Rom: Android Pie for S912

[bumerc]

Massimo1993

u-boot@ddr4_timing_update_v3_board.tar.xz

[Massimo1993]

Massimo1993

u-boot@ddr4_timing_update_v3_board.tar.xz

Unfortunately not working [0x10105004]Romcode/Initialize DDR/Read initialize status/Error result
Before giving error it stayed longer at 2% compared to the first build you made.

I did install the SHMOD firmware that has stock bootloader for ddr4 v3 version of h96 pro+
here is the log https://pastebin.com/Rn6GRnPL
hope this could help.
Thanks again for your help and time, i really appreciate.

[bumerc]

...
I did install the SHMOD firmware that has stock bootloader for ddr4 v3 version of h96 pro+
here is the log https://pastebin.com/Rn6GRnPL
hope this could help.
Thanks again for your help and time, i really appreciate.

u-boot@ddr4_792mhz.tar.xz

[Massimo1993]

u-boot@ddr4_792mhz.tar.xz

[0x10105002]Romcode/Initialize DDR/Read initialize status/USB Control setup error
the same error as the first one and the error it gave me was instant at 2%, no loading.
Maybe the timing on u-boot@ddr4_timing_update_v3_board.tar.xz was right and that's why it did halt for few seconds at 2% before failing for another unknown reason.
I did use the amlogic tools 4.0 to extract and rebuild the image.

EDIT: i tried again the last 792mhz version with celereon instead of daviedpda firmware but this time was strange it gave me an error few times and then it started to flash but it stopped at around 70-80% with

[21:39:29 594][HUB2-1][Err]--failed:Verify Failed with sha1sum, origin sum "824ccc63ea00322766feee53434a10571d2a1ef7" != gen sum "6edf912a08f97b4cfcecbeb8a9f0acd6d4f49180"
[21:39:29 597][HUB2-1][Err]--[0x30405004]UBOOT/Partition system/Verify patition/Error result

[bumerc]

The timing is OK, it has not worked better since the last bl2 update. Did you replace all 4 files?

edit: Wait, the 792mhz version works, you just have sha1sum errors, repack the IMG again

[Massimo1993]

The timing is OK, it has not worked better since the last bl2 update. Did you replace all 4 files?

Yes i even did a bat file to rename them

RENAME u-boot.bin bootloader.PARTITION
RENAME u-boot.bin.sd.bin aml_sdc_burn.UBOOT
RENAME u-boot.bin.usb.tpl UBOOT.USB
RENAME u-boot.bin.usb.bl2 DDR.USB

edit: Wait, the 792mhz version works, you just have sha1sum errors, repack the IMG again

Did again even with davietPDA rom but still same problem except with davietpda rom i get 15 errors at 2% instead of just 5 and then started flashing but stopped at 90% with sha error.

[Massimo1993]

bumerc tried again with supercelereon firmware and except a small error at 2% it flashed and booted with apparently no problem, i've used an older version to repack it.
I will need to resolve the input problem and then i will test it to check if there will be any freeze/reboot.
Again, thanks a lot you did an amazing job.

[Vitalijuakm]

Can there be firmware on VIM2_Pie_V200624 with x64 root fix and sd fix android 9 for writing to hdd with all rights?

[ppromo47]

Can there be firmware on VIM2_Pie_V200624 with x64 root fix and sd fix android 9 for writing to hdd with all rights?

Its already x64 and rooted, what is your question again?

[ppromo47]

Is there a way to get bottom navigation and status bar enabled?
Also access settings in full screen, like in phone.

[Vitalijuakm]

I want the stock version VIM2_Pie_V200624 standard it x32 I want x64 and that was not an ATV
I can provide access to the PC for RAM 32GB cpu 2670 VirtualBox AnyDesk TeamViewer

[Vitalijuakm]

Is there a way to get bottom navigation and status bar enabled?
Also access settings in full screen, like in phone.

I want the stock version VIM2_Pie_V200624 standard it x32 I want x64 and that was not an ATV
I can provide access to the PC for RAM 32GB cpu 2670 VirtualBox AnyDesk TeamViewer

[Massimo1993]

bumerc tested but still same problem, it freezes and then it will reboot. I think there are no easy way to fix this, too bad.
Thanks again for helping.

[bumerc]

Massimo1993
Very little information and no log. Are full 3GB RAM recognized? Install CoreElec on the SDcard and test it

[ReaperMan]

sergej_a_g
Port of Android 9 ATV By SLIMBOX ver 5.1 ATV & AOSP


Wi-Fi, bluetooth,
remote control (does not include the console)
Lan 1000
Nav Bars,
root, script support.
Doesn't work: Playback settings, screen size.
Checked on MECOOL BB2 PRO 3/16.

ATV
Port_Android_9_ATV_32_Slimbox_to_BB2Pro_3_16_1000_ by_sergej_a_g.7z

https://yadi.sk/d/Oi_gX40053pRcQ

~ Maikl ~ Update? LPDDR3_Port_Android_9_ATV_32.img

https://yadi.sk/d/5meB43uz25lOXQ

AOSP

Port_Android_9_AOSP_32_Slimbox_to_BB2Pro_3_16_1000 _ by_sergej_a_g.7z 1.17G

https://yadi.sk/d/j48wIHbmNEW8CA

~ Maikl ~ Update? LPDDR3_Port_Android_9_AOSP_32.img 1.18G
https://yadi.sk/d/DHba_nZckwJjPQ

******
Tested AOSP on H96 Pro+ LPDDR3

AOSP and ATV launchers
Wi-Fi 2.4g
Bluetooth(?),
remote control (does not include the console)
Lan 1000(?)
Nav Bars,
root/unroot, Initd script support.
Viper4android FX(?)
Screensaver
Titanium Backup write to external HD

No Google Play.

Doesn't work:
Playback settings(?)
Screen size(?)
Wifi 5g
Wifi has shutdown-once(reboot required)
File Transfer rate...max 4.5 MB/s


Still testing...seems nice so far.
Slow internal to SD file transfer!!!! 600KB - 2400KBs
Attaching USB HD not always seen.
Wake from screen saver may infrequently result in fuzzy text. Choose screen resolution again to restore.
Setting up AdGuard HTTPS, require screen lock pin code does not work.

P.S. Tried Customization Tool rebuild For Sc-Pie(error 7%) reloaded this AOSP and successful flash.