LibreELEC & OpenELEC for Tronsmart Vega S95

[balbes150]

Try this option. To write an image LE to the SD card, rename the file s905_autoscript in aml_autoscript (replace existing file aml_autoscript). Run the system LE from the external media by the method of the toothpick. This version of multiboot will not be activated, but the system is running from external media. This is necessary in order to check how to work the latest version of LE on Your media box.

[hexec]

Alright LE works fine on external media (SD or USB drive). I really want to be able to load and run it from the internal storage. Has anyone been able to load LibreELEC-S905.aarch64-7.0.2.009-update.zip into the internal memory yet?

[balbes150]

Checked on my Telos. Downloaded the two files, formatted the SD card in FAT32 (the card is 16 GB). Recorded on the two files. Launched native IOS (by the way, before it was restored using the regular Android ddBR without USB cable). Opened the installed app Update&Backup, chose the archive with the update LE. Start the update. Once installed, the console rebooted in LE. Set up regular elements when you first start in the LE. All starts and runs from internal memory my Telos. Version LE 009. By the way, I discovered that in a hurry I uploaded the image to external media without packaging. In the near future will replace it with a packaged option.

[hexec]

working...thanks. I'm really not sure why it didn't work before and OE work. Very strange.

[Charbs]

I put the 2 files on an SD card (1GB) and i boot into recovery mode with the pin underneath, but the sd card wont show up in the recovery menu. Does the SD card have to be FAT32 or can it be FAT16?

[balbes150]

Uploaded the test images from Krypton.

[balbes150]

version 7.0.3.10

https://yadi.sk/d/tKC9-WKA33MWQE

[Meteordust]

Hi,

Installed the OE version on the Vega pro box on internal storage by just putting the uodate.zip file on SD card and tootpick recovery install and works fine, but actually want LE on internal storage.

LibreElec didn.t work but found out on this thread that you also need to put the ledtb.img on the sd card.

What I don't understand is step 3, what you mean with Recorded ??. you mean just copy the two files to the formatted fat 32, max 2gb partition SD card, tootpick and install update.zip from SD card.

Or is it also possible to put the LE tar file and the renamed (le)dtb.img in the update folder of Openelec and reboot?

Thanks

[balbes150]

For the transition from OE to the latest version of LE (Krypton 009 010) must use two files.
To use the tar file for the transition from the OE to LE IMPOSSIBLE.

The map should be two files

ledtb.img

https://yadi.sk/d/fQTuJZGcyHvhA

The update file is *update.zip

[Meteordust]

For the transition from OE to the latest version of LE (Krypton 009 010) must use two files.
To use the tar file for the transition from the OE to LE IMPOSSIBLE.

The map should be two files

ledtb.img

https://yadi.sk/d/fQTuJZGcyHvhA

The update file is *update.zip

Tanks for reply.

Installed LE LibreELEC-S905.aarch64-7.0.2.009-update.zip + ledtb.img on my Vega 95 Pro. Putted both files on 1gb fat 32 SD and installed it with toothpick/wipe and install zip on internal memory.
Works great, low cpu and only 200 mb ram usage.

Other question is there a release note of version 7.0.3.10 ??

[ZZM]

version 7.0.3.10

https://yadi.sk/d/tKC9-WKA33MWQE

Hi balbes,

I'm on LibreELEC-S905.aarch64-7.0.2.009 (internal memory of my Telos) and I wanted to update to 7.0.3.10.

So I put the LibreELEC-S905.aarch64-7.0.3.10-update.zip file on my SD Card with the ledtb.img, no problem. But I can't boot into recovery mode (neither by restart menu, nor with touthpick).

Have you an idea how can I do please ?

[balbes150]

For going from 009 to 010 or Krypton, you can use a tar file (to copy to the update directory and reboot the system).

[ZZM]

For going from 009 to 010 or Krypton, you can use a tar file (to copy to the update directory and reboot the system).

Thanks ! I try this right now

[Meteordust]

Thanks ! I try this right now

I tried this method on a Vega Pro box, updated from 7.0.2.009 to 7.0.3.10 with TAR file in update folder.

Also putted a modified and renamed skin.confluence (usr/share/.kodi/addons), I removed from the power menu everything except reboot, didn't see the need of all the other menu items when you do a (single LibreElec boot) internal storage install.

For me works great, what I read is that you need the two recovery files from here https://yadi.sk/d/srrtn6kpnsKz2/Libreelec/Recovery to get the recovery working again, this because the modified ledtb.img you installed earlier with 7.0.2.009, at least thats what I understood of it.

Very happy with this, didn't use this box anymore coz it was working like crap on Android with the low amount of ram, wished I had never bought it, but now works great with LibreElec/Kodi, after install 7.0.3.10 I see on info screen low cpu and only 130 mb ram usage.

Many Thanks Balbes150

[hscotty55]

version 7.0.3.10 on Tronsmart vega Pro installs and reboots fine. Then after going through the Libreelec setup and rebooting the system it hangs on the Tronsmart logo. I tried several times to reinstall and the same issue.
Works fine on the Tronsmart vega Meta.

Can you please post the correct ledtb.img files to use with the vega PRO 7.0.3.10 as well to avoid confusion. Thanks