Binary patched kernels for Pipo models

[giouncino]

Buongiorno,

at first, sorry for my bad english.

I tried to install the very low Kernel in the recovery mode....
TWRP said "failed" and now I cant boot the system. RR 1.8 don't start, it reboot only in the recovery mode

what can I do now?

Roland

EDIT: I solved the Problem and flashed the Rom again, thanks for reading

Not necessary: you need only to flash the misc.img to go outside TWRP.

To flash the mod kernel you need to EXTRACT the file inside the ZIP and flash the kernel with the flash tool (NOT TWRP!!!!!). You can flash the KERNEL ONLY (= no data loss)

[Divemaster]

Not necessary: you need only to flash the misc.img to go outside TWRP.

To flash the mod kernel you need to EXTRACT the file inside the ZIP and flash the kernel with the flash tool (NOT TWRP!!!!!). You can flash the KERNEL ONLY (= no data loss)

thanks for the answer, tablet runs, but not fine.... the PlayStore dosnt work properly, I can't download Aps, error 403 !?

[giouncino]

thanks for the answer, tablet runs, but not fine.... the PlayStore dosnt work properly, I can't download Aps, error 403 !?

other users have the same issue.
It is not related to the kernel....

At the moment I can't help you more than this!

[Divemaster]

other users have the same issue.
It is not related to the kernel....

At the moment I can't help you more than this!

this issue is be solved. Settings/security/unknown sources
was missed. Now Playstore workes fine.
And than I tried to flash the Kernel by your explaination... done, reboot, and now I see only the first grafik from rileyrom... 15min..... nothing more!?

[ninjakura]

Re: Binary patched kernels for Pipo models

this issue is be solved. Settings/security/unknown sources
was missed. Now Playstore workes fine.
And than I tried to flash the Kernel by your explaination... done, reboot, and now I see only the first grafik from rileyrom... 15min..... nothing more!?

I have got the same issue. Can't even reset the tablet. Zzzzz

Sent from my ZP990 using Tapatalk

[giouncino]

I have got the same issue. Can't even reset the tablet. Zzzzz

Sent from my ZP990 using Tapatalk

Don't worry:

use the reset pin to switch off the tablet
connect the tablet via USB to the PC
open the flash tool
simultaneously press power AND volume+ for a while
wait until "RKloader found" on the flash tool on PC
try flashing another kernel (ONLY THE KERNEL and WITHOUT ERASING IDB)

You probably need a kernel with higher voltages like the stock (try to flash the "kimmen" version that is the one that will work for SURE)

NOTE: remember to extract the kernel before select kernel to be flashed!!!!

[ninjakura]

Re: Binary patched kernels for Pipo models

Don't worry:

use the reset pin to switch off the tablet
connect the tablet via USB to the PC
open the flash tool
simultaneously press power AND volume+ for a while
wait until "RKloader found" on the flash tool on PC
try flashing another kernel (ONLY THE KERNEL and WITHOUT ERASING IDB)

You probably need a kernel with higher voltages like the stock (try to flash the "kimmen" version that is the one that will work for SURE)

NOTE: remember to extract the kernel before select kernel to be flashed!!!!

Hav tried. Not working at all. Now even the first riley rom graphic does not appear. When i connect to pc, flash tool just recognize my tablet only for 5 secs.

Have no idea what to do now.

Sent from my ZP990 using Tapatalk

[giouncino]

Hav tried. Not working at all. Now even the first riley rom graphic does not appear. When i connect to pc, flash tool just recognize my tablet only for 5 secs.

Have no idea what to do now.

Sent from my ZP990 using Tapatalk

try to connect the tablet to the wall charger and follow the steps I've posted above.
Don't worry, You've not bricked the tablet!!

[ninjakura]

Re: Binary patched kernels for Pipo models

try to connect the tablet to the wall charger and follow the steps I've posted above.
Don't worry, You've not bricked the tablet!!

It's ok now. I removed sd card before pressing volume + and power button. I have no idea at all why it worked. LoL.

Sent from my ZP990 using Tapatalk

[giouncino]

It's ok now. I removed sd card before pressing volume + and power button. I have no idea at all why it worked. LoL.

Sent from my ZP990 using Tapatalk

good to know!

[r0llingmuffin]

how do i flash a custom kernel?

Is there a guide "how to flash custom kernel"? ..... do i have to backup my old kernel and how? ........ sorry, but i'm a noobie ...

[giouncino]

Is there a guide "how to flash custom kernel"? ..... do i have to backup my old kernel and how? ........ sorry, but i'm a noobie ...

read post #485

it is not necessary to backup stock kernel (it is included in the rileyrom suite)

[r0llingmuffin]

read post #485

it is not necessary to backup stock kernel (it is included in the rileyrom suite)

thank you for your reply ..... :-)

[todguy]

Re: Binary patched kernels for Pipo models

You don't really "need" to update the kernel but it can give you a bit more performance as well as save some battery due to the reduced voltage. Individual CPUs don't all have identical performance / stabillity which is why Giouncino gives us a few to try for each rom version. I haven't tried them all but usually use the one labelled "claro" which gives an extra 1000 points on Antutu or +5% with respect to stock.

Thanks, ill give it all a go tomorrow.

Sent from my GT-I9100 using Tapatalk

[nodabble]

I'm thinking of putting the kit kat 1.8 final on my unstable stock 4.2.2 M6 pro wfi, but after reading the threads I think I also need to update the kernel too. However, how do I tell quick one I need?

Before you upgrade to Kitkat, try the '825...' kernel from post #470 on the previous page...

http://www.freaktab.com/showthread.php?7871-Binary-patched-kernels-for-Pipo-models&p=138327&viewfull=1#post138327

My M6 Pro Wifi was never 100% stable until I installed that, and I'm still using RR1.4!!!

If you do upgrade to RR1.8, giouncino has kindly done a version of the '825' kernel for that ROM.