[ROM] Mecool M8S Pro TVStock Nexus ROM (Android TV 7.1)

[Novato]

It's like the call to the wi-fi tried to start a process that is not responding. Then he will try another option. But it's just a guess. The first time I start the wi-fi it shuts off, if I wait a while and try again it will start normally.

[lyubodelev]

It's like the call to the wi-fi tried to start a process that is not responding. Then he will try another option. But it's just a guess. The first time I start the wi-fi it shuts off, if I wait a while and try again it will start normally.

Mamma mia!!!

[supermal]

It's like the call to the wi-fi tried to start a process that is not responding. Then he will try another option. But it's just a guess. The first time I start the wi-fi it shuts off, if I wait a while and try again it will start normally.

http://www.bee-link.com/forum.php/fo...&extra=&page=3 here is a link to someone with same problem.your box can be recovered but just need to get conditions right.the laptop you had might not have had the right drivers?

[Novato]

Mamma mia!!!

This is quite complicated. Sometimes with the modifications for Android TV interface it starts Wi-fi when you start the device, and sometimes not starts automatically. I've already given up and I'll probably leave the default interface. For these reasons I am obliged to give up Mecool for to focus on the MiBox, even having lower configurations.

[Novato]

http://www.bee-link.com/forum.php/fo...&extra=&page=3 here is a link to someone with same problem.your box can be recovered but just need to get conditions right.the laptop you had might not have had the right drivers?

I took a look and I'm more excited now, although I will not do it now. Thank you very much for the help and dedication in trying to help me. Thank you both!

[lyubodelev]

.

Try this!

[Novato]

Try this!

The device connected to the wi-fi, the problem is that when I turn on the device it is not able to start wi-fi, I do not know how to talk the way the developers would say, but if I click on off by itself. But when it finally goes live, it connects instantly with the wi-fi network and without keeping it until I reboot the device.

[Novato]

In other words it is not a rejected connection problem but a hardware and software problem on the device.

[lyubodelev]

The error persists, always generating at 7% ... I held how you directed me

Found an interesting solution of the problem on 4pda:
http://4pda.ru/forum/index.php?showt...ost&p=72601887
When USB BT showed an error on 7% this guide pull off the USB cable by mistake. He was threatened of what he has done and quickly pulled in the cable back and, o, miracle - the process came to 100%!
From this point, he regularly uses this method!

[Novato]

Found an interesting solution of the problem on 4pda:

http://4pda.ru/forum/index.php?showtopic=811161&view=findpost&p=72601887

Thanks, I'll take a closer look this weekend.

[Novato]

Let me see if I understood, he removed the USB cable quickly and then quickly put it back? Or type it removes the cable does not put more? Because there would be no logic. lol

[lyubodelev]

Let me see if I understood, he removed the USB cable quickly and then quickly put it back? Or type it removes the cable does not put more? Because there would be no logic. lol

The first one, but not so quickly...
Just at one time namuchalsya with firmware. 7% gave an error. What I just did not try .. Got thorough. And then accidentally after the error was displayed, pulled out the USB cable from the console, got scared and put it back (on the screen 7%) .. The computer picked up the console, and the program as if nothing had happened to continue to sew .. Miracle, but the firmware has become. Till now I use ..

[lyubodelev]

I personally do the same thing, I do not press the reset button and USB BT gives me the same error, but on 2%. Then I pulled out and then back pulled in the USB cable to the box. The process continues to 100%!
People call this laziness...

[Novato]

I personally do the same thing, I do not press the reset button and USB BT gives me the same error, but on 2%. Then I pulled out and then back pulled in the USB cable to the box. The process continues to 100%!
People call this laziness...

It is normal for the process to continue, I even tried it several on Sunday, but then returned the error at 7% ... I will try to do everything on the next Domifo, maybe with another PC and another USB Cable.

[lyubodelev]

It is normal for the process to continue, I even tried it several on Sunday, but then returned the error at 7% ... I will try to do everything on the next Domifo, maybe with another PC and another USB Cable.

Certainly!