Pipo M9 Pro RileyROM 2.0

[M9ProPipo]

launcher look

/what version are you talking about, those icons look different. Are you running a different launcher?

from the screenshot it seems 'Ios7 Flat' and Elegance (Apex theme) are installed. perhaps one of those?

[herrjemineh]

when i boot to flash with rkbatchtool the following happens:

the flashtool shows the right: found rockchip loader.

but when i click erase idb, it starts and quits with error

when i click on flash the rileyrom it starts and quits with error.

after it stops booting while showing the pipo logo

if so, then i can reflash the original rom via rkbatchtool

[rrileypm]

Re: Pipo M9 Pro RileyROM 2.0

Are you using the USB cable that came with the tablet? It sounds like your USB connection isn't optimum. Try a different USB 2.0 port.

Sent from my M6pro using Tapatalk 2

[herrjemineh]

yes, this is the only one working...

i tried all three usb ports on my laptop...

flashing the original rom with rkbatchtool is never a problem...

[rsbuffalo]

Manual Flash Mode:

Power off tablet. From the tablet being powered off plug-in to PC and start flash tool on PC. Then hold both buttons down at the same time until you see device found on flash tool and release both buttons. Pipo M9 Pro should be in flash mode with blank black screen. Tool should now work. This should work if drivers are installed correctly.

[herrjemineh]

Done... good one, thanks a lot.. that worked instantly. Different question, is it normal that the device is making ticking sounds threetines while booting? Sounds like a harddisk with headcrash. But it is working fine

Am Ende ist alles gut, und wenn nicht alles gut ist, dann ist es auch nicht das Ende...

[rrileypm]

Re: Pipo M9 Pro RileyROM 2.0

I have noticed that on most pipo tablets when transitioning from kernel to boot.img to system.img during the boot sequence.

I think it has to do with loading sound drivers. Some tablets are louder than others. I notice it most on my M6 Pro.

Sent from my M6pro using Tapatalk 2

[netRAT]

This may sounds like a silly question but I was wondering whether all recent rom updates are SDK2.0?


Sent from my M9pro using Tapatalk

[Kastrup]

Testing 2.0 concluded - 'auto restart' remains ...

Hi everyone,
I have just concluded testing Randy's 2.0 after all these days and have to admit that nearly everything works just fine

The only issue that I have left is the 'irritating' auto-start from a sleep state. The tablet resets without a warning in different intervals a few times per day if I leave it in a sleep state.
I wonder how many other M9Pro owners experience the same issue as I have in mind to report it to Pipo.
/Kastrup

[picaye]

bluetooth audio streaming working fine for you or not tested?

Hi everyone,
I have just concluded testing Randy's 2.0 after all these days and have to admit that nearly everything works just fine

The only issue that I have left is the 'irritating' auto-start from a sleep state. The tablet resets without a warning in different intervals a few times per day if I leave it in a sleep state.
I wonder how many other M9Pro owners experience the same issue as I have in mind to report it to Pipo.
/Kastrup

[Kastrup]

bluetooth audio streaming working fine for you or not tested?

Not tested as I never use it on a tablet

[the5th2000]

Done... good one, thanks a lot.. that worked instantly. Different question, is it normal that the device is making ticking sounds threetines while booting? Sounds like a harddisk with headcrash. But it is working fine

Am Ende ist alles gut, und wenn nicht alles gut ist, dann ist es auch nicht das Ende...

I don't know if it's normal, but mine does it too....

[ludoke]

I don't know if it's normal, but mine does it too....

Mine does it too so it's normal

[VILLAR4911]

PIPO M9 PRO RILEYROM 1.9B----2.1

GOOD WORK, I'VE TRIED TO USE MY USB HOST WITH NO LUCK (KINGSTON 32GB). SO I UPDATED TO RILEYROM 2.1, AND THE UNIT WILL NOT BOOTUP. I RE-FLASHED TO 1.9B, BACK TO NORMAL. DO I NEED TO GO IN-ORDER 2.0 THEN 2.1. PLEASE ADVISE.....

[rrileypm]

No, you shouldn't have go in any particular order.

I'm not sure why it isn't booting...other users are reporting good results.