[ROM] Beelink GT-King ALVATECH Standard Android (9.0 Pie) S922X

[sesdave]

Alvatech - are you going to create a new release soon incorporating any relevant changes in latest 904P0 rom.

Posted by Trebor

https://beelink-my.sharepoint.com/:f:/g/personal/firmwareservice_beelink_onmicrosoft_com/EmWjrnZIE9hCoSX9sxXil0wB8LrvyhcLGe7wF8yn8cLSbQ?e=Nrm3NV

[ALVATECH]

I've seen the update and I know of it. But still pretty busy at the moment and also there doesn't seem to be any major changes in the last update. I had recently posted that I'm debating to even make an update or wait for another update with hopefully something worth updating too. It looks like they will be hopefully fixing the status bar. If you look at link down below you'll see what they mentioned.
Thank you,

Alvatech

Link:

http://www.bee-link.com/forum.php/forum.php?mod=redirect&goto=findpost&ptid=52099&pid=69252&fromuid=16949

[johnsemple123]

Hello,
Thank you so much for the Donation much appreciated. I have still been pretty busy so still haven't had a chance to get any update going. Not much changes with new update so debating to even release something yet or wait for hopefully a bigger change.
Thanks again,

Alvatech



Sorry not sure what's happening. You might try to reflash the box one more time, and if it continues to give you issues then you may have a faulty box. You may try SD-Card method if the USB tool isn't working for you.
Thank you,

Alvatech

I (didn't think this would work as at first it wasn't)! but I did fix it I changed USB ports using the flash tool on my computer (strange I know) I did that and flashed official beelink firmware and it's back to the way it was from the beginning. PHEW again! NO more experiments I think!

[ALVATECH]

I (didn't think this would work as at first it wasn't)! but I did fix it I changed USB ports using the flash tool on my computer (strange I know) I did that and flashed official beelink firmware and it's back to the way it was from the beginning. PHEW again! NO more experiments I think!

I'm glad you got it going. Not sure why it was acting that way in the first place. But sometimes it can be USB ports, USB cables and or you may need to uninstall and re-install the USB Burning Tool software again, this seems to work sometimes too.
Thank you,

Alvatech

[johnsemple123]

I'm glad you got it going. Not sure why it was acting that way in the first place. But sometimes it can be USB ports, USB cables and or you need to uninstall and re-install the USB Burning Tool software again, this seems to work sometimes too.
Thank you,

Alvatech

I did follow instructions say erm put the USB cable into the USB 2 hub on the box and to safe myself put the other end into a USB2 port on my PC (Was not playing ball) but all of a sudden decided to change the USB port on the PC to one of my USB3 ports and voila) immediately started working. I might have flashed the firmware wrong too in the first place but I am back on stock and won't experiment again for a while incase next time i'm not so lucky!

[ALVATECH]

I did follow instructions say erm put the USB cable into the USB 2 hub on the box and to safe myself put the other end into a USB2 port on my PC (Was not playing ball) but all of a sudden decided to change the USB port on the PC to one of my USB3 ports and voila) immediately started working. I might have flashed the firmware wrong too in the first place but I am back on stock and won't experiment again for a while incase next time i'm not so lucky!

Yes, using a USB 3.0 port on your PC actually does have a little more juice, I've noticed they work better using a USB 3.0 port on a PC when flashing these boxes.
Thank you,

Alvatech

[raruba]

Alvatech - are you going to create a new release soon incorporating any relevant changes in latest 904P0 rom.

Posted by Trebor

https://beelink-my.sharepoint.com/:f...cLSbQ?e=Nrm3NV

This Rom doesn't work on the S992X...I tried it, just a black screen.

[ALVATECH]

This Rom doesn't work on the S992X...I tried it, just a black screen.

This ROM is made for SN: B922 only. They haven't released one for 922X yet.
Link for more info:

https://forum.freaktab.com/forum/tv-player-support/amlogic-based-tv-players/s922x/others-s922x/firmware-roms-tools-dq/783311-firmware-gtking-b922-version-ddr4-v904p0

[matze54]

Only USB 3.0 port worked on my GT King. Also confirm changing cables might help. I tried with 3 until one worked. I think its a bit "trial and error" but the rom of alvatech is worth it:-) It is the B922 version. To be more clear: USB 2.0 port at PC, USB 3.0 port at box.

[mikehcl]

hi to all, I recently received my box king and today I tried to install this rom, unfortunately I had a lot of problems, USB burning tool 2.1.7 immediately recognized my box but at 3% it blocked me with an error " romcode / bl2 boot stage error "to install the rom I had to uncheck" erase bootloader "and now I have installed everything correctly. everything works but it does not seem normal to me that there is that error. can anyone tell me why or did he have the same problem?
Up. ? Is it a problem if I install the rom without erase the bootloader? it's the only way to install the firmware (I've tried other roms, including the last official one). if cue "erase bootloader" gets stuck at 3% with the error I mentioned above. Thanks.

[raruba]

This ROM is made for SN: B922 only. They haven't released one for 922X yet.
Link for more info:

https://forum.freaktab.com/forum/tv-...on-ddr4-v904p0

Thanks...good to know. This box is very hard to flash, really gotta mess with it a lot.

[ALVATECH]

hi to all, I recently received my box king and today I tried to install this rom, unfortunately I had a lot of problems, USB burning tool 2.1.7 immediately recognized my box but at 3% it blocked me with an error " romcode / bl2 boot stage error "to install the rom I had to uncheck" erase bootloader "and now I have installed everything correctly. everything works but it does not seem normal to me that there is that error. can anyone tell me why or did he have the same problem?
Up. ? Is it a problem if I install the rom without erase the bootloader? it's the only way to install the firmware (I've tried other roms, including the last official one). if cue "erase bootloader" gets stuck at 3% with the error I mentioned above. Thanks.

Hello,
Not sure why you got that problem in the first place. But you don't need to worry about unchecking bootloader issue you had, it's not needed. It could be what we had mentioned before, such as bad USB cable, USB port (maybe a different port works better USB3.0 on PC) and or uninstall and re-install USB Burning tool. It could of been any of these issues. But by unchecking erase bootloader this will not hurt your box.
Thank you,

Alvatech

[kobo]

is the notification bar problem fixed? also can i root with magisk?

[ALVATECH]

is the notification bar problem fixed? also can i root with magisk?

Hello,
Please read the following links down below.
Thank you,

Alvatech

Links:

https://forum.freaktab.com/forum/tv-player-support/amlogic-based-tv-players/s922x/others-s922x/firmware-roms-tools-dq/778508-rom-beelink-gt-king-alvatech-standard-android-9-0-pie-s922x?p=783409#post783409

https://forum.freaktab.com/forum/tv-player-support/amlogic-based-tv-players/s922x/others-s922x/firmware-roms-tools-dq/778508-rom-beelink-gt-king-alvatech-standard-android-9-0-pie-s922x?p=782897#post782897

[ClarkKent]

ALVATECH Assuming you read every post...are you hearing of some (more than a few) radio issue or bugs, as I've see over SC's rom thread?

[Activator]

Alvatech, can this rom work on Beelink GT1 mini s/n 95X2 ?