Announcement

Collapse
No announcement yet.

Announcement

Collapse
No announcement yet.

LibreELEC & OpenELEC for Tronsmart Vega S95

Collapse
This is a sticky topic.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Originally posted by e123enitan View Post



    I would like to reflash, I do have USB2USB, so where do I find the image to reflash s905-META and instructions.
    Thanks
    At the Tronsmart forum has all the links to the files and instructions for updating the firmware via USB cable.

    Comment


      I installed the LibreElec version on an extra SDCard, it works perfectly!! Thank you for all your effort.

      Now with the extra card, I can even switch between OE with Kodi 16 en LE with Kodi 17

      Comment


        Hi again.

        I have some subtitle issues with the current Kodi 17 version in te LibreElec installation. I cannot move the subtitles on the screen up or down.
        How can I replace the Kodi version in the LibreElec version? Or can you provide an update?

        I tried a development build from the Kodi website on my Android in Tronsmart Vega S95 and with that Kodi I can move the subtitles again.
        The version I tried was kodi-20170119-53a5c83-Krypton-armeabi-v7a

        Comment


          Originally posted by 62vette View Post
          Hi again.

          I have some subtitle issues with the current Kodi 17 version in te LibreElec installation. I cannot move the subtitles on the screen up or down.
          How can I replace the Kodi version in the LibreElec version? Or can you provide an update?

          I tried a development build from the Kodi website on my Android in Tronsmart Vega S95 and with that Kodi I can move the subtitles again.
          The version I tried was kodi-20170119-53a5c83-Krypton-armeabi-v7a
          It is desirable to provide a link to the file and the steps You did. I think it will helpful for other users.

          Comment


            Originally posted by balbes150 View Post

            It is desirable to provide a link to the file and the steps You did. I think it will helpful for other users.
            Hi

            I think you misunderstood my question.
            I did not replace the Kodi version with the version I mentioned above.

            I want to know how to do this or if you can provide an updated image.

            Thanks
            Henk

            Comment


              Originally posted by 62vette View Post

              Hi

              I think you misunderstood my question.
              I did not replace the Kodi version with the version I mentioned above.

              I want to know how to do this or if you can provide an updated image.

              Thanks
              Henk

              You can use images collected by Kszaq (8.0 and 7.0). The latest versions have all the necessary support for model Tronsmart.

              Comment


                Thanks, I will give it a try and will reply my results.

                Comment


                  Originally posted by hscotty55 View Post
                  To do a clean install using SD card/USB drive*and then transfer Libreelec*internal memory: 1. Download file with*img.gz*extension from -> https://yadi.sk/d/srrtn6kpnsKz2/Libreelec . Select the version of Libreelec you want to install. 2. Download the LibreELEC USB-SD Creator -> https://wiki.libreelec.tv/index.php?...USB-SD_Creator 3.*Get a SD card or USB*stick and format it*FAT 32. 4. Insert SD card or USB stick into your computer. 5. Open LibreELEC USB-SD Creator you downloaded from step 2. 6. In the *LibreELEC USB-SD Creator skip the YELLOW number 1 step. Go to the*PINK number 2 step. 7. Click SELECT FILE and navigate to where you downloaded you Libreelec.img.gz file from step 1. 8. In the LibreELEC USB-SD Creator on the BLUE number 3 step select your SD card or USB stick drive. 9. In the LibreELEC USB-SD Creator on the GREEN number 4 step click Write. 10. Once the image finishes writing to the USB stick or SD card click the*CLOSE button to exit the LibreELEC USB-SD Creator. If you see an immediate "Write error" please check the write-protect tab on the SD card. This puts the card into read-only mode and writing will fail. 11. Eject your SD card or USB stick from your computer and insert it into your Tronsmart. Use the toothpick method to boot your Tronsmart. If it just keeps cycling back to the Tronsmart logo and will not boot into Libreelec, unplug your Tronsmart and plug it back in WITHOUT using the toothpick method and it should boot into Libreelec. 12. Verify Libreelec runs correctly from the SD card or USB stick and shutdown your Tronsmart. 13. Take the SD card or USB stick out of your Tronsmart and insert it back into your computer. 14. Navigate to your SD card or USB stick drive on your computer. 15. Look for the file called "install.sh" and rename it to "install.aml" 16. Eject your SD card or USB stick from your computer. 17. Insert your SD card or USB stick back into your Tronsmart and power your Tronsmart on. 18. Wait about 20 seconds and Libreelec files will start copy to your internal memory of your Tronsmart. Process takes about 1 minute to complete. 19. Once install to internal memory is complete, you will have to install all add-ons as your cache and userdata will be wiped.
                  I've followed this instruction and successfully transferred LibreElec 8.0 to internal memory. Thanks.

                  This package in the link is dated Dec 2016. There is newer version of LibreElec by kszaq. Is there any instruction on how to update to the latest by kszaq?

                  Thanks

                  Comment


                    Just a realignment of the instructions to flash into Internal memory from this post ``Originally posted by hscotty55 View Post``


                    To do a clean install using SD card/USB drive*and then transfer Libreelec*internal memory:

                    1. Download file with*img.gz*extension from -> https://yadi.sk/d/srrtn6kpnsKz2/Libreelec .
                    Select the version of Libreelec (directory "7.0.3.11_test") you want to install.

                    2. Download the LibreELEC USB-SD Creator -> https://wiki.libreelec.tv/index.php?...USB-SD_Creator

                    3.*Get a SD card or USB*stick and format it*FAT 32.

                    4. Insert SD card or USB stick into your computer.

                    5. Open LibreELEC USB-SD Creator you downloaded from step 2.

                    6. In the *LibreELEC USB-SD Creator skip the YELLOW number 1 step. Go to the*PINK number 2 step.

                    7. Click SELECT FILE and navigate to where you downloaded you Libreelec.img.gz file from step 1.

                    8. In the LibreELEC USB-SD Creator on the BLUE number 3 step select your SD card or USB stick drive.

                    9. In the LibreELEC USB-SD Creator on the GREEN number 4 step click Write.

                    10. Once the image finishes writing to the USB stick or SD card click the* CLOSE button to exit the LibreELEC USB-SD Creator.
                    -If you see an immediate "Write error" please check the write-protect tab on the SD card this puts the card into read-only mode and writing will fail.

                    11. Eject your SD card or USB stick from your computer and insert it into your Tronsmart. Use the toothpick method to boot your Tronsmart.
                    -If it just keeps cycling back to the Tronsmart logo and will not boot into Libreelec, unplug your Tronsmart and plug it back in WITHOUT
                    -using the toothpick method and it should boot into Libreelec.

                    12. Verify Libreelec runs correctly from the SD card or USB stick and shut down your Tronsmart.

                    13. Take the SD card or USB stick out of your Tronsmart and insert it back into your computer.

                    14. Navigate to your SD card or USB stick drive on your computer.

                    15. Look for the file called "install.sh" and rename it to "install.aml" (Note the install.sh is currently available for directory "7.0.3.11_test")

                    16. Eject your SD card or USB stick from your computer.

                    17. Insert your SD card or USB stick back into your Tronsmart and power your Tronsmart on.

                    18. Wait about 20 seconds and Libreelec files will start copy to your internal memory of your Tronsmart.
                    -this process takes about 1 minute to complete.

                    19. Once install to internal memory is complete, you will have to install all add-ons as your cache and userdata will be wiped.
                    Last edited by e123enitan; 09 February 2017, 17:36.

                    Comment



                      Hi I have been using libreELEC 009 build for some time on a MXQ Pro 4K box and have been given another of these boxes with exactly the same PCB board. I made another SD card and got the box to boot to LibreELEC but no sound. On investigating I found Audio Device is set to Bluetooth Pulse Sound in Settings Audio output and I can not change it as it is greyed out even in Expert mode. How do I change this setting Please. All help appreciated. Altstart




                      Comment


                        Originally posted by e123enitan View Post
                        Just a realignment of the instructions to flash into Internal memory from this post ``Originally posted by hscotty55 View Post``


                        To do a clean install using SD card/USB drive*and then transfer Libreelec*internal memory:

                        1. Download file with*img.gz*extension from -> https://yadi.sk/d/srrtn6kpnsKz2/Libreelec .
                        Select the version of Libreelec you want to install.

                        2. Download the LibreELEC USB-SD Creator -> https://wiki.libreelec.tv/index.php?...USB-SD_Creator

                        3.*Get a SD card or USB*stick and format it*FAT 32.

                        4. Insert SD card or USB stick into your computer.

                        5. Open LibreELEC USB-SD Creator you downloaded from step 2.

                        6. In the *LibreELEC USB-SD Creator skip the YELLOW number 1 step. Go to the*PINK number 2 step.

                        7. Click SELECT FILE and navigate to where you downloaded you Libreelec.img.gz file from step 1.

                        8. In the LibreELEC USB-SD Creator on the BLUE number 3 step select your SD card or USB stick drive.

                        9. In the LibreELEC USB-SD Creator on the GREEN number 4 step click Write.

                        10. Once the image finishes writing to the USB stick or SD card click the* CLOSE button to exit the LibreELEC USB-SD Creator.
                        -If you see an immediate "Write error" please check the write-protect tab on the SD card this puts the card into read-only mode and writing will fail.

                        11. Eject your SD card or USB stick from your computer and insert it into your Tronsmart. Use the toothpick method to boot your Tronsmart.
                        -If it just keeps cycling back to the Tronsmart logo and will not boot into Libreelec, unplug your Tronsmart and plug it back in WITHOUT
                        -using the toothpick method and it should boot into Libreelec.

                        12. Verify Libreelec runs correctly from the SD card or USB stick and shut down your Tronsmart.

                        13. Take the SD card or USB stick out of your Tronsmart and insert it back into your computer.

                        14. Navigate to your SD card or USB stick drive on your computer.

                        15. Look for the file called "install.sh" and rename it to "install.aml"

                        16. Eject your SD card or USB stick from your computer.

                        17. Insert your SD card or USB stick back into your Tronsmart and power your Tronsmart on.

                        18. Wait about 20 seconds and Libreelec files will start copy to your internal memory of your Tronsmart.
                        -this process takes about 1 minute to complete.

                        19. Once install to internal memory is complete, you will have to install all add-ons as your cache and userdata will be wiped.
                        Thanks so much for this fantastic guide. Successfully upgraded from OpenELEC 16.1 to Libre 17. (Vega Telos)

                        Just one question..Looked back a few pages and I can't see the answer - No Tronsmart remote support ? (LibreELEC Krypton)

                        Comment


                          Originally posted by Altstart View Post
                          Hi I have been using libreELEC 009 build for some time on a MXQ Pro 4K box and have been given another of these boxes with exactly the same PCB board. I made another SD card and got the box to boot to LibreELEC but no sound. On investigating I found Audio Device is set to Bluetooth Pulse Sound in Settings Audio output and I can not change it as it is greyed out even in Expert mode. How do I change this setting Please. All help appreciated. Altstart
                          Perhaps in these TV consoles a different version of firmware or need to pick the correct dtb file.

                          Comment


                            Hi balbes, Please HELP I can't get by box to work, I think I have installed incorrect tree or file into the internal hard drive of S905 Tronsmart META, everything was working fine prior to the installed, on the box it display blue light but nothing is displayed into my TV.
                            I have exhausted the USB approach posted in Tronsmart forum, yet this approach did not work, the box appear to be active, but something is preventing it from being display on TV, this driving

                            Thanks

                            Comment


                              If you believe the box is booted and running but not lighting the display. Using a wired USB keyboard, try holding Ctrl+Alt and while keeping them depressed, press and release F5 and then press and release F6 and then press and release F7.

                              Comment


                                Originally posted by RISCy Dude View Post
                                If you believe the box is booted and running but not lighting the display. Using a wired USB keyboard, try holding Ctrl+Alt and while keeping them depressed, press and release F5 and then press and release F6 and then press and release F7.
                                Nice I will give your suggestion a try and keep you posted.
                                Thanks

                                Comment

                                Working...
                                X