Kitkat Kernels for All (well most!)

[d33]

No problem and I understand all the importance, I'll wait
Just let me know when you are ready.

Is this latest tester more stable? Does it boot every time?

[digger]

Is this latest tester more stable? Does it boot every time?

If you mean this last v4064, it boots up significantly better.
I have tried to reboot it for ten times and it always starts from the first attempt.
Better performance if we speak about "your stock" clock settings(heven't check them).
Tried to play my movies via net(with external LAN to USB adapter), nothing bad was noticed.
What was noticed is there is no on-screen keyboard, had to use hardware one and something wrong with sleeping mode. Device goes to sleep when I press Power button, but when I press it again, it can wake up or switch Off.
Edit: Sorry, it were my stupid words about keyboard, have just noticed changes in settings

[bibuba]

CYX_809III_RK3188-T and MT6622N with ESP8089

test v4064

tested with NCR 3.1 KK, bootloop at ugoos logo.

Also tested version 4055, boot ok but flickers a lot, pointer and system are laggy, no wifi/bt.

Cheers!

[d33]

tested with NCR 3.1 KK, bootloop at ugoos logo.

Also tested version 4055, boot ok but flickers a lot, pointer and system are laggy, no wifi/bt.

Cheers!

Neomode's ROM is based on beta source and not compatible with the latest release of source code I'm using (April 2014 ->)

Series 2.x/3.x work with beta source ROMs

[alan.w]

rk3188-t -> 1,6 no bootproblem.
antutu ~18250

is it posible to get more? i have a big cooler...

Old kernel http://www.freak-tab.de/d33/kernel_AP6210_v4026.zip give results ~20350 antutu
But wifi and bluetooth do not work on Cozyswan S400

[d33]

Version 4.1

• TV Boxes - RK1000 support (Audio codec & TV out) / Dual lcdc
• TV Sticks - No codec / Single lcdc
• HD resolution (1920x1080)
• SD resolution (1280x720)
• Single kernel for all SOCs (this is overclock for RK3188T)
• CPU: 1.6 GHZ, GPU: 600 MHz, DDR: 720 MHz
• Increased stability over v4.0

TV Box pack (AP6210/AP6330/RTL8188 (VMAC/EXT)/MT7601)
TV Stick pack (AP6210/AP6210-alt/AP6330)

[digger]

Version 4.1

• TV Boxes - RK1000 support (Audio codec & TV out) / Dual lcdc
• TV Sticks - No codec / Single lcdc
• HD resolution (1920x1080)
• SD resolution (1280x720)
• Single kernel for all SOCs (this is overclock for RK3188T)
• CPU: 1.6 GHZ, GPU: 600 MHz, DDR: 720 MHz
• Increased stability over v4.0

TV Box pack (AP6210/AP6330/RTL8188 (VMAC/PLL)/MT7601)
TV Stick pack (AP6210/AP6210-alt/AP6330)

Great! Newest release!
Have just tried kernel_v4.1_TVBOX_RTL8188PLL_HD from TV Box pack.
Sorry, but doesn't boot

[d33]

Great! Newest release!
Have just tried kernel_v4.1_TVBOX_RTL8188PLL_HD from TV Box pack.
Sorry, but doesn't boot

I couldn't remember if the config was PLL or EXT. I'll build one with EXT now.

[d33]

Re-Download from #921

[digger]

v4.10 RTL8188-EXT

Thanks, d33
Tried this:
-Boots;
-An old issue with booting from the first time(takes 2-5 attempts);
-There is no wifi(cannot switch it on);
-LAN-O.K.
-Short list of sound devices(there is no SPDIF feature);
-Couldn't see AV out;
-Problem with waking up.
I'm going on the test and will inform some additional details.

[d33]

Thanks, d33
Tried this:
-Boots;
-An old issue with booting from the first time(takes 2-5 attempts);
-There is no wifi(cannot switch it on);
-LAN-O.K.
-Short list of sound devices(there is no SPDIF feature);
-Couldn't see AV out;
-Problem with waking up.
I'm going on the test and will inform some additional details.

I've fixed the wifi - please re-download in a minute.

Dont get why the AP6210 version boots every time for you but the RTL8188 wifi boot every 2-5 times

[yoni03]

doesn't work

it's just drive me crazy...

cs968 rk3188 ap6210 DOESN'T Work...

smetimes it start with blak background and sometimes with good background However,the remote not working and itkeep reboot every 10 seconds....

what'swrong with this guy?!?!?!?

I jus wanna edit my dumped kernel and modify the clock settings...

[digger]

I've fixed the wifi - please re-download in a minute.

Dont get why the AP6210 version boots every time for you but the RTL8188 wifi boot every 2-5 times

Do I have to use the same link from post#924?
404 Not Found
Edited: #925 to #924

[d33]

it's just drive me crazy...

cs968 rk3188 ap6210 DOESN'T Work...

smetimes it start with blak background and sometimes with good background However,the remote not working and itkeep reboot every 10 seconds....

what'swrong with this guy?!?!?!?

I jus wanna edit my dumped kernel and modify the clock settings...

If your TV Box (CS968) has a 'T' CPU you can't edit the clock settings, they are dynamically locked. My kernels have these locks overridden but the only way to boot is a combination of USB power and normal power supply (as discovered by JDfense).

[yever]

works well on my MK908II. No boot problem anymore. Camera is still too dark. I need some time to check if the it can wake up properly and let TV to re-sync with HDMI.