Kitkat Kernels for All (well most!)

[m4f1050]

debug14.txt

[m4f1050]

Hi d33
What do you set as wifi device driver support? Voltage 3300? Use the same pins as you.
- You have to set it as 'no wifi' then (I think my setting is correct, but can't test as I don't have such a device)
- MTK Wireless chip configuration - Mediatek MT5931 Config - Power/Reset Both as yes
- Mediatek Combo_MT66xx Wifi Config has to be disabled
- Misc devices - Mtk Wireless Chip configuration - Mediatek Discrete BT Chip MT6622, set to Yes

Please someone test these 2 kernels

http://www.mediafire.com/download/q4z0byr8dadu1mb/MT5931_kernel(v1).img

http://www.mediafire.com/download/o2z3z5aa04t67lr/MT5931_kernel(v2).img

Also working on ESP8089, but that works completely different.
Will try to upload those kernels tomorrow for testing.

mt5931_kernel(v1).txt - NCR MTK 1/CS968 - no wifi, no bt

mt5931_kernel(v2).txt - NCR MTK 1/CS968 - no wifi, no bt

[d33]

#16 uploaded.

Really hope this gets it

[d33]

bedtime

[m4f1050]

bedtime

Do we know what the difference between NCR 3.1 and NCR MTK 1/CS968 are? These kernels will not work on "ordinary" ROM's only on those 2 NCR MTK 1 and CS968 ROMS.

No-go no debug16. Good night!

debug16.txt

EDIT: This time I did not see the GPIO BUSY message on the DMESG, but the GPIO DUMP doens't have anything on 278, 279 and 282, is that normal and it's just cosmetics?

[roooii]

Downloads still offline ggrrmmpf

Finally they are back online. Awesome job on these 4.x kernels d33. But however I can't get bluetooth working with 4.2.

Could you help me if I supply you with the DMESG output?

Edit: I looked up some old kernels of yours d33. And with this kernel 4.1 version (kernel_v4.1_TVSTICK_AP6210_HD.img) bluetooth works. Strangely.

[d33]

Downloads still offline ggrrmmpf

Finally they are back online. Awesome job on these 4.x kernels d33. But however I can't get bluetooth working with 4.2.

Could you help me if I supply you with the DMESG output?

Edit: I looked up some old kernels of yours d33. And with this kernel 4.1 version (kernel_v4.1_TVSTICK_AP6210_HD.img) bluetooth works. Strangely.

Odd! 41 & 4.2 are very similar so you shouldn't notice any difference with a stick

[d33]

Do we know what the difference between NCR 3.1 and NCR MTK 1/CS968 are? These kernels will not work on "ordinary" ROM's only on those 2 NCR MTK 1 and CS968 ROMS.

No-go no debug16. Good night!

[ATTACH]7384[/ATTACH]

EDIT: This time I did not see the GPIO BUSY message on the DMESG, but the GPIO DUMP doens't have anything on 278, 279 and 282, is that normal and it's just cosmetics?

Oh how disappointing - thought this would work. :-(

Ahh! I can see it didn't init

will try to sort out the issue tomorrow. At least I know what's wrong now and think we should be close.

[d33]

Hi d33
What do you set as wifi device driver support? Voltage 3300? Use the same pins as you.
- You have to set it as 'no wifi' then (I think my setting is correct, but can't test as I don't have such a device)
- MTK Wireless chip configuration - Mediatek MT5931 Config - Power/Reset Both as yes
- Mediatek Combo_MT66xx Wifi Config has to be disabled
- Misc devices - Mtk Wireless Chip configuration - Mediatek Discrete BT Chip MT6622, set to Yes

Please someone test these 2 kernels

http://www.mediafire.com/download/q4z0byr8dadu1mb/MT5931_kernel(v1).img

http://www.mediafire.com/download/o2z3z5aa04t67lr/MT5931_kernel(v2).img

Also working on ESP8089, but that works completely different.
Will try to upload those kernels tomorrow for testing.

I'm using mt5931_kk as the source for wifi and have messed with the kconfig to get it compiling properly Mt5931 and mk_mt5931 are defined

I haven't changed the voltages

[ataroshe]

Hi,
I flashed Neomod 3.1 ROM with d33 kernel (I have 3188t, ap6210, so choosed AP6210_SD kernel) and it doesn't boot. I wait about 20min and it still was on Google TV screen. Also stick was very hot.
Neomod told me that it could be due to D33 kernel.
Can somebody advise what is with my MK809III and what should I do?

Thanks in advance.

[d33]

Kitkat Kernels for All (well most!)

Hi,
I flashed Neomod 3.1 ROM with d33 kernel (I have 3188t, ap6210, so choosed AP6210_SD kernel) and it doesn't boot. I wait about 20min and it still was on Google TV screen. Also stick was very hot.
Neomod told me that it could be due to D33 kernel.
Can somebody advise what is with my MK809III and what should I do?

Thanks in advance.

Which kernel version?

If you have a T model it may not be stabile enough for these kernels. Search for a CPU overclock only version 4.2 or higher

[ataroshe]

I used 4.2 kernel SD for AP6210.
So which should I use? 4.2 alternative for AP6210?

[m4f1050]

Oh how disappointing - thought this would work. :-(

Ahh! I can see it didn't init

will try to sort out the issue tomorrow. At least I know what's wrong now and think we should be close.

Thanks d33. I haven't replied (don't like to bug, only debug LOL) but I am here waiting for more debug kernels :-)

[roooii]

Odd! 41 & 4.2 are very similar so you shouldn't notice any difference with a stick

You were right d33. I noticed that with 4.2 bluetooth also works. But it seems that on both kernels I can't enable bluetooth from time to time. After a reboot it seems to work again.

[zero_x12]

I'm still struggling to get my touchscreen monitor to work.

Is it possible for you to apply the modification in post #2 of the following thread to add touch screen support?

http://www.freaktab.com/showthread.php?11057-Which-rom-is-best-for-using-touch-screen(s)-with-the-X7

My device ID is 2149:2306 (Advanced Silicon Multitouch). I could perhaps even pay you for your time as I really need touch support!