Kitkat Kernels for All (well most!)

[Benobi]

GPIO dump from stock: Thanks
DMESG debug11: Not needed - it is for flickering only

OK, so only GPIO dump from stock kernel (working WiFi and Bluetooth), right?

[d33]

OK, so only GPIO dump from stock kernel (working WiFi and Bluetooth), right?

Correct.

wifi on, bt on - GPIO DUMP 1
wifi off, bt on - GPIO DUMP 2
Wifi on, bt off - GPIO DUMP 3
Wifi off, bt off - GPIO DUMP 4

Then use the analysis stuff from the thread Leolas created

[ghanashyaml]

Can someone else with Mediatek help out?

I can test out tonight, with the "debug 11_oc", after I am back from office and after family chores .

Thanks to you and D33, it helps us all with these MTK devices!

I did test out the debug_10_oc. The Wifi seemed to work but was getting disconnected every now and then. BT did not work.

Quick question: I need to take the DMESG dump after booting or after some testing?

[m4f1050]

Actually if you follow this thread it tells you how to discover the GPIOs by a combination of switching off/on

Ok, will do that when I get back home, currently at work. I think I left the stick online so maybe I can get those later on today. Stay tuned.

[Benobi]

Correct.

wifi on, bt on - GPIO DUMP 1
wifi off, bt on - GPIO DUMP 2
Wifi on, bt off - GPIO DUMP 3
Wifi off, bt off - GPIO DUMP 4

Then use the analysis stuff from the thread Leolas created

Hi,

I just came home.
Installed NeoMode ROM from first post of this thread:

http://www.freaktab.com/showthread.php?14028-Neomode-Custom-Rom-MK809III-MTK-WiFi-Version-0-9

WiFi and bluetooth work great.

Here are all results (thanks m4f1050 for info how to do that):

1. Wifi On , Bluetooth On

gpio.wifi.on.bl.on.txt

2. WiFi Off , Bluetooth On

gpio.wifi.off.bl.on.txt

3. WiFi On , Bluetooth Off

gpio.wifi.on.bt.off.txt

4. WiFi Off , Bluetooth Off

gpio.wifi.off.bl.off.txt

If you need any more help - let me know.

D33 - thanks for your help and support

I hope bluetooth can be fixed and also 720p version can be made

Best Regards,

Benobi

[nagper]

try this

Is a MK908 a box or a stick?

It is a stick. Tronsmart mk9`8ii.
Unfortunatelly the kernel shows distorted output.

[d33]

Kitkat Kernels for All (well most!)

What resolution is reported by Ntutu?

[nagper]

I dont actually know because I cant use the system with a distortion like this. The TV itself reports 1920x1080.

[d33]

Kitkat Kernels for All (well most!)

Ugh that looks rubbish!

So you think it is the HDMI res that is wrong - hmmm

I set desktop at 1366 and forced DMT but I remember someone saying HDMI still defaulted to 1920 earlier in this thread

[d33]

Hi,

I just came home.
Installed NeoMode ROM from first post of this thread:

http://www.freaktab.com/showthread.php?14028-Neomode-Custom-Rom-MK809III-MTK-WiFi-Version-0-9

WiFi and bluetooth work great.

Here are all results (thanks m4f1050 for info how to do that):

1. Wifi On , Bluetooth On

[ATTACH=CONFIG]7304[/ATTACH]

2. WiFi Off , Bluetooth On

[ATTACH=CONFIG]7305[/ATTACH]

3. WiFi On , Bluetooth Off

[ATTACH=CONFIG]7306[/ATTACH]

4. WiFi Off , Bluetooth Off

[ATTACH=CONFIG]7307[/ATTACH]

If you need any more help - let me know.

D33 - thanks for your help and support

I hope bluetooth can be fixed and also 720p version can be made

Best Regards,

Benobi

All four files are identical?

[d33]

I'm afraid that's the end of my holiday. I fly home tomorrow morning (9 hours) so I will be back to my usual (slow) service.
l
No-one came back on the MK7601 / ESP8089 / RTL8723 variants so I guess there isn't a real demand

[Benobi]

I'm afraid that's the end of my holiday. I fly home tomorrow morning (9 hours) so I will be back to my usual (slow) service.
l
No-one came back on the MK7601 / ESP8089 / RTL8723 variants so I guess there isn't a real demand

no, sorry ...
Its really important for me (us)...
I will try to make new files ...

[m4f1050]

All four files are identical?

He did the GPIO dump, not the switches. I will upload the switches ones I just got home.

EDIT: Here are the switches

A cleaned DMESG GPIO dump: (you already have this, but this is without the boot dmesg just the GPIO table)
gpio_dmesg_stock.txt

switches:
wifi on, bt on:
gpio_dump_wifi_on_bt_on.txt

wifi off, bt off:
gpip_dump_wifi_off_bt_off.txt

wifi on, bt off:
gpio_dump_wifi_on_bt_off.txt

wifi off, bt on:
gpio_dump_wifi_off_bt_on.txt

[m4f1050]

Here is a switch dump with newer script (w0 wifi off, w1 wifi on, b0 bluetoot off, b1 bluetooth on)

w1b1:
w1b1.txt

w0b0:
w0b0.txt

w1b0:
w1b0.txt

w0b1:
w0b1.txt

EDIT:
Different switches compared (all 4 with different values side-by-side)
wifi_bt_switches.txt

I hope this last one can help you. I'm sure it has all you need. ;-)

[nagper]

Ugh that looks rubbish!

So you think it is the HDMI res that is wrong - hmmm

I set desktop at 1366 and forced DMT but I remember someone saying HDMI still defaulted to 1920 earlier in this thread

Have you added the timing mode to "kernel/drivers/video/rockchip/hdmi/hdmi-lcdc.c" ?
Maybe you could delete the other modes leaving no other choice to the kernel to choose from.