Binary patched kernels for Pipo models

[X-Ray]

you need an updated script to be used on kitkat

PLZ can you tell me where can i download this new script, or upload one of yours.
BTW i mod the kernel from RR.1.8 with my script and it works...i think its a KK kernel too.

greetings from germany
Ray

[giouncino]

PLZ can you tell me where can i download this new script, or upload one of yours.
BTW i mod the kernel from RR.1.8 with my script and it works...i think its a KK kernel too.

greetings from germany
Ray

No, the kernel included with RR 1.8 is based on old source files, that's the reason why with the older script you are able to mod it.
overclockomatic_kk2.zip

[X-Ray]

Ah ok .THX for information and help.
Ray

[psxmail]

Pipo doesn't boot

Hi,

last week I installed kernel_GPS_1.3_cpu1704h_target_2.1_gpu600_ddr744 to my Pipo M6PRO in Kikat RilleyRom. Every thing worked fine.

But yesterday as every evening I have power off my pipo normaly.
And this morning, it stay in the boot animantion for a long time..
I tried to remove the sd card but it's quite the same thing.

What can I do, fash the misc.img ? or new Kernel, reset ?
Maybe wipe de davik cache, but how I can go into the recovery mode ?

Thank for help.

[giouncino]

Hi,

last week I installed kernel_GPS_1.3_cpu1704h_target_2.1_gpu600_ddr744 to my Pipo M6PRO in Kikat RilleyRom. Every thing worked fine.

But yesterday as every evening I have power off my pipo normaly.
And this morning, it stay in the boot animantion for a long time..
I tried to remove the sd card but it's quite the same thing.

What can I do, fash the misc.img ? or new Kernel, reset ?
Maybe wipe de davik cache, but how I can go into the recovery mode ?

Thank for help.

Very strange...
Try the reset pinhole.
If it doesn't help try flashing another "less demanding" kernel (like kernel_GPS_1.3_cpu1704h_1325mV)

[psxmail]

Very strange...
Try the reset pinhole.
If it doesn't help try flashing another "less demanding" kernel (like kernel_GPS_1.3_cpu1704h_1325mV)

Hi,

It try this two action, and nothing changed :'(

the tablette still in a boot-loop.

I have to reflash the rom ? if yes, same step as flash kernel, poweroff and old power and vol+ ?

but I don't have to take the bootloader this time ?

thank

[giouncino]

Hi,

It try this two action, and nothing changed :'(

the tablette still in a boot-loop.

I have to reflash the rom ? if yes, same step as flash kernel, poweroff and old power and vol+ ?

but I don't have to take the bootloader this time ?

thank

If the step above didn't solve your problem is not a matter of my modded kernel (not a good news for you because you need to flash the entire ROM!).

To flash the whole rome again use the same behaviour as per the kernel only but:
1 - deselect the loader (if you flash KK over KK)
2 - press "erase IDB" before flashing.

the other steps are the same

[psxmail]

Re : Binary patched kernels for Pipo models

If the step above didn't solve your problem is not a matter of my modded kernel (not a good news for you because you need to flash the entire ROM!).

To flash the whole rome again use the same behaviour as per the kernel only but:
1 - deselect the loader (if you flash KK over KK)
2 - press "erase IDB" before flashing.

the other steps are the same

This worked fine for me. I use second kernel to test.
Thanks 

Envoyé de mon M6Pro en utilisant Tapatalk

[giouncino]

M6pro Kernels for KITKAT 1.8 generated from new sources (issue 1.4)

Here in the following are new kernels for PIPO M6pro and RileyROM 1.8 (or Kitkat stock ROM dated february 13rd or february 20) generated from new source files (again many thanks to user maakie that prepared the original kernel from I generated these mods),
This new issue improves, as maakie says:


* Battery indication when charged from off condition
* other minor changes


The Kernels with the "V1" indication have the new lowest frequency set to 216Mhz to save battery (all new kernels except "CPU_STOCK")

NOTE: To achieve the best performance it is better to set OFF the developers options.
To do this:
go on Settings -> development options (slide to OFF).


Here are the files:

https://www.dropbox.com/s/n5qlfxdxymvmrvb/kernel_GPS_1.4_cpu_stock_gpu600_ddr648.zip

https://www.dropbox.com/s/4wfjahf5ji62dhv/kernel_GPS_1.4_cpu_stock_gpu600_ddr672.zip

https://www.dropbox.com/s/fy0vf1wcimgn9wk/kernel_GPS_1.4_cpu_stock_gpu600_ddr744.zip

https://www.dropbox.com/s/g8qjxqb4giwhnws/kernel_GPS_1.4_cpu_stock_gpu600_ddr768.zip

https://www.dropbox.com/s/8ypewrqgzafngg8/kernel_GPS_1.4_cpu1704h_825_users_V1_gpu600_ddr648.zip

https://www.dropbox.com/s/c6f9zpnlqkz0c6s/kernel_GPS_1.4_cpu1704h_825_users_V1_gpu600_ddr672.zip

https://www.dropbox.com/s/ampv5t551gfmqn4/kernel_GPS_1.4_cpu1704h_825_users_V1_gpu600_ddr744.zip

https://www.dropbox.com/s/9kj1c9nb8vz74u4/kernel_GPS_1.4_cpu1704h_825_users_V1_gpu600_ddr768.zip

https://www.dropbox.com/s/fjlao9ii3zepzhg/kernel_GPS_1.4_cpu1704h_1325mV_V1_gpu600_ddr648.zip

https://www.dropbox.com/s/wamfd5tmsmf31lm/kernel_GPS_1.4_cpu1704h_1325mV_V1_gpu600_ddr672.zip

https://www.dropbox.com/s/v8trrphfqgxk5h6/kernel_GPS_1.4_cpu1704h_1325mV_V1_gpu600_ddr744.zip

https://www.dropbox.com/s/a19m1ohig6apvpw/kernel_GPS_1.4_cpu1704h_1325mV_V1_gpu600_ddr768.zip

https://www.dropbox.com/s/3td1ozb0yeza4am/kernel_GPS_1.4_cpu1704h_target_2.1_V1_gpu600_ddr648.zip

https://www.dropbox.com/s/qh6r8g98pr8kuxd/kernel_GPS_1.4_cpu1704h_target_2.1_V1_gpu600_ddr672.zip

https://www.dropbox.com/s/z8u0sh76k68jbou/kernel_GPS_1.4_cpu1704h_target_2.1_V1_gpu600_ddr744.zip

https://www.dropbox.com/s/bzhpaanuynzu4ia/kernel_GPS_1.4_cpu1704h_target_2.1_V1_gpu600_ddr768.zip

https://www.dropbox.com/s/4fg8ccc1q2h4vxo/kernel_GPS_1.4_cpu1704h_VERY_LOW_V1_gpu600_ddr648.zip

https://www.dropbox.com/s/a2fazn1dm36pd0r/kernel_GPS_1.4_cpu1704h_VERY_LOW_V1_gpu600_ddr672.zip

https://www.dropbox.com/s/3bv63c3adxkawsn/kernel_GPS_1.4_cpu1704h_VERY_LOW_V1_gpu600_ddr744.zip

https://www.dropbox.com/s/o99zo20dkuonw2t/kernel_GPS_1.4_cpu1704h_VERY_LOW_V1_gpu600_ddr768.zip

Here is the stock libril to be used with these kernels:
https://www.dropbox.com/s/ti64s17ahsgbkph/libril-rk29-dataonly.so
This libril file shall be copied into: /system/lib overwriting the previous file.




HOW TO INSTALL KERNEL:


1 - Extract the kernel...img you want to flash from the zip file
2 - connect the tablet (In OFF state, NOT STAND-BY) to the PC via USB cable
3 - Open riley Flash tool
4 - DESELECT all settings EXCEPT KERNEL.IMG
5 - Click on the column "..." of the flash tool at the height of the kernel.img, browse and select the correct kernel...img file extracted from the zip
6 - Press simultaneously power AND volume + of the tablet until the flash tool detects your tablet
7 - Press "Flash Rom" (DO NOT ERASE IDB)


The process is really fast, when it's complete the tablet automatically reboots. Now you can disconnect the tablet from USB and enjoy better performace and longer battery duration!


NOTE: if the kernel is not stable for your tablet you can try another one. Pay attention that the general rule for stability is:


ABOUT CPU:


CPU STOCK (STABLE FOR EVERY TABLET)
cpu1704h_1325mV (GENERALLY STABLE)
cpu1704h_target_2.1 (STABLE FOR SOME TABLETS)
cpu1704h_825_users (STABLE FOR SOME TABLETS)
cpu1704h_VERY_LOW (STABLE FOR FEW AND LUCKY OWNERS)


ABOUT RAM:
ddr648 (MOST STABLE)
ddr672 (GENERALLY STABLE)
ddr744 (GENERALLY STABLE)
ddr768 (STABLE FOR SOME TABLETS)


ABOUT Battery duration:
cpu1704h_825_users or cpu1704h_VERY_LOW and RAM ddr648, ddr672 or ddr744 will give you the best ombinations for battery saving.
Ram set to 744Mhz has the LOWEST voltage (1.2V). For me is totally stable.
Ram set to 648 and 672 are set to 1.3V (Stock, for best stability)
Ram set to 768 has the voltage set to 1.25V somewhere in the middle.

[jsager]

Re: Binary patched kernels for Pipo models

Here in the following are new kernels for PIPO M6pro and RileyROM 1.8 (or Kitkat stock ROM dated february 13rd or february 20) generated from new source files (again many thanks to user maakie that prepared the original kernel from I generated these mods)...

Many thanks. The maakie kernel has been incredibly stable for me. I haven't had to reboot once since I installed the last version modded by you. I have also found that I am able to use the overclocked versions. I look forward to trying these out.

The only thing that seems to be lacking for me is a strong WiFi signal. Even when I am a mere few feet away from my access points I get a poor signal. Can't remember if there is a way to increase the power on WiFi to perhaps obtain a stronger signal. Have you had this issue at all?

Thanks again to you both.

Sent from my Galaxy Nexus using Tapatalk

[psxmail]

Hi,

Just a question,

This libril file shall be copied into: /system/lib overwriting the previous file.

we have to copy and use it for every version of your kernel in order to have deep slpeep, that is ?

Thank

[giouncino]

Hi,

Just a question,

This libril file shall be copied into: /system/lib overwriting the previous file.

we have to copy and use it for every version of your kernel in order to have deep slpeep, that is ?

Thank

it enable deep sleep only on 1.3 and 1.4
This libril file is the ORIGINAL kitkat one.
The libril included in RileyROM 1.8 is and old JB not working properly one.

[psxmail]

it enable deep sleep only on 1.3 and 1.4
This libril file is the ORIGINAL kitkat one.
The libril included in RileyROM 1.8 is and old JB not working properly one.

Thanks for theses informations :-)

[annaepi]

Here in the following are new kernels for PIPO M6pro and RileyROM 1.8 (or Kitkat stock ROM dated february 13rd or february 20) generated from new source files (again many thanks to user maakie that prepared the original kernel from I generated these mods),
This new issue improves, as maakie says:


* Battery indication when charged from off condition
* other minor changes


The Kernels with the "V1" indication have the new lowest frequency set to 216Mhz to save battery (all new kernels except "CPU_STOCK")

NOTE: To achieve the best performance it is better to set OFF the developers options.
To do this:
go on Settings -> development options (slide to OFF).


Here are the files:

https://www.dropbox.com/s/n5qlfxdxymvmrvb/kernel_GPS_1.4_cpu_stock_gpu600_ddr648.zip

https://www.dropbox.com/s/4wfjahf5ji62dhv/kernel_GPS_1.4_cpu_stock_gpu600_ddr672.zip

https://www.dropbox.com/s/fy0vf1wcimgn9wk/kernel_GPS_1.4_cpu_stock_gpu600_ddr744.zip

https://www.dropbox.com/s/g8qjxqb4giwhnws/kernel_GPS_1.4_cpu_stock_gpu600_ddr768.zip

https://www.dropbox.com/s/8ypewrqgzafngg8/kernel_GPS_1.4_cpu1704h_825_users_V1_gpu600_ddr648.zip

https://www.dropbox.com/s/c6f9zpnlqkz0c6s/kernel_GPS_1.4_cpu1704h_825_users_V1_gpu600_ddr672.zip

https://www.dropbox.com/s/ampv5t551gfmqn4/kernel_GPS_1.4_cpu1704h_825_users_V1_gpu600_ddr744.zip

https://www.dropbox.com/s/9kj1c9nb8vz74u4/kernel_GPS_1.4_cpu1704h_825_users_V1_gpu600_ddr768.zip

https://www.dropbox.com/s/fjlao9ii3zepzhg/kernel_GPS_1.4_cpu1704h_1325mV_V1_gpu600_ddr648.zip

https://www.dropbox.com/s/wamfd5tmsmf31lm/kernel_GPS_1.4_cpu1704h_1325mV_V1_gpu600_ddr672.zip

https://www.dropbox.com/s/v8trrphfqgxk5h6/kernel_GPS_1.4_cpu1704h_1325mV_V1_gpu600_ddr744.zip

https://www.dropbox.com/s/a19m1ohig6apvpw/kernel_GPS_1.4_cpu1704h_1325mV_V1_gpu600_ddr768.zip

https://www.dropbox.com/s/3td1ozb0yeza4am/kernel_GPS_1.4_cpu1704h_target_2.1_V1_gpu600_ddr648.zip

https://www.dropbox.com/s/qh6r8g98pr8kuxd/kernel_GPS_1.4_cpu1704h_target_2.1_V1_gpu600_ddr672.zip

https://www.dropbox.com/s/z8u0sh76k68jbou/kernel_GPS_1.4_cpu1704h_target_2.1_V1_gpu600_ddr744.zip

https://www.dropbox.com/s/bzhpaanuynzu4ia/kernel_GPS_1.4_cpu1704h_target_2.1_V1_gpu600_ddr768.zip

https://www.dropbox.com/s/4fg8ccc1q2h4vxo/kernel_GPS_1.4_cpu1704h_VERY_LOW_V1_gpu600_ddr648.zip

https://www.dropbox.com/s/a2fazn1dm36pd0r/kernel_GPS_1.4_cpu1704h_VERY_LOW_V1_gpu600_ddr672.zip

https://www.dropbox.com/s/3bv63c3adxkawsn/kernel_GPS_1.4_cpu1704h_VERY_LOW_V1_gpu600_ddr744.zip

https://www.dropbox.com/s/o99zo20dkuonw2t/kernel_GPS_1.4_cpu1704h_VERY_LOW_V1_gpu600_ddr768.zip

Here is the stock libril to be used with these kernels:

https://www.dropbox.com/s/ti64s17ahs...29-dataonly.so

This libril file shall be copied into: /system/lib overwriting the previous file.




HOW TO INSTALL KERNEL:


1 - Extract the kernel...img you want to flash from the zip file
2 - connect the tablet (In OFF state, NOT STAND-BY) to the PC via USB cable
3 - Open riley Flash tool
4 - DESELECT all settings EXCEPT KERNEL.IMG
5 - Click on the column "..." of the flash tool at the height of the kernel.img, browse and select the correct kernel...img file extracted from the zip
6 - Press simultaneously power AND volume + of the tablet until the flash tool detects your tablet
7 - Press "Flash Rom" (DO NOT ERASE IDB)


The process is really fast, when it's complete the tablet automatically reboots. Now you can disconnect the tablet from USB and enjoy better performace and longer battery duration!


NOTE: if the kernel is not stable for your tablet you can try another one. Pay attention that the general rule for stability is:


ABOUT CPU:


CPU STOCK (STABLE FOR EVERY TABLET)
cpu1704h_1325mV (GENERALLY STABLE)
cpu1704h_target_2.1 (STABLE FOR SOME TABLETS)
cpu1704h_825_users (STABLE FOR SOME TABLETS)
cpu1704h_VERY_LOW (STABLE FOR FEW AND LUCKY OWNERS)


ABOUT RAM:
ddr648 (MOST STABLE)
ddr672 (GENERALLY STABLE)
ddr744 (GENERALLY STABLE)
ddr768 (STABLE FOR SOME TABLETS)


ABOUT Battery duration:
cpu1704h_825_users or cpu1704h_VERY_LOW and RAM ddr648, ddr672 or ddr744 will give you the best ombinations for battery saving.
Ram set to 744Mhz has the LOWEST voltage (1.2V). For me is totally stable.
Ram set to 648 and 672 are set to 1.3V (Stock, for best stability)
Ram set to 768 has the voltage set to 1.25V somewhere in the middle.

The file link libril is invalid ....

[giouncino]

The file link libril is invalid ....

Copy the link and paste in a new browser windows: it will work (tested)