Binary patched kernels for Pipo models

[giouncino]

The rom I have installed is this Pipo M6 Pro 1.8 RileyROM KitKat and kernel that works with me are these:

kernel_kitkat_1.8_cpu stock_gpu600h STOCK_ddr720_Kimmen.zip
kernel_kitkat_1.8_cpu_stock_with_reduced_voltages_ gpu600_ddr720.zip
kernel_kitkat_1.8_cpu1704h_1325mV_gpu600h STOCK_ddr720_Claro.zip
kernel_kitkat_1.8_cpu1704h_gpu600_ddr720.zip
kernel_kitkat_1.8_cpu1704h_gpu600h STOCK_ddr720_VERY_LOW_V2.zip
kernel_kitkat_1.8_cpu1704h_gpu600h STOCK_ddr720_825_users.zip

The truth is I do not know what I do wrong, because everyone seems to work for you. thanks

which one of the latest kernel I've published did you try?

[lgalher]

If probe recent kernel and I do not work. i put the file prior libril stock and nothing.
I tried to install these:
https://www.dropbox.com/s/hu6gauyot3...600_ddr672.zip (cpu1704h_VERY_LOW 672) EXTREMELY SLOW BUT IT WORKS
https://www.dropbox.com/s/a3369zlwvw...600_ddr744.zip (cpu1704h_VERY_LOW 744) INSTALLED BUT IS FROZEN IN THE HOME SCREEN. https://www.dropbox.com/s/8mh7cfnimr...600_ddr768.zip ((cpu1704h_VERY_LOW 768) INSTALLED BUT IS FROZEN IN THE HOME SCREEN.

I use my tablet specifically the kernel_kitkat_1.8_cpu1704h_gpu600h STOCK_ddr720_VERY_LOW_V2.zip because new me was impossible they can be used.

[giouncino]

If probe recent kernel and I do not work. i put the file prior libril stock and nothing.
I tried to install these:
https://www.dropbox.com/s/hu6gauyot3...600_ddr672.zip (cpu1704h_VERY_LOW 672) EXTREMELY SLOW BUT IT WORKS
https://www.dropbox.com/s/a3369zlwvw...600_ddr744.zip (cpu1704h_VERY_LOW 744) INSTALLED BUT IS FROZEN IN THE HOME SCREEN. https://www.dropbox.com/s/8mh7cfnimr...600_ddr768.zip ((cpu1704h_VERY_LOW 768) INSTALLED BUT IS FROZEN IN THE HOME SCREEN.

I use my tablet specifically the kernel_kitkat_1.8_cpu1704h_gpu600h STOCK_ddr720_VERY_LOW_V2.zip because new me was impossible they can be used.

try a "less demanding" version, as one of these:

https://www.dropbox.com/s/xl3zmjvtaq...600_ddr648.zip
https://www.dropbox.com/s/0sfnnk8diy...600_ddr672.zip
https://www.dropbox.com/s/vs6sh8tak6...600_ddr744.zip
https://www.dropbox.com/s/pahtame7nm...600_ddr768.zip

just to see if is a problem of all new kernels

[lgalher]

Thanks, will try them when I get home. I'll tell you.

[lgalher]

I installed the kernel you had told me and these are one on one results :

kernel_GPS_1.3_cpu_stock_gpu600_ddr768 icon and android is locked
Icon kernel_GPS_1.3_cpu_stock_gpu600_ddr744 bootanimation android and starts , starts making a noise and turns off.
Icon kernel_GPS_1.3_cpu_stock_gpu600_ddr672 bootanimation android and starts , and stays there .
Icon kernel_GPS_1.3_cpu_stock_gpu600_ddr648 bootanimation android and starts , and stays there .

These kernels without problems :

kernel_kitkat_1.8_cpu stock_gpu600h STOCK_ddr720_Kimmen.zip
kernel_kitkat_1.8_cpu_stock_with_reduced_voltages_ gpu600_ddr720.zip
kernel_kitkat_1.8_cpu1704h_1325mV_gpu600h STOCK_ddr720_Claro.zip
kernel_kitkat_1.8_cpu1704h_gpu600_ddr720.zip
kernel_kitkat_1.8_cpu1704h_gpu600h STOCK_ddr720_VERY_LOW_V2.zip
kernel_kitkat_1.8_cpu1704h_gpu600h STOCK_ddr720_825_users.zip



Today I Wear kernel_kitkat_1.8_cpu1704h_gpu600h STOCK_ddr720_VERY_LOW_V2.zip.Va fine but I wanted to try these to see if they improve .

No longer whether it is normal or only happens to me .

thanks

[giouncino]

I installed the kernel you had told me and these are one on one results :

kernel_GPS_1.3_cpu_stock_gpu600_ddr768 icon and android is locked
Icon kernel_GPS_1.3_cpu_stock_gpu600_ddr744 bootanimation android and starts , starts making a noise and turns off.
Icon kernel_GPS_1.3_cpu_stock_gpu600_ddr672 bootanimation android and starts , and stays there .
Icon kernel_GPS_1.3_cpu_stock_gpu600_ddr648 bootanimation android and starts , and stays there .

These kernels without problems :

kernel_kitkat_1.8_cpu stock_gpu600h STOCK_ddr720_Kimmen.zip
kernel_kitkat_1.8_cpu_stock_with_reduced_voltages_ gpu600_ddr720.zip
kernel_kitkat_1.8_cpu1704h_1325mV_gpu600h STOCK_ddr720_Claro.zip
kernel_kitkat_1.8_cpu1704h_gpu600_ddr720.zip
kernel_kitkat_1.8_cpu1704h_gpu600h STOCK_ddr720_VERY_LOW_V2.zip
kernel_kitkat_1.8_cpu1704h_gpu600h STOCK_ddr720_825_users.zip



Today I Wear kernel_kitkat_1.8_cpu1704h_gpu600h STOCK_ddr720_VERY_LOW_V2.zip.Va fine but I wanted to try these to see if they improve .

No longer whether it is normal or only happens to me .

thanks

I don't have any more ideas at the moment...
the most similar kernel wrt the one you are using is https://www.dropbox.com/s/a3369zlwvw...600_ddr744.zip
and I don't think there is something wrong that prevent the tablet's boot...

If you want, you can try reflashing the whole rom using this kernel from the whole flash process https://www.dropbox.com/s/a3369zlwvw...600_ddr744.zip

[lgalher]

I don't have any more ideas at the moment...
the most similar kernel wrt the one you are using is https://www.dropbox.com/s/a3369zlwvw...600_ddr744.zip
and I don't think there is something wrong that prevent the tablet's boot...

If you want, you can try reflashing the whole rom using this kernel from the whole flash process https://www.dropbox.com/s/a3369zlwvw...600_ddr744.zip

Giouncino Thanks for your interest, but no way, I've done what you've told me nothing.
However I flashed the rom but with the kernel_kitkat_1.8_cpu1704h_gpu600h STOCK_ddr720_VERY_LOW_V2.zip and perfect.

[Pipo2000]

Giouncino Thanks for your interest, but no way, I've done what you've told me nothing.
However I flashed the rom but with the kernel_kitkat_1.8_cpu1704h_gpu600h STOCK_ddr720_VERY_LOW_V2.zip and perfect.

This doesnt make any sense....

At first i thought it was related to your ram speed, then again you have 2 failures with kernels where RAM speed is below 700Mhz and that should normaly always work, certainly when CPU is at stock speed.

I'm afraid you have a particular dificult tablet.

[jastaz23]

U8

No love for U8...

[X-Ray]

Hi Giounino,
I, like to remod (with my best known cpu settings)on of your latestr 1.3 kernel please can you upload the script ( changed for KK kernel)again for KK kernel and m6pro3g
Because i change the ddr tablet to 744001 and run the script.
The Overclocomatick told no table 8 exist..

[herrjemineh]

Just change from 744001 to 744256 should work

[X-Ray]

Ah ok i will try ...THX
Greetings from Germany
Ray

[X-Ray]

Hamm ...
..8
Table does not exist.
Whats wrong?
Ray

[herrjemineh]

Dann hast du wahrscheinlich irgendwo n komma oder ne klammer gelöscht, welches script hättest du denn gerne?

[giouncino]

Hamm ...
..8
Table does not exist.
Whats wrong?
Ray

you need an updated script to be used on kitkat