NEOMODE CUSTOM ROM MK809III AP6210 Version 1.9a *UPDATE*

[littlecesare]

Neomode,
First of all thank you for your great job.
I'm testing my mk809iii with your rom in and it is reborn.
Just two questions.
May be possible to add a 4:3 form factor for video output (1280*1024 could be enough)?
and,
I don't see 32Gb of internal SD card, just 4Gb. May it depends from the rom/kernel or my mk's memory has gone? (now I'm working with it, and I cannot flash again)
Thanks and keep going!

[Magnus33]

Please try this Automatic Driver Installer.

http://www.freak-tab.de/neomode/rkautodriver.zip

Neomode

That makes things easy

[massmax45]

R: NEOMODE CUSTOM ROM MK809III AP6210 Version 1.9a *UPDATE*

That makes things easy

Don't work to me, neither single driver installation as your suggestion... sic!

[Magnus33]

Don't work to me, neither single driver installation as your suggestion... sic!

Reboot with driver signature verification turned off.

Open device manger.

Plug usb cable for the MK device into pc.

The hold button in the small hole on the side down with paper clip or the like.

Well doing so plug cable into the side with the sd card slot.

Once the yellow question make for unknow device shows up in device manger double click on it and install driver.
Browse to where the driver is in the rom download and your done.

The old fashined way to install a driver for a unknow device but it still works.

[Hetauma]

kernels?

can some1 please tell me what are the differences between the 4 kernels?
kernel
kernel1
kernel2
kernel3

thanx in advance

[imaddiced2u]

Naw reboot the pc and go into the same area you chose for selecting safe mode.
Instead select turn off driver signature .

This happens in some versions of windows because the driver is not signed.

Then you can go into device manger and select the driver when the yellow question mark shows up doing the push button plug in part.

fortunaly you only have to do this once.

Thanks Magnus33,
I tried this again this morning. I don't think the button was making. I took the cover off and held the switch on. Boom it was detected and I installed the driver without any trouble.
Thanks for the help!

[ulises1954]

can some1 please tell me what are the differences between the 4 kernels?
kernel
kernel1
kernel2
kernel3

thanx in advance

Neomode Can explain you better, but he already said in another post that:

Kernel is the Normal 720p Kernel.

Kernel1 and Kernels2 are Overclocked 720p Kernels.

Kernel3 is the 1080p Kernel.

I am using the Kernel2 with my CX-919 and all works flawlessly!!

[Magnus33]

Thanks Magnus33,
I tried this again this morning. I don't think the button was making. I took the cover off and held the switch on. Boom it was detected and I installed the driver without any trouble.
Thanks for the help!

That tiny little hidden switch isn't the greatest decision they ever made.
Glad you got it going enjoy your new rom

[imaddiced2u]

That tiny little hidden switch isn't the greatest decision they ever made.
Glad you got it going enjoy your new rom

Installed the firmware in the first of my two units. All I can say is wow, what a difference from stock.
Thanks to Neo for this work of art! Thanks again Magnus33 for getting me connected to the MK809III.

[Magnus33]

Installed the firmware in the first of my two units. All I can say is wow, what a difference from stock.
Thanks to Neo for this work of art! Thanks again Magnus33 for getting me connected to the MK809III.

Like going from the family minivan to a sports car isn't it.

Your welcome

[babnik80]

Mk802iv + sam's kernel

I tried it with every Sam's kernel and I only get the spinning circle and then reboots. Any ideas?

[imaddiced2u]

Like going from the family minivan to a sports car isn't it.

Your welcome

Vroom, Vroom, Vroom

[spideymon]

... so think I also will go back to the 1.8 ROM, until all these little problems are corrected.

Where can I get the 1.8 ROM ? I have a CX-919 as well and the links were removed. Seems that the 1.8 works for us (from what I uave read and the BT issue), but I wasnt quick enough to grab it....

Thanks

[spideymon]

Neomode Can explain you better, but he already said in another post that:

Kernel is the Normal 720p Kernel.

Kernel1 and Kernels2 are Overclocked 720p Kernels.

Kernel3 is the 1080p Kernel.

I am using the Kernel2 with my CX-919 and all works flawlessly!!

So is netflix, XBMC, etc working now with Kernel2? I havent tried it yet...

[nefas]

cpu/gpu limitations

Greetings, dear Neomode!

Really appreciate your job! Keep going! If I had money, I would donate it to support your deeds ))
For now I can support you only with the kind words.

I have some concerns regarding this update. Could you please add the kernel the standard CPU frequencies 312-1608Mhz and remove the cpu_minfreq and max_freq limitations. Also please, take a look at /mali400_utility/param. I saw some duplicates there. Is it in use, btw, or deprecated? In any case 533Mhz will greatly improve performance, and will not add too much heat. And the last one - I hear a strange poking sound from speakers time-to-time on the both MK809IIIs I flashed. Is it normal? A kinda reminder? )

Thank you much anyway!