NEOMODE HYBRID ROM 1.8 MK802IV UG007B CX-919 MK809III J22 and others with AP6210

[ulises1954]

Sorry to hear that you are having so many problems and setbacks to Fix and Finish the ROM

Hello Guys,

My MK802IV has left me :-(
This means I will Split my Rom in a Part.
Will make a Rom only for MK809III and a Rom for the other Devices.
The Update for the MK802IV must wait until I am able to get a new one.

Ray

Gesendet von meinem GT-I9305 mit Tapatalk 2

Hi again Neomode,


Sorry to hear that you are having so many problems and setbacks to Fix and Finish the ROM...


I wonder if you already have completed the upgrade for the CX-919 and other TV sticks, when do you plan to upload it, so we can all start testing how it works?


As Always, thanks again and again for all your efforts to make such an excelent ROM!!

[blinkone]

Hi again Neomode,

Sorry for the delay, but I forgot to mention that I am still having sporadic NAND Mount/UnMount problems when I unplug an USB memory in my CX-919.

In your post #103 you say that "The Nand Problem should be fixed":

http://www.freaktab.com/showthread.php?8391-NEOMODE-HYBRID-ROM-1-8-MK802IV-UG007B-CX-919-MK809III-J22-and-others-with-AP6210&p=116804&viewfull=1#post116804

With your 1.7 ROM, I was always having the "Automatically" NAND Mount/UnMount issue, about 10-15 times a day, without doing or connecting nothing...

Now with the 1.8 ROM, I only have noticed the problem every time unplug any USB Memory in my CX-919, so apparently something, at the USB Port could be triggering and Uninstalls the NAND Memory?...

Could only be me... But, Could you please check/verify, using any USB Memory stick, if this NAND problem is really fixed and does not show any more, before releasing the New ROM?


Looking forward to have your 1.8 ROM with fixes.

Hi there I get the NAND Mount/UnMount issue on my cx919 on finless 1.6b rom when I plug a usb mouse or key bored in to the unit..some times i can remount it by going into settings storage and remount nand but most the time I have to reboot the unit.

[meinbier]

Hy,
i´ve flashed last 1080 version on my MK809III.
Have problems with BT (its not working, but uninteresting for me), HDMI Pastrough and HW Decoding with SPMC didn´t work.
Is there a way to find a solution for it ?

Thanks
meinbier

[ulises1954]

Hi there I get the NAND Mount/UnMount issue on my cx919 on finless 1.6b rom when I plug a usb mouse or key bored in to the unit..some times i can remount it by going into settings storage and remount nand but most the time I have to reboot the unit.

Almost the Same was happening to me with my CX-919 using Neomode's 1.7 ROM... Fortunately, with the New 1.8 ROM apparently the problem is fixed, because now I only get sporadics NAND UnMount.


As I mentioned before, I always noticed the NAND UnMount issue on my CX-919 with Neomode 1.7 ROM (never had used the Finless 1.6b), when I plug a usb memory stick, mouse or keyboard into the USB Port.. However, I was able to fixed it, by going into settings and remounting the NAND again... But I never had to reboot my CX-919.


However the bigest problem that I had with Neomode's 1.7 ROM, was that I was always having an "Automatically" NAND UnMount about 10-15 times a day, without doing or connecting nothing!...


With the Neomode 1.8 ROM, everything works better now, and this NAND problem is almost gone... As I say before, something at the USB Port could be triggering something and then Uninstalls the NAND Memory?

[apez]

Hy,
i´ve flashed last 1080 version on my MK809III.
Have problems with BT (its not working, but uninteresting for me), HDMI Pastrough and HW Decoding with SPMC didn´t work.
Is there a way to find a solution for it ?

Thanks
meinbier

Hi, I cannot install the 1.8 into my MK809III, with all cutoms roms I've problem with 1080p , when I set any 1080p mode screen is flickering.

Could you please refer me your installation procedure for 1.8 ?
Thanks in advance

[neomode]

AW: NEOMODE HYBRID ROM 1.8 MK802IV UG007B CX-919 MK809III J22 and others with AP6210

As I write in an early Post. The 1.8 Rom is not Working on the MK809III.
I make a Rom only for this Devices.

Neomode

Gesendet von meinem GT-I9305 mit Tapatalk 2

[apez]

As I write in an early Post. The 1.8 Rom is not Working on the MK809III.
I make a Rom only for this Devices.

Neomode

Gesendet von meinem GT-I9305 mit Tapatalk 2

Thanks for your confirmation, the problem is also 1.7 is not working for me.. could you please kindly suggest me a complete guide to install it into device? Other question, please, any customs roms that I install into my MK809III if I put 1080P resolution (50 or 60 frame ) I've problem of flickering screen = the screen every some time ( 1-2 minutes go black , then come back ), could be a graphics card problem or is simlpy the roms no 1080P ?

Many thanks for your patience.
Francesco

[neomode]

AW: NEOMODE HYBRID ROM 1.8 MK802IV UG007B CX-919 MK809III J22 and others with AP6210

Right now i making a Rom only for the MK809III. Will release it this Week.

Neomode

Gesendet von meinem GT-I9305 mit Tapatalk 2

[Bertin]

Right now i making a Rom only for the MK809III. Will release it this Week.

Neomode

Gesendet von meinem GT-I9305 mit Tapatalk 2

Just to identify a solution for my new MK802 IV AP6210:

As I understood, the release 1.8 has no problems at all in the 720p variant.
If so, by now I would be satisfied using that one, waiting for a stable 1080 version.

Is it correct?

[basmand]

Right now i making a Rom only for the MK809III. Will release it this Week.

Neomode

Gesendet von meinem GT-I9305 mit Tapatalk 2

Hi

Do I understand this correct, that I will not be able to use your new MK89III hybrid ROM on my MK802IV stick??

Basmand

[neomode]

Yes and no. The New MK809III Version 3 did not Run right with a MK802IV Rom.

Neomode

[apez]

Yes and no. The New MK809III Version 3 did not Run right with a MK802IV Rom.

Neomode

Dear Neomode how can I check my 809III stick version?

[neomode]

AW: NEOMODE HYBRID ROM 1.8 MK802IV UG007B CX-919 MK809III J22 and others with AP6210

I have all Versions of this Sick and I have not really found something on it to check.
But a Rom for Version 3 run also on Version 2.

Neomode

Gesendet von meinem GT-I9305 mit Tapatalk 2

[basmand]

Yes and no. The New MK809III Version 3 did not Run right with a MK802IV Rom.

Neomode

HI

Thanks for your answer that I am sorry to hear, be course your first version of 1.8 worked fine on my MK802IV except Bluetooth turn on/of button

Basmand

[neomode]

AW: NEOMODE HYBRID ROM 1.8 MK802IV UG007B CX-919 MK809III J22 and others with AP6210

No worry. This means not that the MK802 IV became no Update, I will only seperate the MK809III from the Hybrid Rom.

Neomode

Gesendet von meinem GT-I9305 mit Tapatalk 2