Kikat - Wasser Firmware for Beelink R89

[no_spam_for_me]

How to go to recovery mode

Use the microSwitch inside and at the end of the A/V hole with e.g. toothpick...
If you power on (plug in PSU) while pressing the microSwitch WITHOUT otg connected to pc it will start to recovery, if WITH otg connected to pc it will start to bootloader (for flashing)...

[Mirze]

What am I doing wrong

[aundp]

I'm sorry... I do NOT understand how to instal the Wasser ROM.
I tryed to help myself tith the site http://www.freaktab.com/showthread.p...-Tools-release , but it didn't go...
Please assistance

[Gormar]

Firmware update procedure

@aundp. How far you've come?

How to Update:
1.Install Driver(Release_DriverAssitant),refer to the next post;
2.Open AndroidTool_Release_v2.3, then load the ROM;
3.Plug in PSU(Power supply unit),and push and hold the button in the AV hole,then plug-in the USB OTG cable..
4. After the tool show up 'Found One LOADER Device', click 'Upgrade'.

[Gilgamesh]

does this ROM not support exFAT harddrives/USB?? I tried with exFAT but does not seem to be working, but NTFS was fine...

[aundp]

@aundp. How far you've come?

I don't succeed to load the firmware...
Thank you a lot for your patience

[Gormar]

Firmware update procedure [comprehensive]

I don't succeed to load the firmware...

To load firmware you have to press "Firmware" button on the "Upgrade Firmware" tab in AndroidTool.

By the way I found even better guide how to use this tool. You can read more here.

[maxxxy]

I wanted to try 2.0.1. but the link is blocked. can you help? thank you

[Gilgamesh]

I wanted to try 2.0.1. but the link is blocked. can you help? thank you

why do you want to try older ROM when 2.0.3 is out?

[maxxxy]

a friend told me that with version 2.0.1 of the app Sky works

I tried the 02 and 03 but it does not work

[polas]

Question: add support for no wake up on mouse movement, enable it by default

Hi folks.
Can someone explain to me that how to change the status of the wake up on mouse movement?
In wasser firmware the wake up on mouse movement is disabled by default.
It might be very convenient for me to turn ON/OFF the wake up on mouse movement with a simple toggle switch in settings menu.

[aundp]

To load firmware you have to press "Firmware" button on the "Upgrade Firmware" tab in AndroidTool.

By the way I found even better guide how to use this tool. You can read more here.

Thanks again. I managed it at last. The Factory Tool 1.33 worked. Is there any difference? The ROM works good. anyway gonna try the guide. Thanks.
By the way, I had issues with Neo A2 buttons on stock ROM, now it's solved. The 2.0.3 has all the drivers, so no need to work by myself.

[Gormar]

USB device wakeup cause system freeze.

@polas. I can not find that option right now. Maybe it was removed or forgoten by Wasser but at the and it doesn't matter. You should be able to wake up you device with mouse click. But there we encounter quite big drawback of these RK3288 devices because when you put them to sleep then it disable USB ports and any interaction with connected devices end in system freeze. USB wakeup is f...ed up.

Rock Chip do you have any good engineers ?
1. RK3288 blocked to 1,6HMz max but advertised as 1,8MHz or even 2.0GHz.
2. Video playback issues going back up to RK3188 desing.
3. And even USB suspend is broken on all tested by me firmwares (stock 110k4, wasser 2.0.x).
4. DDR memory speed set to 428MHz when nominal is 800MHz (DDR3-1600 CL11 - Mira).

[Gilgamesh]

Rock Chip do you have any good engineers ?
1. RK3288 blocked to 1,6HMz max but advertised as 1,8MHz or even 2.0GHz.
2. Video playback issues going back up to RK3188 desing.
3. And even USB suspend is broken on all tested by me firmwares (stock 110k4, wasser 2.0.x).
4. DDR memory speed set to 428MHz when nominal is 800MHz (DDR3-1600 CL11 - Mira).

let's hope a firmware update can fix the performance values...or a OC kernel maybe? if I understood correct the current OC kernel does not OC the CPU/GPU/DDR3 at all?

[aundp]

To load firmware you have to press "Firmware" button on the "Upgrade Firmware" tab in AndroidTool.

By the way I found even better guide how to use this tool. You can read more here.

Great guide for a noob like me. Thanks