K-R42 - wasser firmware - JB Android 4.2.2

[wasser]

Original k-r42 purchased from geekbuying your latest old/nw 1.2.2 everything works correctly including sleep but wifi won't turn on. version 1.21 wif works but sleep does not

please download 1.2.2 firmware from today and flash again. it should fix wifi issue

[wasser]

Hi wasser,
It's great that you have released your newest FW.
But situation with them crashes my brain entirely

1) I tried to flash my device with k-r42-new_revision-wasser-1.2.2 (suppposing I have new revision 2.1 board),
but have following:
-Eth - doesn't work(could not switch it on);
-wifi - doesn't work(could not switch it on).
-720p kernel(No 1080p???)

2) Flashed with k-r42-old_revision-wasser-1.2.2.
-Eth - works(but log shows me the same mistakes with RX packets), Speed Test crashes and causes reboot;
-wifi - doesn't work(could not switch it on).
-720p kernel(No 1080p???).

Do you have any idea, or I missed something important?

it seems you have the old revision board. so you should use the k-r42-old_revision-wasser-1.2.2.
There's a wifi regressison in 1.2.2 from yesterday. It's now fixed in 1.2.2 firmware from today. Please download it and flash again.

it's real 1080p kernel, the new kernel now just uses overlay which has great graphic performance and has self detection for the resolution 720p/1080p.

[lefizz]

Re: K-R42 firmware by wasser

I have the 2.1 board, I have flashed twice with the new revision firmware and always boot into cwm with these messages

Sent from my JY-G4 using Tapatalk 2

[wasser]

I have the 2.1 board, I have flashed twice with the new revision firmware and always boot into cwm with these messages

Sent from my JY-G4 using Tapatalk 2

just select "reboot system" to leave cwm.

[lefizz]

just select "reboot system" to leave cwm.

But there are error messages at the bottom. Anyway, it sit there for about 10 seconds before crashing out. It reboots to a black screen. Basiclly it doesnt work.

Weird, should i try the old revision firmware?

[Andre$]

just select "reboot system" to leave cwm.

I select "wipe cache partition" and after the device is booted normally. Right?

[no_spam_for_me]

But there are error messages at the bottom. Anyway, it sit there for about 10 seconds before crashing out. It reboots to a black screen. Basiclly it doesnt work.

Weird, should i try the old revision firmware?

With 1.2.1 I've exactly the same "error messages" and I do the "reboot system" and then I get the black screen too, BUT after some minutes, I've got the bootlogo and then the desktop...

[digger]

it seems you have the old revision board. so you should use the k-r42-old_revision-wasser-1.2.2.
There's a wifi regressison in 1.2.2 from yesterday. It's now fixed in 1.2.2 firmware from today. Please download it and flash again.

it's real 1080p kernel, the new kernel now just uses overlay which has great graphic performance and has self detection for the resolution 720p/1080p.

Hi wasser,
Have downloaded both your FWs (today Nov 17 version).
Tried to flash each of them.
But they behave with my device differently in compare to your version from yesterday.

I had Yesterday:
1) For k-r42-new_revision-wasser-1.2.2:
-Eth - doesn't work(could not switch it on);
-wifi - doesn't work(could not switch it on).
-720p kernel(No 1080p???)
2) For k-r42-old_revision-wasser-1.2.2:
-Eth - works(but log shows me the same mistakes with RX packets), Speed Test crashes and causes reboot;
-wifi - doesn't work(could not switch it on).
-720p kernel(No 1080p???).

I have Today:
1) For k-r42-new_revision-wasser-1.2.2:
-Eth - doesn't work(could not switch it on);
-wifi - works.
-720p kernel(Not 1080p kernel)
2) For k-r42-old_revision-wasser-1.2.2:
-Eth - works(but log shows me the same mistakes with RX packets), Speed Test doesn't crashes and doesn't causes reboot;
-wifi - works.
-720p kernel(Not 1080p kernel).

It is quite weird, isn't it?

I'm not able to obtain 1080p. I don't know why and what I have to do else so as to have it.
I couldn't take screenshots with AnTuTu information about GPU spatial resolution, because screenshot is cutting the image by some strange rison and capturing the central extra-zoomed part only. I have managed to take screenshots(extra-zoomed too) from Display Tester V.3.6.0. for both your today's firmwares. Here they are and they are identical with 720p:

[lefizz]

OK after deleting the cache partition and waiting for a 5 minute reboot it eventually went into android Yipee!!!

First things first this rom doesnt have XBMC installed, where can I first the right version for the RK3188??

Oh, and thanks for all the help. Much happier with my new purchase now, oh and ethernet is working which is great.

Thanks a lot

[wasser]

Hi wasser,
Have downloaded both your FWs (today Nov 17 version).
Tried to flash each of them.
But they behave with my device differently in compare to your version from yesterday.

I had Yesterday:
1) For k-r42-new_revision-wasser-1.2.2:
-Eth - doesn't work(could not switch it on);
-wifi - doesn't work(could not switch it on).
-720p kernel(No 1080p???)
2) For k-r42-old_revision-wasser-1.2.2:
-Eth - works(but log shows me the same mistakes with RX packets), Speed Test crashes and causes reboot;
-wifi - doesn't work(could not switch it on).
-720p kernel(No 1080p???).

I have Today:
1) For k-r42-new_revision-wasser-1.2.2:
-Eth - doesn't work(could not switch it on);
-wifi - works.
-720p kernel(Not 1080p kernel)
2) For k-r42-old_revision-wasser-1.2.2:
-Eth - works(but log shows me the same mistakes with RX packets), Speed Test doesn't crashes and doesn't causes reboot;
-wifi - works.
-720p kernel(Not 1080p kernel).

It is quite weird, isn't it?

I'm not able to obtain 1080p. I don't know why and what I have to do else so as to have it.
I couldn't take screenshots with AnTuTu information about GPU spatial resolution, because screenshot is cutting the image by some strange rison and capturing the central extra-zoomed part only. I have managed to take screenshots(extra-zoomed too) from Display Tester V.3.6.0. for both your today's firmwares. Here they are and they are identical with 720p:
[ATTACH=CONFIG]3997[/ATTACH][ATTACH=CONFIG]3998[/ATTACH]

the 1.2.2 firmware from today has a fix for wifi and it's expected that wifi works again in the 1.2.2 firmware from today. As i said before you have old revision board. Please use the old_revision firmware.

[wasser]

Hi wasser,
-Eth - works(but log shows me the same mistakes with RX packets), Speed Test doesn't crashes and doesn't causes reboot;

- could you please post the output of "ifconfig" which shows mistakes with RX packets and the dmesg log ?

thanks

[prism]

the 1.2.2 firmware from today has a fix for wifi and it's expected that wifi works again in the 1.2.2 firmware from today. As i said before you have old revision board. Please use the old_revision firmware.

@wasser
How can I tell if my CS918 board is old revision or new revision board? I am new here and just wanted to be sure before I flash your new firmware. Great works! keep it up!

[no_spam_for_me]

Just by disassembling device (open it) and have a look at the PCB (board)

http://www.freaktab.com/showthread.php?7369-Same-device-other-name-(AC8350-BX09)&p=102362&viewfull=1#post102362

[digger]

- could you please post the output of "ifconfig" which shows mistakes with RX packets and the dmesg log ?

thanks

wasser, as I informed you with my last post, it isn't possible to take full frame screenshot. So I have made this one:

[pes1313]

Just by disassembling device (open it) and have a look at the PCB (board)
http://www.freaktab.com/showthread.p...l=1#post102362

for me, only works well for the old firmware revisions , but I opened my k-r42, my revision of the board v2.1