UPDATE - Marschmallow - Wasser Firmware for Beelink R89

[digitalriver]

second log:when I run the program "camera"

[BTR11]

not only you. I have problem with usb otg too. And disabling/enabling "connect to pc" in settings dont help

I think, you have another box. For example, your box with 16GB ROM, but my box with 8GB rom.

However there are two versions of the Beelink R-89 (16Gb) and Ubox (16Gb and 8Gb) the differences between 16Gb and 8 Gb apart of the rom size is limited only to the WiFi module, and between board revision older than pcb 3.0, which are the two colors led blue/red changing from sleep to "on" then "off"; the other components are the same including mini USB OTG and full USB ports. I think bluesmanuk point out the menu config for USB be set properly, that´s the key on this MM; it´s a new complication of this android upgrade.

[BTR11]

Also camera not work on 4.0.8 ....in different usb socket....otg, not otg, no difference.

Same here, this is a bug, USB camera does not work; I have not tested before, now I can try Logitech C170 and C525 which are some of the few models that work in Android and here in MM v4.0.8 does not work; you can see the light turning on for a second but not more; then the system can be frozen or hang and it neeed it to be disconnect the camera and reboot. May be the USB camera driver had not been included in the fw/rom.

One good thing that I had not tested before as well is that I had confirmed now that the R-89 built-in microphone works Ok.

[wasser]

Also camera not work on 4.0.8 ....in different usb socket....otg, not otg, no difference. After connecting and restarting not work: all videoplayers, window "sound" in "settings"(why only sound setting????), spontaneous reboots and lethargy. After disconneting and rebooting - all work. Sooo... not work camera, not work keyboard....obviously problems with USB drivers
P.S Enabling/disabling "connect to pc". "charging/mtp/ptp/usb ethernet etc" not help absolutely

i can reproduce this issue which seems only appears when usb webcam is connected to USB port.
It will be fixed in next release.

[wasser]

Hi all, marschmallow wasser firmware version 4.0.9 is released. For more infos, please take a look at the first post.
Enjoy and please don't forget to post feedbacks!

thanks
Wasser

[bluesmanuk]

4.0.9 Feedback

Everything as before and discussed, so will focus on new features/fixes that I am able to test.

Adjust refresh rate working better if HDMI mode set at 50Hz as default (this may work better at 60Hz for other regions where this is the default) rather than with 60Hz as default.
Best demonstrated when playing burosch1.mpg, where it is much smoother when default is set to 50Hz.

Colour mode options all present and correct and selectable (using Auto at present)

USB flash drives detected and usable as discussed earlier today.

[claudecir]

In Dolphin browser - > Config - > advanced - > Agent - > desktop (second) if you set this agent and play videos on YouTube (vp9 in this case) in 1080p, audio sync problem appear.

Enviado de meu LG-D802 usando Tapatalk

[bluesmanuk]

In Dolphin browser - > Config - > advanced - > Agent - > desktop (second) if you set this agent and play videos on YouTube (vp9 in this case) in 1080p, audio sync problem appear.

Enviado de meu LG-D802 usando Tapatalk

Do you have a specific example that can be tested.

Tried a few videos using the same settings and audio/video sync was fine but not 100% sure whether they are all being played in VP9 format.

[claudecir]

This and others. 4.0.9 only in vp9 1080p and 1080p 60fps. 720p ok.

Dolphin/Opera... All in Desktop mode.

[claudecir]

In this video i recreate problem in Chrome it Desktop mode and 1080p 60fps.

To see the codec click long and select video statistics.

[BTR11]

Hi wasser, thanks for the new release v4.0.9.

I´m currently testing it, but I had noted a regression regarding to the stability of 5Ghz WiFi; I set the right region and connect; but after a couple of minutes the connection is lost; I have to reconnect, but this is ocurring frequently to me; i HAD swicthed now to ethernet to can work, but with the Wifi problem I think I won't stay with this version.
I had tested the USB camera, with some problems had started to work and produce image, but I cannoyt continue becuase the system get frozen. I have to disconnect it and reboot the device to can continue working; so, however the camera start to work, it cannot be used because the system crashed, currently still is not functional.

I will test the other aspects...

[bluesmanuk]

In this video i recreate problem in Chrome it Desktop mode and 1080p 60fps.

To see the codec click long and select video statistics.

I can see the issue in Dolphin but when I create the same scenario in Chrome, I can see no issues.

[scooter2014]

Maybe used chrome beta or dev ?

[bluesmanuk]

Playing through the Youtube app is the smoothest experience, so I would just recommend using that.

[claudecir]

I can see the issue in Dolphin but when I create the same scenario in Chrome, I can see no issues.

In my case the problem is very common.

The youtube app not Play movies in vp9 only h264/AVC...

Vp9 have low band consumption and is very important to low use band.

Thanks.

Enviado de meu LG-D802 usando Tapatalk