Lollipop - Wasser Firmware for Beelink R89

[amclean123]

hopefully you can check it out....
i'm fully aware of the mentioned suggestions, but it puts it on standby mode instead of turning it off.... truly appreciate the reply bro...

I was able to recreate the same power/standby issue you are having on my beelink but unfortunately do not have any suggestions on how to fix it.

[wasser]

Hi Wasser,

Thank you for your support on the firmware.

My device:
Beelink R89 2G/16G
PCB ver 3.0
1080P@60Hz
Gigabit Ethernet
FW 3.0.1

I have tested Youtube 1080p60hz. It is fine.
But I notice that the TV box will be freeze with red LED light after power off. (The first option in the power menu)
It cannot be powered on unless keep pressing the TV box power button for a few second to power off and then on again.

Regards,
Sintest

it's already fixed. It will be included in 3.0.2 release

[wasser]

Hi all, lollipop wasser firmware version 3.0.2 s released. For more infos, please take a look at the first post.

Enjoy and don't forget to post feedbacks


Wasser

[andreyh]

Hi all, lollipop wasser firmware version 3.0.2 s released. For more infos, please take a look at the first post.

Hi Wasser!

Do you plan to add a support for rkRemoteContol to lollipop firmware?

[marcelomelo]

Hi Wasser!
Does 3.0.2 play hd audio like openour firmware?

[amclean123]

Hi all, lollipop wasser firmware version 3.0.2 s released. For more infos, please take a look at the first post.

Enjoy and don't forget to post feedbacks


Wasser

Edit:
After doing more testing both rk-kodiapp-15.2-lollipop.apk and wasser-kodi-15.2rc2.apk seem to behave the same on 3.0.2 as they did on 3.01. rk-kodiapp-15.2-lollipop.apk still generates audio artifacts during passthrough with the RK Codec.

[psycmos]

Hi all, lollipop wasser firmware version 3.0.2 s released. For more infos, please take a look at the first post.

Enjoy and don't forget to post feedbacks


Wasser

Great news! i will test it at night!

[dimkin]

Hi all, lollipop wasser firmware version 3.0.2 s released. For more infos, please take a look at the first post.

Enjoy and don't forget to post feedbacks


Wasser

Any chance to get ace-player work?

[amclean123]

Any chance to get ace-player work?

I can test Ace in a couple of hours.

Edit: I don't see Ace on Google Play any longer. If you can post a link to the APK I can test it.

[andreyh]

I don't see Ace on Google Play any longer. If you can post a link to the APK I can test it.

Sure. Here it is:

http://dl.acestream.org/products/acestream-full/android/latest

[amclean123]

Sure. Here it is:
http://dl.acestream.org/products/ace...android/latest

Thanks! Unfortunately I could not get Ace Player to work. I could get it to output audio but never any video. I tried changing lots of the acceleration settings and output to Open GLS. That didn't help.

[bluesmanuk]

I found some regression with 3.0.2

When using rk-kodiapp-15.2-lollipop, many videos would play with no video but audio only and some with neither.

With wasser-kodi-15.2rc2 things were better and everything played very well indeed using both SPDIF and HDMI passthrough, although I do tend to notice a little crackle at the start of playback with Dolby files.

I have found that Youtube at 1080p has more micros stutters again.

There are also more general continual micro stutters with MX Player although audio passthrough is perfect.

I noted that when connect to PC is selected in settings, it doesn't retain it after a reboot.

I am also using a new 64Gb NTFS flash drive, which is shown as having 0 bytes storage in storage settings and not picked up at all by ES File explorer but can be seen by Kodi.

The power off issues reported by others is resolved.

[BTR11]

I found some regression with 3.0.2


I noted that when connect to PC is selected in settings, it doesn't retain it after a reboot.

This is not a bug, this is the correct way as the usb-otg port must to work, which it´s particularly important on R-89 box to can attach to this port any air mouse/ touch pad-keyboard with usb connectors and get the proper performance from the mouse to avoid "lagged" movements and the repeating characters bug noticed on R-89 always when the air mouse is not attached to the Otg port. The same apply for other usb game controllers.

The opposite it´s the bug, when after a reboot "connect to PC" is always "on" or selected; so in this release that was corrected which it´s Ok.

[bluesmanuk]

This is not a bug, this is the correct way as the usb-otg port must to work, which it´s particularly important on R-89 box to can attach to this port any air mouse/ touch pad-keyboard with usb connectors and get the proper performance from the mouse to avoid "lagged" movements and the repeating characters bug noticed on R-89 always when the air mouse is not attached to the Otg port. The same apply for other usb game controllers.

The opposite it´s the bug, when after a reboot "connect to PC" is always "on" or selected; so in this release that was corrected which it´s Ok.

Thanks, I was not aware of this being an issue.

I turned it on and connected a Logitech K400R and suffered no issues with lag or repeating characters.

So maybe it's something more exclusive to the R89.

[scooter2014]

Wasser needs title updated to ROM GOD. 😆