Cube Talk 9x U65GT ROM based on Cube's V 1.8 firmware of 4 July 2014

[SamosCOC]

For information, I use this UC Adaptor and it works very well.

[hawky]

Hey, wich one ?

[otto8]

This 22AWG cable should do the charging job:

http://www.aliexpress.com/item/Free-Shipping-10PCS-High-Quality-Original-22awg-overstretches-tinned-flat-copper-micro-usb-data-cable-charge/1707057614.html

It loads up to 3 Ampere charging current!! I think it's for data transmission, too.

Just ordered 10 cables for 29$ including shipping :-)

[jherraizm]

You can root talk 9X with the original recovery,no need PC,no need driver.

download file "root_talk9x.rar",
http://www.4shared.com/rar/p9jdW35Xba/root_talk9x.html

extract, and place the update.zip at sdcard(internalSD),then follow this.

I've tried it twice, something seems to install, reboot, turn on ... but the tablet does not have root permissions and I see no application of SuperSU style. I have the original firmware cube of 03 septembre time and desire only to obtain root permissions. Nor do I have any installed CWM recovery type.
Thanks in advance!

[giouncino]

This 22AWG cable should do the charging job:

http://www.aliexpress.com/item/Free-Shipping-10PCS-High-Quality-Original-22awg-overstretches-tinned-flat-copper-micro-usb-data-cable-charge/1707057614.html

It loads up to 3 Ampere charging current!! I think it's for data transmission, too.

Just ordered 10 cables for 29$ including shipping :-)

this is good.
it has 28AWG for data and 22AWG for charging. A little bit better than the stock (24 and 28 AWG)

[hairydog]

This 22AWG cable should do the charging job:

http://www.aliexpress.com/item/Free-Shipping-10PCS-High-Quality-Original-22awg-overstretches-tinned-flat-copper-micro-usb-data-cable-charge/1707057614.html

Just ordered 10 cables for 29$ including shipping :-)

You were lucky. I put that item into the basket, which immediately triggered a price increase to almost twice as much. An alert at the top of the basket and an email saying "The seller has adjusted the price for Order No. nnnnnnn. Please check the order detail or contact the seller directly before paying the order."

So I tried again, twice. All three times, the advertised price was $29 on the page, then half way through checkout it went up a lot.

So I've ordered a similar product from elsewhere. Not cheaper, but at least not dishonest, and it won't arrive on the slow boat from China.

[BamaPanda]

Newegg price

These are high. This is the lowest priced I have found for a single.

http://www.newegg.com/Product/Product.aspx?Item=N82E16812189234

Edit: Just looked closer. 2 for 7.62 shipped.

Edit 2: Just bought two!

[algara]

You can delete china app by original recovery, no need root , noneed PC ,no need driver.

download file "delete_china_app.rar",
http://www.4shared.com/rar/bB5LqEYzba/delete_china_app.html

extract, and place the update.zip at sdcard(internalSD),then follow this.

Hi there. Here a new Cube Talk 9x owner, utterly happy with the device. I had a pretty nasty experience with my previous Onda v972: unstable, freezing at all times, stock rom like a nightmare, myriad flashings with new roms (that I never performed as I consider myself very far from being skillfull at techs), etc . It never worked well.

However, this Cube is a complete different thing. It runs smooth (so far), no significant lags, ..........Very happy, as I say.

I'd just like to remove all chinese apps, but without rooting and flashing. I tried this easy way of doing it (Thx mmrrdd) but I didn't succeed. It worked fine for the Chrome and screeen brightness fix. But not for the chinese apps.

Could the file be faulty or might there be something i'm not doing right?

Thanks in advance.

Edit: I forgot to say; my Cube is v1.8 - 20140806.

[mmrrdd]

I'd just like to remove all chinese apps, but without rooting and flashing. I tried this easy way of doing it (Thx mmrrdd) but I didn't succeed. It worked fine for the Chrome and screeen brightness fix. But not for the chinese apps.

Could the file be faulty or might there be something i'm not doing right?

Thanks in advance.

Edit: I forgot to say; my Cube is v1.8 - 20140806.

To do factory reset again after install update.zip.

[algara]

To do factory reset again after install update.zip.

OK, I'll try it.

Thank you.

[tomazf8]

replaced libmali.so and tablet stops at logo

Bought my Cube 9x tablet, replaced libMali.so, rebooted and the tablet stayed at logo. animation is not runnig and cant enter adb. please help.

[900supersport]

If you do not have a custom recovery then you probably need to flash a rom from windows using spflashtool.

[tomazf8]

found it. but don't know how to go to download mode. can you help?

[900supersport]

Tablet just needs to be off. If its on hold power for 10 seconds to force it off.

[tomazf8]

tnx. found that too. i am in download mode, have sp flashing tool, but it seems my com do not find my tablet. is there any indicator to be shown the tool has found the tablet? any drivers?

do not have a copy of my original rom. do i need to flash your custom rom?

i think it is good to flash TWRP. Do i need to flash that first?

hot to actually use flash tool?