Modded ROM's for Tronsmart R68 "Tronsplant your ROM"

[mastro7712]

You can fix the MAC address with this tool:

https://mega.nz/#!7p0jlKDC!CRV8zYNZ5y12lU1rxkPMV9Vcd-qcLM3465prlCtRnDc

and so you can set fix IP address for the wifi too, even if you use DHCP as well. In thi later case the DHCP server shoud be set to aasign the same IP to this device.
The MAC fix should be set for both ethernet and wifi. Read funcion probably will not give you any response, just after you have a valid number stored previously.
Otherwise, this situation with your box is completely strange, and noone else have experienced such behavior yet.

How should I use this tool !?

[mastro7712]

You can fix the MAC address with this tool:

https://mega.nz/#!7p0jlKDC!CRV8zYNZ5y12lU1rxkPMV9Vcd-qcLM3465prlCtRnDc

and so you can set fix IP address for the wifi too, even if you use DHCP as well. In thi later case the DHCP server shoud be set to aasign the same IP to this device.
The MAC fix should be set for both ethernet and wifi. Read funcion probably will not give you any response, just after you have a valid number stored previously.
Otherwise, this situation with your box is completely strange, and noone else have experienced such behavior yet.

Look at the pictures .... this is the address that changes when I connect hotspot of mobile phone and that gives me the error !!!! the MAC address of the Ethernet card and that the card does not change WIFI !!!! It is absurd this situation !! and in addition this address changes each time you reboot or shutdown drl box !!!! I do not know what to do....

[l30ns]

Hi everyone,
anyone still here?
I would like some people to test this new release, v9-4+ includes kernel.

Hi, lonix
The 9-4+ works nicely with no bugs so far (been using it for 3 days already). It seams a bit snappier too. Thanks for the job done!
Just wondering --> Have you discarded the idea to make the kernel auto-detect both BT, 2,4G &5G Wifi on Tronsmart R68.
9-4+ no longer auto-detects wifi+BT of any sort and one needs to revert to file replacing fix to get them running again.

P.S. Do I lose all your kernel optimizations if I flash Resources image from the original firmware? Is there any other simple way to get 5G running without missing out on your Kernel goodies?

[lonix]

5g on beelink is probably something I can only solve with access to the hardware.

The beelink resource.img is probably not compatible with my kernel, different revision, I am actually using a marshmallow kernel source.

I did have wifi and Bluetooth working in a previous version but it seems that i broke it with my updates.

Try this version, https://mega.nz/#!CM4zzKLa!nP4tlsWvb...P3fYFLVbRQ8m6c

Sorry no 5g yet

[Stzo]

How should I use this tool !?

Start it, and you'll see everything. Connect the box the same way as you connect when downloading the ROM, enter the requested MAC address separated with ':' sign, and press write. You'll get a confirmation message if it was successful. After this process you probbaly need to connect again, and you can read-out the written values. LAN and WIFI both have their own MAC addresses, you need to write them separately. Since that time, until you download a full ROM again, these values will be fixed.

[Stzo]

Look at the pictures .... this is the address that changes when I connect hotspot of mobile phone and that gives me the error !!!! the MAC address of the Ethernet card and that the card does not change WIFI !!!! It is absurd this situation !! and in addition this address changes each time you reboot or shutdown drl box !!!! I do not know what to do....

These photos are so small, that I cannot read them, unfortunately.

[[email protected]]

Hi everyone,

anyone still here?

I would like some people to test this new release, v9-4+ includes kernel.

Changes:

- Based on Zidoo 1.0.38
- New Activation patch thanks STZO.
- many kernel fixes, too many to post here.
- removed most unnecessary apps and bloat.

Install using TWRP over previous release v8-3 or above, Full ROM Available Here

Known Bugs:

- ZDMC may not play video correctly unless you disable rockchip acceleration.
- Please report your findings.
- If you continue to have problems with ZDMC you can revert to the previous version available here

Hi Lonix,

Can I flash my Z68 with your new ROM V9-4 with kernel? or do I need to replace with the original Kernel from Z68 stock ROM afterward for the remote control to work correctly?

Thank you for your help and times.

KN

[clarkss12]

Hi Lonix,

Can I flash my Z68 with your new ROM V9-4 with kernel? or do I need to replace with the original Kernel from Z68 stock ROM afterward for the remote control to work correctly?

Thank you for your help and times.

KN

Yes, same question here. I have to use my stock resource and kernel images for these roms to work on my R68 non-gigabit version box.

[lonix]

Hi Lonix,

Can I flash my Z68 with your new ROM V9-4 with kernel? or do I need to replace with the original Kernel from Z68 stock ROM afterward for the remote control to work correctly?

Thank you for your help and times.

KN

I'm not sure if the tronsmart kernel will even boot the z68 so it's a good idea to flash the z68 kernel and resource.

If you are using the TWRP zip file you can replace the kernel.img and resource.img with 7zip or another archiver and then flash to your device

[[email protected]]

I'm not sure if the tronsmart kernel will even boot the z68 so it's a good idea to flash the z68 kernel and resource.

If you are using the TWRP zip file you can replace the kernel.img and resource.img with 7zip or another archiver and then flash to your device

Hi Lonix,

I got it and thank you for your times

KN

[RedHawk]

https://mega.nz/#!zEgQnRiZ!UO1eERyDb...szSeSw_MiutGrE

Here is the original.

Try restoring this first, should stop the messages

I have write FullRom 9.4 but the "illegal activation" error ( the same of mastro7712) hasn't gone away.
Also notice that with 9.4 there isn't TWRP as recovery.

[palimpodio]

Hi Lonix,

I got it and thank you for your times

KN

Hi. I really need something like that, because of the CONFIG_IP_MULTICAST feature, but I'm not sure how to do it. If you finally succeeded with the procedure, would you please show me the steps?. As you all can see, I'm not precisely an expert...

[palimpodio]

Hi lonix. I've seen that you've enabled CONFIG_IP_MULTICAST in your v9 Rev2, which is something I've been hoping to find for my NexBox. Unfortunately, none of the otherwise useful and well worked roms related in the Nexbox forum seem to have UDP multicast enabled. So I think I'm going to give a try to yours. In that case, should I just install your full rom or what?
Thanks!

[tommeletbone]

9.4 TWRP is missing

[lonix]

Hi lonix. I've seen that you've enabled CONFIG_IP_MULTICAST in your v9 Rev2, which is something I've been hoping to find for my NexBox. Unfortunately, none of the otherwise useful and well worked roms related in the Nexbox forum seem to have UDP multicast enabled. So I think I'm going to give a try to yours. In that case, should I just install your full rom or what?
Thanks!

You can try the full ROM, no guarantees it will work properly on nexbox

9.4 TWRP is missing

Thanks for letting me know.