NEOMODE HYBRID ROM 1.8 MK802IV UG007B CX-919 MK809III J22 and others with AP6210

[neomode]

AW: NEOMODE HYBRID ROM 1.8 MK802IV UG007B CX-919 MK809III J22 and others with AP6210

There are no stupid questions.
Only stupid answers
To Flash your device you connect it with the OTG port to your pc. This is the port near the SD card slot.

First Start the Flash Util on the PC
Second take a paperclip and stick in the hole on the side where the OTG port is and hold it.
Now connect the micro Usb cable.
The system should detect a new device.
After that erase idb than run

Neomode

Gesendet von meinem GT-I9305 mit Tapatalk 2

[Bertin]

Ecclestone, Neomode,

thanks a lot for your suggestions.

I'll proceed soon.

[ulises1954]

Neomode It's not my intention to pressure you much, But I want to know some Info about the current development of the Update?

Hi Neomode,

Although I am aware that you've had some setbacks in improving and correcting the errors of the last version 1.8, Please I want to know how things are going, if you are still having problems to finish the Update and if you will probably could upload within days or the next weekend?


As I have always said, it's not my intention to pressure you much, because I already know that you are working very hard with this ROM and also have had time problems...


I just wanted to know some information of the development of the update...

How are the tests in all the TV Sticks?


Thanks again for your hard work and for all your selfless help!

[babnik80]

Hi neomode.
i would like to ask you something.
As you wrote in the previous pages, you will make a new rom for the mk802iv.As you wait to receive a new stick.
I want to inform you, if you could find a solution, that with latest sn (as an example mine is 201309), overclocking the gpu is impossible. Using patchomatic tool says that all gone well, but when you make an antutu test the 3d score stays at about 2000 to 2100.
I would like to thank you for your hardwork in advance. And last but not least, is there any news for sdk 2.0 for our sticks,like minix done with x7?
Thanks again, hoping for your help.

[neomode]

AW: NEOMODE HYBRID ROM 1.8 MK802IV UG007B CX-919 MK809III J22 and others with AP6210

Thanks for your Information. Will Test it when I get my new MK802IV this week.
Hope that I can upload a new Version on weekend. An SDK 2 Rom we will see. I didn't think there is much difference between them.

Neomode

Gesendet von meinem GT-I9305 mit Tapatalk 2

[Chachotio]

Hi there... what is the last rom for cx-919? I see that you are working on one for mk809 but I cant see a link to downloas the one for cx-919.

Btw i cant use aallshare cast in my galaxy note 2 with my cx-919 properly, I see a pink screen mixing with the screen mirroring of the galaxy note 2 in the tv with neomode 1.7 ans finless rom.

does anybody know if there is a fix for this? Thanks in advance and thank you for all the effort you put on this neomode and rest

[woyoubenben]

good news for my stick！

[amclean123]

Hi there... what is the last rom for cx-919? I see that you are working on one for mk809 but I cant see a link to downloas the one for cx-919.

Btw i cant use aallshare cast in my galaxy note 2 with my cx-919 properly, I see a pink screen mixing with the screen mirroring of the galaxy note 2 in the tv with neomode 1.7 ans finless rom.

does anybody know if there is a fix for this? Thanks in advance and thank you for all the effort you put on this neomode and rest

The link is the same for mk809 and cx919. I've tried the 720 and 1080p. It works well.

[neomode]

AW: NEOMODE HYBRID ROM 1.8 MK802IV UG007B CX-919 MK809III J22 and others with AP6210

Hi neomode.
i would like to ask you something.
As you wrote in the previous pages, you will make a new rom for the mk802iv.As you wait to receive a new stick.
I want to inform you, if you could find a solution, that with latest sn (as an example mine is 201309), overclocking the gpu is impossible. Using patchomatic tool says that all gone well, but when you make an antutu test the 3d score stays at about 2000 to 2100.
I would like to thank you for your hardwork in advance. And last but not least, is there any news for sdk 2.0 for our sticks,like minix done with x7?
Thanks again, hoping for your help.

The problem is when you use a patched kernel and the standard Rom then the boot.img will overwrite the kernel.

When you use a custom Rom then it should work.

Neomode

Gesendet von meinem GT-I9305 mit Tapatalk 2

[Bertin]

The problem is when you use a patched kernel and the standard Rom then the boot.img will overwrite the kernel.

When you use a custom Rom then it should work.

Neomode

Gesendet von meinem GT-I9305 mit Tapatalk 2

I have an original untouched MK802IV with AP6120 sn 201309.
As I can understand, this is the canonical circumstance where the 1.8 ROM should have no problems just applying the installation kit prepared by Neomode, while problems arise diverting from this configuration.

Is it correct?

Thanks to everybody

[neomode]

AW: NEOMODE HYBRID ROM 1.8 MK802IV UG007B CX-919 MK809III J22 and others with AP6210

Yes that's correct. The MK802IV should have no Problems with it.

Also I get me a New MK802IV with AP6210 because me one get broken.
I want to say thank you to UsellIsell.com
For the good Discount in the Product.

Neomode

Gesendet von meinem GT-I9305 mit Tapatalk 2

[Bertin]

Yes that's correct. The MK802IV should have no Problems with it.

Also I get me a New MK802IV with AP6210 because me one get broken.
I want to say thank you to UsellIsell.com
For the good Discount in the Product.

Neomode

Gesendet von meinem GT-I9305 mit Tapatalk 2

Procedure is OK in writing data, but fails immediately in checking data.

Why?

[Bertin]

Procedure is OK in writing data, but fails immediately in checking data.

Why?

It seems like a problem in re-reading, as the procedure stops immediately after the end of the writing phase, when a temporary message informs that the writing action has performed without mistakes.
Considering that the writing phase itself has a control task byte per byte, it sounds strange that after the completion of the writing phase without problems immediately an error is revealed on the first byte of the re-readibg phase. Perhaps a bug in the procedure?
Take into account that before each run I performed the erase db, and the problem is identical on both 720p and 1020p versions.

[Bertin]

Sorry for the mistyping, 1080p version.

[SPM]

another interesting ROM

Hi

First, nice work neomode. I've been using your ROMs since i received my android stick (ug007b)

I tried this new version when 1.7 stated to get slow and WiFi was slow as well.
The new version has a few issues as we all know so I'm waiting for the update.
FYI, passthrough has never worked for me. When activated in SPMC, the sound was not working for DTS and 5.1.

I looked for another ROM and found an interesting one.
The site is all in German (but from what i could see, it shouldn't be an issue for neomode)
Rom can be found here:

http://www.arctablet.com/blog/forum/rockchip-rk3188-android-mini-pc/rom-rikomagic-rkm-mk802iv-model-based-on-ap6210-android-4-2-2-custom-root-1080p-firmware-20131107/

Before (1.7)
Wifi: DL: 0.64. UL:1.55
Antutu: black screen

This new ROM (BT working)
Wi-Fi: DL 12 UL 6.3
Antutu 15714

I'll be using it while you cook us a new ROM
Maybe it can help you for the issues encountered..

If anyone has an explanation for the issue i had with DTS and 5.1..