[ROM] Unofficial OpenELEC for MK808B+ and MXQ

[jjbull]

sorry if this problem has already been posted,i flashed my mxq box everytthing went great but now my remote doesnt work ive tried a different remote and also plugging in a mouse and keyboard has this happened to anyone else and is there a fix

[override]

kszaq after upgrade to 5.95. every time when switch on the clock is half hour late, why is this?

[envagyok]

kszaq after upgrade to 5.95. every time when switch on the clock is half hour late, why is this?

Mine too....

And I update my 5.0.8.20 to 5.95.5 and my mxq boot very slow.

[Guest]

Maybe your right takes around 25 seconds before kodi is available.

[flying_turtle_63]

kszaq I did several more test and indeed spdif passthrough (DTS & AC3) is ok with 5.95.5 firmware 😎

[Craigthered]

Has anyone managed to get the remote to power on the box? Currently I have to reseat the power cable to turn on. Thanks

[kashmoney]

Has anyone managed to get the remote to power on the box? Currently I have to reseat the power cable to turn on. Thanks

just leave the unit powered on, it uses minimal power and can do ur kodi addon updates while ur away.

[pigbait]

Anyone else having WiFi failure on 5.95.5, I'll post log tomorrow to help with diagnostics.

[sammaz]

Anyone else having WiFi failure on 5.95.5, I'll post log tomorrow to help with diagnostics.

I thought I was also seeing this wifi going out and not connecting, but I found that it was a setting in my router that I had changed...(Turned the 2.4Ghz to "N" only) when I did that I was unable to connect to the wifi...After setting the router back to "B,G,N" on the 2.4Ghz...My mk808b plus connected again !!

Try this setting in your router.

[pigbait]

I thought I was also seeing this wifi going out and not connecting, but I found that it was a setting in my router that I had changed...(Turned the 2.4Ghz to "N" only) when I did that I was unable to connect to the wifi...After setting the router back to "B,G,N" on the 2.4Ghz...My mk808b plus connected again !!

Try this setting in your router.

Yah should of mentioned I did double check router settings, all are fine. I'll check firmware update and maybe change the channels.

[noosk]

Hi Kszaq, it's been a while since I last wrote something on this forum but have been using your amazing releases ever since.

I have just updated from 5.0.8.20 to 5.95.5-1. I had a custom MX2 remote.conf file working well before I updated, but since the update this hasn't worked. The file is still there - and for good measure I deleted it and reloaded it - but it simply doesn't work. Do I need to put the remote.conf file in another location for Isengard?

[Craigthered]

just leave the unit powered on, it uses minimal power and can do ur kodi addon updates while ur away.

Yeah that's what I'm doing just would be nice of this could be fixed if possible

[jant90]

I've been running OpenELEC from SD card for over a week from my new OTT MXQ and ever since I installed it I couldn't boot into Android anymore. This was not a big deal because I was still testing and trying everything. However, I wanted to flash OpenELEC to the NAND but I was not able to do so. I figured I would try flashing some Android images but

Whenever I get into recovery I get the error "Can't mount cache". Because of this I can't flash anything, no recovery images or Android / OpenELEC images there is always an error mounting some partition.

I believe these errors occur because my partitions are screwed up, could that in fact be the problem? I can boot into TWRP from SD card and from the terminal I ran the command "df", this is what it shows:




Also when trying the option "Repair or Change File System" on the cache, data or system partitions they show up as size 0 mb.

In the past I repartitioned an Android phone from recovery using adb, I hope I can do the same with this TV box. Can anyone share their partition table for their OTT MXQ with me please? It would be great if there is a way that the partition table could be dumped and I could simply flash it so I wouldn't have to do it manually.

Despite all this I can still run OpenELEC from SD btw.

[EDIT, SOLVED]
Managed to fix it by flashing an image using the USB Burning Tool. For reference, exact steps can be found here:

http://mbox.co.za/forum/viewtopic.php?f=62&t=182

[spartacus199]

kszaq: I want to fix analog sound via A/V port on HD18Q, default only signal Audio via HDMI can use.you have any idea? When I plug speaker via A/V port, both TV and speaker can't get Audio signal.

[HAK25]

Hello,

i want to use vpn services, but when i go into the openelec addon it isnt available under network. is this a bug from my side, or is this not available in this version of openelec (i am using the unofficial openelec for MXQ v 5.95.1)?
if it isnt available is there another way i can use vpn?
thank you for your time