.5_BRE.img Tronsmart keybord layout file (ff680030_pwm.kl)	YES
Ugoos UT4	Z4_RK3368-android_TV(ATV)-by_cOOLio-V2.5_BRE.img ugoos_ut4_kernel.img Ugoos keybord layout file (ff680030_pwm.kl)	not yet
Z4L RK3368	Z4_RK3368-android_TV(ATV)-by_cOOLio-V2.5_BRE.img KRS_1.2.9c_RTL8723bs_resource.img	not yet

---

Please be so kind and post your test result, even if it is not working!
This will help all others, not me. Thanks


KRS Resource, Kernel & Keylayout: Download

---

@minixfreak

Thats the best I could give to support your RK3368 AP6330 box. Now it is up to you to test. Much luck!
And please give feedback.



@dincis1
I found some time to finish up some things I was already working on.
To solve your Mele F10 Pro remote. audio issue please flash KRS_1.2.9b_AP6335_resource.img & ugoos_ut4_kernel.img
Ive tested it with my Skype USB headset. Works perfect to me. Except the stock IR Remote. But you mentioned it already.

Much fun

Hey Coolio, great work on this ROM. I see you managed to resolve the audio issues with the Mele controller. I use the Minix Neo A2 remote and have the same proble, audio routing through the remote only, even when I change the settings. I tried flashing the fix for the Mele but having the same issues. Any ideas?

[Bazmamfoo]

Does this remove HDMI CEC? Can't find it in settings. Thanks

[Vega78]

Hello everybody. 10x for your greater firmware for TVboxes !!!
please help me with problem after flashing my Tronsmart R68G to "Android TV" 5Ghz wifi cant see, please take advise what i doing wrong ?

[mo123]

Hello everybody. 10x for your greater firmware for TVboxes !!!
please help me with problem after flashing my Tronsmart R68G to "Android TV" 5Ghz wifi cant see, please take advise what i doing wrong ?

Firmware doesn't support 5Ghz correctly.
Try a lower channel on your router you set manually, maybe you have some luck.
Tronsmart closed their tv box business months ago, hope it isn't one you bought recently.

[Vega78]

Firmware doesn't support 5Ghz correctly.
Try a lower channel on your router you set manually, maybe you have some luck.
Tronsmart closed their tv box business months ago, hope it isn't one you bought recently.

thank you.

[gefattern]

Hi ,

any chance to see this Rom with MM , Ugoos released , everbody knows a MM for RK3368 ,

will be interesting .

greetings / gefattern

[mo123]

Hi ,

any chance to see this Rom with MM , Ugoos released , everbody knows a MM for RK3368 ,

will be interesting .

greetings / gefattern

The Ugoos MM ROM has a problem with Youtube stuttering and also after a while device becomes slower, 30-35k Antutu score while it should be 45k+ score if working normally.

[manvel]

The Ugoos MM ROM has a problem with Youtube stuttering and also after a while device becomes slower, 30-35k Antutu score while it should be 45k+ score if working normally.

OK, but RK3368 devices (in particular Z4 and similar) are still devices with not so bad hardware and low prices (sometimes during sales). And to use it with 5.1 android is a little bit uninteresting nowadays when even 8 android is ready for tv-boxes. So may be you can recommend some other MM roms for Z4? Or at least we need MM (not 5.1) resource and kernels to combine with roms from other devices.??