Rom: Android Pie for S912

[superceleron]

bumerc

Weird i can't see your posts... but if i go to you profile i can see them.

I do not agree with this and wrote about it already (this post was deleted). A very simple question, to which I still have not received an answer - why beelink itself did not fix and could not fix the timing error in BL33? (By the way, I also couldn’t do this, you couldn’t do it and none of the other experienced programmers could do it either)

I do not know why, i already asked my contacts at beelink to see if they can give me their "fix"... dont get your hopes up if they will do it...
Btw they did fix it.

[Massimo1993]

Btw Frank rom 3.3 (android 7.1.2) it's amazing for stability and settings on my h96 pro plus, hope he will make a port for h96 to help resolve this timing/compatibility problem.
Thanks again superceleron

[ppromo47]

The 792 installed ok, but stuck on google wheels boot, so i went back to 744 on gti ddr4, 3/32, qca9377.
Rom is working well, wifi fast, but no lan nor BT and unrooted and w/o twrp.
How can i install magisk or twrp? Any help, thanks

without root you cannot install recovery, try installing with SDCARD update.

[ppromo47]

bumerc

Weird i can't see your posts... but if i go to you profile i can see them.



I do not know why, i already asked my contacts at beelink to see if they can give me their "fix"... dont get your hopes up if they will do it...
Btw they did fix it.

waiting eagerly to try out the ROM, BTW your ROM will have the front LED clock working and the physical power button.

[larrywilson]

Android 9 https://mega.nz/file/vBJ2DIra#Vasily%20Shevchuk


Vasily Shevchuk rom

[minonano]

without root you cannot install recovery, try installing with SDCARD update.

Thanks was able to install magisk through SDCARD update, found a twrp zip file, then installed the magisk zip file. Now its rooted, but does the Twrp recovery image changes from ATV7 to ATV9?
I tried to use the older TWRPrecimage from ATV7, can no loger get to recovery. Will reinstall the rom again.

[superceleron]

here is a good output of a proper DDR4 s912 box below.
Beelink GT1 ultimates do has some hw flaw that they did some tricky stuff to the uboot... now what i really dunno they know the hw better than me, and i dont want to lose to many time on this chip since for me is a dead chip.

DDR4 chl: Rank0+1 @ 912MHz
bist_test rank: 0 13 04 22 2b 18 3e 0d 01 19 36 23 4a 16 06 27 2f 1a 44 1a 09 2c 2d 19 42 693 rank: 1 17 00 2f 2a 16 3f 13 00 27 37 23 4b 1a 04 31 2f 1a 44 1f 07 37 2d 19 41 693 - PASS

Rank0: 2048MB(auto)-2T-18

Rank1: 1024MB(auto)-2T-18

[ppromo47]

Thanks was able to install magisk through SDCARD update, found a twrp zip file, then installed the magisk zip file. Now its rooted, but does the Twrp recovery image changes from ATV7 to ATV9?
I tried to use the older TWRPrecimage from ATV7, can no loger get to recovery. Will reinstall the rom again.

I managed to create twrp recovery for this.
https://drive.google.com/file/d/1Ikh...D46Ope6bo/view try this

also how did you install magisk from sdcard? please can you list the steps.

[bumerc]

bumerc
I do not know why, i already asked my contacts at beelink to see if they can give me their "fix"... dont get your hopes up if they will do it...
Btw they did fix it.

I will only believe it when they show me the initialization log of BL2?
After which I will update my gt1 ultimate with this update and check it myself

[superceleron]

I will only believe it when they show me the initialization log of BL2?
After which I will update my gt1 ultimate with this update and check it myself

That one i posted above is from a S912 DDR4 3gb/32gb (one old box we used where i work for and ye is real 3gb since we where in is hw development )
But there is really something wrong with DDR of the GT1 ultimate for sure.

[superceleron]

Btw i did found a old 7.1 img for it, that someone from beelink gave me at the time(it has test-rom in the name), this is the log of it.

(jJsdio debug board detected
TE: 145410

BL2 Built : 11:58:42, May 27 2017.
gxl gc3c9a84 - xiaobo.gu@droid05

set vdd cpu_a to 1120 mv
set vdd cpu_b to 1050 mv
set vddee to 1000 mv
Board ID = 6
CPU clk: 1200MHz
DQS-corr enabled
DDR scramble enabled
DDR3 chl: Rank0+1 @ 912MHz - FAIL
DDR3 chl: Rank0 @ 912MHz - FAIL
DDR3 chl: Rank0 16bit @ 912MHz - FAIL
DDR4 chl: Rank0+1 @ 912MHz - PASS
Rank0: 2048MB(auto)-2T-18
Rank1: 1024MB(auto)-2T-18
DataBus test pass!
AddrBus test pass!
-s
Load fip header from eMMC, src: 0x0000c200, des: 0x01400000, size: 0x00004000
New fip structure!
Load bl30 from eMMC, src: 0x00010200, des: 0x01100000, size: 0x0000d600
Load bl31 from eMMC, src: 0x00020200, des: 0x05100000, size: 0x00018400
Load bl33 from eMMC, src: 0x0003c200, des: 0x01000000, size: 0x00064000
NOTICE: BL3-1: v1.0(release):3348978
NOTICE: BL3-1: Built : 15:44:01, May 12 2017
NOTICE: BL3-1: BL33 decompress pass
mpu_config_enable: ok
[Image: gxl_v1.1.3221-2cfba69 2017-05-27 16:03:58 qiufang.dai@droid07]
OPS=0x82
wdt: reset registers!
97 d2 5f 1d 50 c da 1e 23 59 ed 6 [0.677751 Inits done]
secure task start!
high task start!
low task start!
ERROR: Error initializing runtime service opteed_fast


U-Boot 2015.01-g2966aaa (Jul 12 2017 - 19:47:43)

DRAM: 3 GiB
Relocation Offset is: b6eb9000
register usb cfg[0][1] = 00000000b7f5cae8
[CANVAS]canvas init

[Massimo1993]

Android 9 https://mega.nz/file/vBJ2DIra#Vasily%20Shevchuk


Vasily Shevchuk rom

Not working on h96 pro plus ddr4 3/32, but it has a working remote controller.

[bumerc]

Btw i did found a old 7.1 img for it, that someone from beelink gave me at the time(it has test-rom in the name), this is the log of it.

(jJsdio debug board detected
TE: 145410

BL2 Built : 11:58:42, May 27 2017.
gxl gc3c9a84 - xiaobo.gu@droid05

set vdd cpu_a to 1120 mv
set vdd cpu_b to 1050 mv
set vddee to 1000 mv
Board ID = 6
CPU clk: 1200MHz
DQS-corr enabled
DDR scramble enabled
DDR3 chl: Rank0+1 @ 912MHz - FAIL
DDR3 chl: Rank0 @ 912MHz - FAIL
DDR3 chl: Rank0 16bit @ 912MHz - FAIL
DDR4 chl: Rank0+1 @ 912MHz - PASS
Rank0: 2048MB(auto)-2T-18
Rank1: 1024MB(auto)-2T-18
DataBus test pass!
AddrBus test pass!
-s
Load fip header from eMMC, src: 0x0000c200, des: 0x01400000, size: 0x00004000
New fip structure!
Load bl30 from eMMC, src: 0x00010200, des: 0x01100000, size: 0x0000d600
Load bl31 from eMMC, src: 0x00020200, des: 0x05100000, size: 0x00018400
Load bl33 from eMMC, src: 0x0003c200, des: 0x01000000, size: 0x00064000
NOTICE: BL3-1: v1.0(release):3348978
NOTICE: BL3-1: Built : 15:44:01, May 12 2017
NOTICE: BL3-1: BL33 decompress pass
mpu_config_enable: ok
[Image: gxl_v1.1.3221-2cfba69 2017-05-27 16:03:58 qiufang.dai@droid07]
OPS=0x82
wdt: reset registers!
97 d2 5f 1d 50 c da 1e 23 59 ed 6 [0.677751 Inits done]
secure task start!
high task start!
low task start!
ERROR: Error initializing runtime service opteed_fast


U-Boot 2015.01-g2966aaa (Jul 12 2017 - 19:47:43)

DRAM: 3 GiB
Relocation Offset is: b6eb9000
register usb cfg[0][1] = 00000000b7f5cae8
[CANVAS]canvas init

Thank you, this is the log of S/N B706XX....?

[superceleron]

Mine is the S/N: G912GS...

[bumerc]

here is a good output of a proper DDR4 s912 box below.
Beelink GT1 ultimates do has some hw flaw that they did some tricky stuff to the uboot... now what i really dunno they know the hw better than me, and i dont want to lose to many time on this chip since for me is a dead chip.

DDR4 chl: Rank0+1 @ 912MHz
bist_test rank: 0 13 04 22 2b 18 3e 0d 01 19 36 23 4a 16 06 27 2f 1a 44 1a 09 2c 2d 19 42 693 rank: 1 17 00 2f 2a 16 3f 13 00 27 37 23 4b 1a 04 31 2f 1a 44 1f 07 37 2d 19 41 693 - PASS

Rank0: 2048MB(auto)-2T-18

Rank1: 1024MB(auto)-2T-18

Here I absolutely agree with you

[superceleron]

i also had/have one with S/N: B706xx but i cant find it... is somewhere in the storage lol.