MK809III - KitKat 4.4 - SMIC717394 ---- 1080p ROM

[smic717394]

Thanks smic, you are very accommodating. It is very much appreciated!
I'd be interested in trying a kernel with a low end cpu frequency of 312.
I guess I'm stuck at a max of 1.4GHz, I figured that my cpu was locked. I always found it odd that my other MK809III, same model, same vendor and bought at the same time, will go up to 1.7GHz although I run it at 1.6 GHz via No-frills CPU control.

I´ll do a kernel for you. today. will upload bu the end of the day

[imaddiced2u]

If you have an MK809III with new wifi (ap6210) and an RK3188T, try the Quickshot 3.1 rom instead for the Mk902. I installed it on 4 RK3188T sticks I gave away, and it over clocked them. Only problem was that the sticks got very hot, so I ended up using another kernel. But try the stock install first and see if it works.

Another thing you could try, I never did this, is install a kernel that overclocks the RK3188T over smic's rom. I installed this over Quickshot:

http://www.freaktab.com/showthread.p...All-(well-most!)

For my TRUE RK3188 sticks, I use this ROM - normal install. Actually, smic717394 created a custom kernel to give us sound on older tv's. I am not sure if that was added to his link yet.

Both custom roms are great, I would be happy to use either one.

Hey thanks for the reply. I've tried just about every kernel I can find, seems I'm locked to 1.4GHz on this one. As I said in previous post, My other identical looking MK809III can clock up to 1.7GHz and it has the same board version as the one that won't go past 1.4GHz.

[PolloLoco]

Odd, are you sure you tried Quickshot 3.1?

Edited due to simultaneously posting.

[smic717394]

Odd, are you sure you tried Quickshot 3.1?

Edited due to simultaneously posting.

Why would I use Quickshot? I´m using mine

[PolloLoco]

Hi PolloLoco,

I can add EXFAT, I didn't see the need for it because of its limitations, regarding the launcher reset itself after reboot, I´m using the same ROM and its not happening to me.

Don't worry about it. If you ever have to update your rom, please add it - but it's only a "nice to have", not necessary. I sometimes swap the memory card from my galaxy s3, and it would be nice to make it work.

As for the dock, you've added apps to the home screen directly to the right of the "app button"? Any app I put there gets erased when I reset. I've tried several.

I think "play" mentions it also on the first page of this thread, when he talks about loss of some app on homescreen.

[PolloLoco]

Why would I use Quickshot? I´m using mine

No, sorry! I was replying to the guy that couldn't get above 1.4ghz! That rom and kernel over clocked my RK3188T.

[smic717394]

Hi,

Just to report that the wifi and bluetooth on my Mk809iii with MT59315A & MT6622 doesnt work

Thanks for all the work and all the efforts!

Best regards

Try this kernel

http://www.mediafire.com/download/ppz5b3cfi7zxboa/kernel.img

[Benobi]

Try this kernel

http://www.mediafire.com/download/pp...boa/kernel.img

Hi,

I tried your firmware from first post.
Tested built-in kernel and this one too:

http://www.mediafire.com/download/ppz5b3cfi7zxboa/kernel.img

On both WiFI and bluetooth do not work.

Please check this firmware by neomode:
http://www.freaktab.com/showthread.p...Fi-Version-0-9 (WiFi and bluetooth work there).

Can you please fix your kernel for MTK?

Regards,

Benobi

[smic717394]

Hi,

I tried your firmware from first post.
Tested built-in kernel and this one too:

http://www.mediafire.com/download/ppz5b3cfi7zxboa/kernel.img

On both WiFI and bluetooth do not work.

Please check this firmware by neomode:
http://www.freaktab.com/showthread.p...Fi-Version-0-9 (WiFi and bluetooth work there).

Can you please fix your kernel for MTK?

Regards,

Benobi

Whats your wifi and BT? this kernel have MT59315A Wifi & MT6622 BT

[Benobi]

Whats your wifi and BT? this kernel have MT59315A Wifi & MT6622 BT

MT7601 wifi chipset
mo123 sent info about drivers:
Mediatek MT7601 KitKat Wifi Patch
http://www.mediafire.com/download/hr...T7601_V2.0.rar
Can you add them?
I will test it if you could do that.

Regards,

Benobi

[smic717394]

Thanks smic, you are very accommodating. It is very much appreciated!
I'd be interested in trying a kernel with a low end cpu frequency of 312.
I guess I'm stuck at a max of 1.4GHz, I figured that my cpu was locked. I always found it odd that my other MK809III, same model, same vendor and bought at the same time, will go up to 1.7GHz although I run it at 1.6 GHz via No-frills CPU control.

Hi,

THis is a full range kernel. CPU 312 - 1800, GPU 133 - 600 and DDR 200 and 667

http://www.mediafire.com/download/fa6fyidr5mwykhg/kernel_1.8.img

[smic717394]

MT7601 wifi chipset
mo123 sent info about drivers:
Mediatek MT7601 KitKat Wifi Patch
http://www.mediafire.com/download/hr...T7601_V2.0.rar
Can you add them?
I will test it if you could do that.

Regards,

Benobi

MT7601 is just the wifi? what about the BT or is a combo?

[goyfilms]

Re: MK809III - KitKat 4.4 - SMIC717394 ---- 1080p ROM

Hi,

I tried your firmware from first post.
Tested built-in kernel and this one too:

http://www.mediafire.com/download/ppz5b3cfi7zxboa/kernel.img

On both WiFI and bluetooth do not work.

Please check this firmware by neomode:
http://www.freaktab.com/showthread.p...Fi-Version-0-9 (WiFi and bluetooth work there).

Can you please fix your kernel for MTK?

Regards,

Benobi

With neomode's firmware my wifi works fine too.
Mine are:
Wifi: MT5931SA
Bluetooth: MT6622N

I would like too a firmware with native 1080p kernel and kitkat
Can you build it please?
Thanks in advance

[Benobi]

MT7601 is just the wifi? what about the BT or is a combo?

MT6622 Bluetooth

Can you please add booth (WiFi and bluetooth) to your firmware (KitKat)?

Benobi

[Dzigi.Bau]

Hi,

THis is a full range kernel. CPU 312 - 1800, GPU 133 - 600 and DDR 200 and 667

http://www.mediafire.com/download/fa...kernel_1.8.img

I tried this kernel of yours. Could you please consider small change for us, who us it with power up the the stick through television usb port.

With D33's kernel, no gpu no ddr overclock, there was more options for HDMI output:

1080px60
1080ix60
1080px50
1080ix50
1080px24

It is important for us, this 1080i version, since all others have a problem with picture and sound flickers, which is related with more power needed for 1080p range.

Is it possible to compile kernel which would have 1080i, this i is very important, with no gpu or ddr overclock, just range 312-1608 for cpu, with correct vsync and other stuff of yours.

I use your kernel with Neo's 3.1 version of ROM, which is stable so far.