[Pipo Project] M6 Pro

[Pipo2000]

Re: [Pipo Project] M6 Pro

Antutu point 22653

Strange.... Thats rather low for this rom.
Here's my result with screen in normal mode, dev options on, no OC kernel, just stock.
All apps already restored too :

[fagotistas]

Unfortunately , location is not working. I had to use GPS with GPS fix to update my location ,temporarily , though I have always used wifi and mobile services for that purpose.

Στάλθηκε από το HTC One μου χρησιμοποιώντας Tapatalk

[dibnah]

Just installed and will work through the full test in the next few days. Love the quick reboot and my antutu is at 24462. Fantastic work in getting the sources from Pipo. Thanks Devs

[artaz]

wi fi not function

I hope you guys fix the wifi problem with the next update. I have done all I can but no resultad all.

[giouncino]

Strange.... Thats rather low for this rom.
Here's my result with screen in normal mode, dev options on, no OC kernel, just stock.
All apps already restored too :

this result cannot be compared with the tests we did with my modded kernels months ago, because, as you can see, Antutu 3D test has been changed and you can see the biggest improvement in points there... so to have a good performance comparison, you need to do an antutu test (version 5.2.0) with older ROM with my modded kernel.
Apart from benchmarks I'm sure that maakie's rom is fantastic and is for SURE better than all roms built by Pipo during almost 1 year of development!

[puZZle]

antu v5.2.0

very satisfying....

[ivo.siebi]

freeze

Rom 1.0 runs perfect but its freezing on my tablet. 10 minutes at the most before freeze. Tried kernel from first release, but it did not do the trick. It's 10 minutes, if lucky, and a freeze. I have a very unlucky cpu as no oc kernels has ever worked without problems. RR 1.8.2 runs ok with no major problems. Is the kernels in these two new roms (maakies first and 1.0) oc? The new rom feel snappier so i would love to have this working.

First, thanks for your good job, since I use rileyrom 1.82, I like my pipo again. Now I have the new rom and its great, but I have the same problem, after max. 10 min its freezing. Is there a way to get different kernel?

Thank you.

Sorry about mistakes, native language austrian.

[stevejc]

First, thanks for your good job, since I use rileyrom 1.82, I like my pipo again. Now I have the new rom and its great, but I have the same problem, after max. 10 min its freezing. Is there a way to get different kernel?

Thank you.

Sorry about mistakes, native language austrian.

Hi, I have made a modified kernel with stock voltage :

you can find here https://mega.co.nz/#!pdkWnYwJ!EyM1Xj...eLoog1y-T0ThKE

It works well for FatFreddyDK who has the same problem

Maybe the kernel has some others differences with Maakie's one.

[Pipo2000]

Hi, I have made a modified kernel with stock voltage :

you can find here https://mega.co.nz/#!pdkWnYwJ!EyM1Xj...eLoog1y-T0ThKE

It works well for FatFreddyDK who has the same problem

Maybe the kernel has some differences with Maakie's one.

Could you tell us what U modified in the kernel ?
CPU/MEM/GPU....

[Pipo2000]

this result cannot be compared with the tests we did with my modded kernels months ago, because, as you can see, Antutu 3D test has been changed and you can see the biggest improvement in points there... so to have a good performance comparison, you need to do an antutu test (version 5.2.0) with older ROM with my modded kernel.
Apart from benchmarks I'm sure that maakie's rom is fantastic and is for SURE better than all roms built by Pipo during almost 1 year of development!

Hey Giouncino,

True. Nevertheless I loved your kernels and ran RR KK1.8 with your OC kernel without any problems till last week.

I ran Antutu simply to put a number on it but for me the daily usage and the way the tablet behaves itself is the most important for me and I must say that this Rom version is really fast and fluid with stock frequency's/voltages and, for me, has no stability issues at all.

Great to hear from you again (althow it was mostly me that was abscent from the forum )

[stevejc]

Could you tell us what U modified in the kernel ?
CPU/MEM/GPU....

I have only set same voltage that you can find on stock ROM M6 pro. (or RR 1.8.2)

This firmware is based from M8HD, and there is a little difference.

And we can't use overcloamatic Tools on Maakie kernel

For CPU :
frequency = 1608 , 1350 mV
to frequency = 1608 , 1300 mV

For GPU :
frequency = 200 , 1000 mV
to frequency = 200 , 1025 mV

For DDR
frequency = 528 , 1250 mV
to frequency = 528 , 1300 mV

I think the last one is the most significant.

[giouncino]

Unfortunately I cannot prepare mod kernel for pipo anymore, now I've switched on a cube tablet and I sold my m6pro, but as far as I read this new rom is really good out of the box!
I'm happy for all m6pro users!

[giouncino]

I have only set same voltage that you can find on stock ROM M6 pro. (or RR 1.8.2)

This firmware is based from M8HD, and there is a little difference.

And we can't use overcloamatic Tools on Maakie kernel

For CPU :
frequency = 1608 , 1350 mV
to frequency = 1608 , 1300 mV

For GPU :
frequency = 200 , 1000 mV
to frequency = 200 , 1025 mV

For DDR
frequency = 528 , 1250 mV
to frequency = 528 , 1300 mV

I think the last one is the most significant.

Mod voltages for GPU are not significant (are not taken into account by the tablet)

[puZZle]

charging, not working

Hi i just noticed in the battery stats that it has been running 12h 52m and is at 42% not charging with the original usb cable plugged in and i see the usb connected notice in statusbar !!! any thoughts ???

[rrileypm]

The M6 Pro doesn't charge via USB...not enough voltage from a USB port. You have to use the stock charger. None of the M series tablets charge with USB (maybe the M7 Pro...I can't remember).