Kitkat Kernels for All (well most!)

[d33]

Version 3.1 for AP6210 has no working link?

AP6210

Fixed

[digger]

Hi d33,
My sincere congratulations
It is PERFECT that you have managed to overcome the full overclocking(CPU/DDR and GPU) of these crappy "T" chips eventually.
I have just flashed my K-R42 (3188T) with A928 Finless 2.0 KitKat and your AP6210 V3.0 HD kernel for testing.
It is GREAT
<4>[ 0.751073] efuse_version_val: efuse version = 51
<4>[ 0.751123] DVFS MSG: core: dvfs_adjust_table_lmtvolt get leakage_level = 6000
<4>[ 0.751193] adjust table freq=1800000 KHz, index=1375000 mV to index=1350000 mV
<4>[ 0.751266] efuse_version_val: efuse version = 51
<4>[ 0.751315] DVFS MSG: aclk_gpu: dvfs_adjust_table_lmtvolt get leakage_level = 6000
<6>[ 0.752245] D33Info: CPU is ROCKCHIP RK3188T
<6>[ 0.752293] D33Info: eFuses are set to (22) = 0x2b and (23) = 0x02

.
.
<6>[ 1.648028] ddrfreq: change freq to 720 MHz when normal

.
.
<4>[ 14.984700] Mali: mali freq table :Mali: 128,Mali: 198,Mali: 256,Mali: 297,Mali: 384,Mali: 594,Mali:

And AnTuTu:


It doesn't matter I don't have neither wifi nor Ethernet at the moment, but I'm happy to know we have a chance for our such problematic "T" devices.
Tried to utilize my 100mb Ethernet to USB adapter and watched big size MKV 25GB+ movie from the Internet.
It was very smooth and I didn't notice any CPU overheating.
I hope this your achievement will be shared with all Dev's here and we will have NEWEST KitKat ROMs for our different devices soon
Thank you very much again and GOOD LUCK!

[d33]

I hope this your achievement will be shared with all Dev's here and we will have NEWEST KitKat ROMs for our different devices soon

I've already pushed all changes to my public GIT repository, so it's shared with the world - including Rockchip!

[JDfense]

Can you test 3.10 please?

I got Kernel hd 3.10T barely to boot complete. Screen switches after some trials on and off while booting. After a complete boot screen flickers a bit, then it was over. It looks like a sharp full hd screen.
Before I reboot, I pulled a dmesg for you.

https://www.mediafire.com/?djvjm0q0cjkadbw

JDfense

[d33]

I got Kernel hd 3.10T barely to boot complete. Screen switches after some trials on and off while booting. After a complete boot screen flickers a bit, then it was over. It looks like a sharp full hd screen.
Before I reboot, I pulled a dmesg for you.

https://www.mediafire.com/?djvjm0q0cjkadbw

JDfense

It's only the last third of a DMESG, and not the interesting part. Sorry to hear that your device is still the only strange model.

DMESG via ADB may be an idea

Why it is so different to the rest is something I don't understand!

[ynot123]

MK802IV works well with 2.07 on HD T kernel and using boot1080_large.img . Seems it won't boot at all with V2.08 and higher. Am I missing something? I only flashed the kernel, is this OK or do I need to reflash all.

Ideas?

[d33]

MK802IV works well with 2.07 on HD T kernel and using boot1080_large.img . Seems it won't boot at all with V2.08 and higher. Am I missing something? I only flashed the kernel, is this OK or do I need to reflash all.

Ideas?

That should be okay. No idea why it isn't working for you?

[AccordXTC]

I don't understand what you want

Is there any point in v2.07 to 3.0 or same?

What I was asking is Measy RC13 has a mic and speaker in the keyboard used to work on JB, is that a kernel issue or rom issue.

[d33]

Is there any point in v2.07 to 3.0 or same? .

If you have a 'T' CPU then yes. DDR is fully unlocked and GPU is now unlocked.

If you have a TV Box then yes. RK1000 chip for Audio/TV out is supported

What I was asking is Measy RC13 has a mic and speaker in the keyboard used to work on JB, is that a kernel issue or rom issue.

If you provide the linux 2.6+ driver I'll compile it in for you.

[JDfense]

It's only the last third of a DMESG, and not the interesting part. Sorry to hear that your device is still the only strange model.

DMESG via ADB may be an idea

Why it is so different to the rest is something I don't understand!

Sorry the buffer was to small.

Not much hope for the cs968, but anyway here is the complete dmesg.

https://www.mediafire.com/?uok85gwtyj81a0i

JDfense

[d33]

Sorry the buffer was to small.

Not much hope for the cs968, but anyway here is the complete dmesg.

https://www.mediafire.com/?uok85gwtyj81a0i

JDfense

It looks fine except for the hub being disconnected/reconnected - power ?

[Max One]

D33, how can i change the Google TV logo in ur kernel?

[d33]

D33, how can i change the Google TV logo in ur kernel?

Just compile in an alternative

[JDfense]

Yes, I must always reconnect sdcard internal and external after rebooting. It is an old issue. I assume it comes with the power supply problem.
First otg for boot, then connecting regular power supply and the USB ports are working for keyboard mouse.

JDfense --->I8160

[AccordXTC]

If you provide the linux 2.6+ driver I'll compile it in for you.

Sorry d33 I don't have Linux drivers for this unit, never came with a disc. I've checked Measy website with no luck there either.