[ROM] AlfaWise H96 PRO+ 3/16Gb - 3/32Gb - 3/64Gb - SCV7A 7.1.2 (DDR3/DDR4 and 9377 Wifi Chipset)

[superceleron]

Yesterday tried to install supersu from playstore an got a bootloopÂ*

Dont do it.. that is why i installed a moded supersu app....
In the next build it will be unrooted then you guys can install supersu or magisk by twrp as your linking.

[muncheno]

Dont do it.. that is why i installed a mooded supersu app....
In the next build it will be unrooted then you guys can install supersu or magisk by twrp as your linking.

Can't wait to test it out.
Greatz to hear that SC4 is in progress.

Thanks again for your hard works. Appreciated.

[Wyle]

Hey guys, i have an H96 pro plus 3 gb of ram and 32 of internal storage, but it's not an alfawise box, the alfawise logo it's not present on the box, will this rom works on my box?

Belyakov- I have the same Box, DDR3 Ram, and it does work with this SCV3 ROM! Heat temps run a bit high but I found this only happens if you output to 4K resolutions, that seems to drive temps up since it runs cool if I run it at 720p TV OUTPUT all night.

I bought my box off ****... it was advertised as H96 PRO+ 3G+32G (DDR3).

[Belyakov]

Dont do it.. that is why i installed a moded supersu app....
In the next build it will be unrooted then you guys can install supersu or magisk by twrp as your linking.

What is the right supersu to install here in this box?

Enviado desde mi ONEPLUS A3000 mediante Tapatalk

[superceleron]

What is the right supersu to install here in this box?

Enviado desde mi ONEPLUS A3000 mediante Tapatalk

none!
If you do and them update su bin you are done!

[kwabh]

When power on H 96 PRO + -it does not boot further - it shows only H 96 Pro + on tv screen. may be wrongly exited from last channel visited.

[kwabh]

How to do it ??

[tombraga]

my tv-box arrived about 3 weeks ago and came already with the nougat version. Is there any advantage to change to the beta-version rom from here?

generally it´s working fine, i shut down or restart with the icon and not with control

but sometimes the box is freezing, for example when i am looking my sat channels with the sat-ip app (tivizen), but also when i am connected to some german mediathek channels like ARD - ZDF a.s.o.

Is this freezing a problem of the rom? or the players of the apps? or some other hardware problem of the box?

i am connected with ethernet cable and the speed is good (about 95 Mbs)

superceleron - what is your opinion about the freezing?

here some infos about the settings





this is my drm-info

[superceleron]

is freezing because the stock rom is hot.. real hot..
I recommend you open some holes in the box.

[TheBloke]

This is my first post on this forum, so - hello!

Thanks so much superceleron . I came to this forum because I could not get my H96 Pro+ DDR4 (generic/unbranded - no Alfawise logo) working 100% with any ROM. Stock and modded 6.0.1 ROM had the screen-too-dark issue in YouTube and Netflix (I believe this is caused by wrong color space? 16-235 not 0-255.) That was fixed in stock 7.1.1, but then that ROM had new problems: completely insecure Root with no SuperSU/SuperUser possible, no XPosed possible, and other root-related issues - like Tasker reporting no Root features.

I came here to write a long post asking how to fix the screen-dark issue because I thought I couldn't use any of these ROMs on my DDR4 box. But then I did a bit more reading, saw maybe it might work.. and it does! One suggestion: remove the "DDR3 only" label? It really seems to work fine on DDR4 boxes!

In case it is helpful for anyone coming after me, this is a confirmation that the following steps worked fine on my H96 Pro+ 3GB/32GB DDR4 Q9377 box:

1. First I re-installed Stock 7.1.1 ROM as I had a custom ROM (XnetfoX eXtreme 6.0.1) installed and wanted to install SCV2 from a vanilla starting point.
2. I flashed SVC2 using SD Card with Burn Card Maker 2.02 - ROM renamed to update.img, all boxes ticked except Erase Bootloader unticked, then boot H96 with reset button held down
3. Booted, did initial config, all fine; added my Bluetooth mini trackpad/keypad no problems
4. Copied the SVC3 OTA ZIP to an SDCard, put it in H96 Pro+, ran Update app: chose Local Update; selected the zip file; chose Wipe Data; install ran fine.
5. Booted, did initial config again, all fine
6. Did SuperSU update - first time I tried it said SU was "locked", but after one more reboot it updated fine.

More good news: I was able to update Netflix! The OP said it was broken, but I thought I would try anyway because I knew it worked OK on the stock 7.1.1 ROM. I used Aptoide to update it to 5.3.0 build 19261, which is the newest build by date. And so far it seems absolutely fine - I've only watched a few minutes of a couple of programs, but haven't found any issues, even after multiple reboots.

The ROM feels very fast - definitely quicker than the stock ROMs (both 6.0 and 7.1) when loading and switching apps. I was always a little disappointed that the stock H96 didn't seem as responsive as I felt an 8-core/3GB box should be. Now it is!

I didn't manage to get XPosed Framework installed yet. I got the Installer on there and downloaded the Framework which rebooted to TWRP for installation, but then when I tried to install the ZIP I got a bunch of installer errors. That's not surprising as the 7.1.1 framework is still early beta. I might try to investigate it in more detail later.

Thanks again for all the amazing work on this!

[Belyakov]

Today i tried to install SCV2 with burn card maker 2.0.2, all the process of preparation of the SD card was sucesfull, but i got this error trying to install, pressed the reset button, connect the power cable to the box hold the reset button for a few seconds and nothing happened, only this Android logo with an X on it

Enviado desde mi ONEPLUS A3000 mediante Tapatalk

[tombraga]

is freezing because the stock rom is hot.. real hot..
I recommend you open some holes in the box.

is this a joke? open some holes?

i thought you would tell me to try your rom instead the original rom

[superceleron]

nop is not a joke... if you read the thread you see the case of this box is to closed, no vents (only some in the underside)
and that is nearly enough... of course is up to you.
And yes in my rom is a little cooler!

[TheBloke]

Today i tried to install SCV2 with burn card maker 2.0.2, all the process of preparation of the SD card was sucesfull, but i got this error trying to install, pressed the reset button, connect the power cable to the box hold the reset button for a few seconds and nothing happened, only this Android logo with an X on it

Did you rename the file to update.img before burning it? Someone earlier said that was a required step.

Anyway I think now that this has happened, you need to try burning again using the USB burning software (which is superceleron's recommended method anyway). You need a USB A to USB A cable to do it.

[tombraga]

You need a USB A to USB A cable to do it.

that means, that i have to open the box and "break the wall", because i heared that the only ota-usb port is hidden. There are more 2 usb connectores hiddeen in the box and one of it i have to make the connection with the usb a cable.

is this correct?

[Belyakov]

I dont have an usb a to usb a cable, I read that TheBloke did it with burn card maker 2.0.2, that's why I tried with it 
Gonna try again renaming the image file to update.img

[muncheno]

is this a joke? open some holes?

i thought you would tell me to try your rom instead the original rom

No jokes!
Checkout some of the earlier posts here.