[ROM] Z4 RK3368 - android TV (ATV) for Andoer Z4 - ENY EKB368 - Acemax AK838 - Tronfy X6

[cOOLio]

And my TURBO BOOST 1600 technique is comparable with the Turbo Boost Intel use for its Core i5 & Core i7 CPUs. So you can't use the boost all the time. Only that long until the CPU reach its critical temperature. Then the boost will turned automatically off, to normal speed, to protect the CPU from overheating. So this boost speed up all normal conditions a lot, but not in longterm runs with maximum CPU load of 100%. In those conditions the CPU has the same speed as without my TURBO BOOST 1600.

Shomari tried to use a full time boost, while he disabled all temperature checks of the CPU. So his T8C technique is definitely faster than mine, but in my test it was also not stable at all. Becasue it crashes all the time, within seconds, when I made stress CPU test with 100% CPU load. That's why I tried somthing else, more stable, but also a bit slower then Shomari T8C.

[jit18]

Do you have a link to the box you are using?

Check the cooler, change it if possible... I think your problems are overheating of the soc... So it crashes...
(Shomari method)

[cOOLio]

And Shomari had always, at least, 4k more in AnTuTu when we both use the same ROM. My theory to this different results is, it depends always on the cooling capebilitys of your CPU cooler. Mine seems to be one of the bad ones. Maybe the passive cooler was bad clued to the CPU during production process?

[cOOLio]

My Z4 is a Andoer Z4 and the CPU temperature in idle is mostly already at 60 °C.
Check with my Kodi 7.x temperature fix.

[jit18]

Well, what can i say...

Pictures speak for them self

[cOOLio]

And this is my Z4 from the inside with all its details...

[jit18]

Now i am curious, send me a link of the Z4 Rom that has only 26K antutu score on your box...
I will try this out..

[cOOLio]

Well, what can i say...

Pictures speak for them self

How did you get the passive cooler away from the cpu? I tried it already with heating the cooler with a professinal hairdryer of my wive. The I tried to cut the clued cooler with floss from the cpu. No luck at all.

[cOOLio]

Now i am curious, send me a link of the Z4 Rom that has only 26K antutu score on your box...
I will try this out..

That was the stock one the box came with. Don't know which version it was. But i used that shitty ROM for more than a half year, until I found yabalars ROM.

[jit18]

You need a little more than a floss..

I used a cutter like this

http://www.fiskars.co.nz/var/fiskars_emea/storage/images/frontpage2/school-office/products/cutters/2680596-1-eng-EU/Cutters.png

Just to be clear, it's a ******* pain in the ass but its possible..

[cOOLio]

You need a little more than a floss..

I used a cutter like this

http://www.fiskars.co.nz/var/fiskars_emea/storage/images/frontpage2/school-office/products/cutters/2680596-1-eng-EU/Cutters.png

Just to be clear, it's a ******* pain in the ass but its possible..

Ok I see. Did you heat up or cool down the passive cooler, to change the durability state of the clue?
And what kind of cooler (size) do you use right now? Because there is no much space inside of the box.
Because of this heat collecting metal plate. Or did you remove the silver metal plate?

[koes]

And this is my Z4 from the inside with all its details...

yuntab z4 is a little bit different. No foresee emc and no samsung ram. Mine have samsung KLMAG4FE4B-B002 emc and hynix H5TC4G63AFR ram.
Maybe because I have xt-z4-v12 (20160222) version.
And antutu in stock rom was 36000 too so no improvements and maybe atv seems slower than stock launcher.
I'm using antutu 6.3.3 and antutu 3d 6.1

[jit18]

Ok I see. Did you heat up or cool down the passive cooler, to change the durability state of the clue?
And what kind of cooler (size) do you use right now? Because there is no much space inside of the box.
Because of this heat collecting metal plate. Or did you remove the silver metal plate?

No, i didn't heat up the cooler.. May be it's easier then, i don't know, just try it out... Worst case you buy another box

I used a chipset cooler from an old Motherboard (Elitegroup).
You must remove the screw above the cooler on the heat collecting metal plate.

It needs a little testing with the hight of the cooler, its very important to have a good contact with the metal plate (i used a thermal paste).

[cOOLio]

yuntab z4 is a little bit different. No foresee emc and no samsung ram. Mine have samsung KLMAG4FE4B-B002 emc and hynix H5TC4G63AFR ram.
Maybe because I have xt-z4-v12 (20160222) version.
And antutu in stock rom was 36000 too so no improvements and maybe atv seems slower than stock launcher.
I'm using antutu 6.3.3 and antutu 3d 6.1

Can you please check also the speed of your eMMC and RAM with A1 SD Bench.

These are my results for the accurate test with reboot. The default test ends for me always in a cache (RAM) hit. So the result of the default test without a reboot is always wrong.


Internal memory (eMMC)
Read 85.33MB/s - Write 19.25 MB/s

RAM
RAM copy 2832.40 MB/s




To activate a comparable test you must long press on "Internal memory" then select "Accurate - with reboot"
Then start part 1 of the test (write), reboot the box and start a1 SD bench again to start part 2 (read).

[cOOLio]

No, i didn't heat up the cooler.. May be it's easier then, i don't know, just try it out... Worst case you buy another box

I used a chipset cooler from an old Motherboard (Elitegroup).
You must remove the screw above the cooler on the heat collecting metal plate.

It needs a little testing with the hight of the cooler, its very important to have a good contact with the metal plate (i used a thermal paste).

So you use the metal plate as cooling extension with direct contact to the passive cooler. Clever!