K-R42 Hybrid Firmware (HFW) 1.1.0 by lewy20041

[Gormar]

And I want to Let You all know that Wasser Kernal and Lewys 2.0.4 has Been Running for 2 days Now with out any random Reboots ... Which happen 2-3 times every 8 hours on the K-r42 ...

Most Likely that Problem With the Ethernet Errors is causing the Reboots ... as there are NO errors reported with The T-R42 Kernel Wasser Put Together

I wouldn't be so sure about that. For me LAN isn't any problem (WiFi connection disabled) and random reboot happens for me only when I interact with the device. For example today when I left it with task of downloading "some" files there wasn't any problems.


$ busybox ifconfig eth0
eth0 Link encap:Ethernet HWaddr 02:8B:0E:03:52:61
inet addr:10.200.200.102 Bcast:10.200.200.255 Mask:255.255.255.0
inet6 addr: fe80::28b:eff:fe03:5260/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:4983677 errors:14 dropped:14 overruns:7 frame:7
TX packets:2355937 errors:2 dropped:0 overruns:2 carrier:0
collisions:0 txqueuelen:1000
RX bytes:3089289933 (2.8 GiB) TX bytes:161234753 (153.7 MiB)
Interrupt:51 Base address:0x8000


$ uptime
up time: 09:16:46, idle time: 1 days, 06:48:38, sleep time: 00:00:00
$ uname -ra
Linux localhost 3.0.36 #50 SMP PREEMPT Thu Sep 19 02:18:21 CEST 2013 armv7l GNU/Linux


I've got another theory but I would like it to confirm first. For that I'm waiting when wasser would have more free time and compile kernel without LZO compression . That's why I'm so angry when someone disrupt his time aimlessly in my view .

[michael2t]

Gormar,

Hey Gormar,

I have two units that are Running doing Nothing (24/7) and I have the Boot Animation Sound
loaded and 2-3 times a day with no one using it ... it re-boots ...
And because Lewy has no way to turn down the volume I about Fall off my chair.

And I am running at 1.6 freq speed no over clocking ... 2.0.4

So I am Sorry to disagree ...
But Any fixes/Idea you can do are always a good thing ...

The T-R42 with Wasser's kernel has NOT reboot by itself ... It has Been running
no stop after I got the new working kernel installed... from Wasser with lewy's 2.0.4 Firmware and
Wasser's Kernel Update ...

And I only have a mapped share to My NAS on Both K-R42 and T-R42 ...

As You can See Wasser And I and Many of use Have the same issue:
Way to Many Errors: I have tested the same cables and power supplies for Both Units:
The Errors Only Occur on the K-R42 ....Wired Ethernet which is all I use on both units.

eth0     Link encap:Ethernet  HWaddr F6:A1:58:6F:D7:BB
          inet addr:192.168.0.119  Bcast:192.168.0.255  Mask:255.255.255.0
          inet6 addr: fe80::f4a1:58ff:fe6f:d7bb/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:208521 errors:4294641141 dropped:4294641016 overruns:1275 frame:4294639866
          TX packets:161865 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:101617030 (96.9 MiB)  TX bytes:33539121 (31.9 MiB)
          Interrupt:51 Base address:0x8000

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

So I guess we will have to agree to disagree ...(((SMILES)))

Michael T.

[wasser]

Hi wasser,

Stock IR Remote mouse not working with 1080p Kernel. Could you please take a look?

Thanks.

have you downloaed and flashed my t-r42 firmware?
i uploaded new kernel-1080p for t-r42, it fixes the issue with stock ir remote

http://d-h.st/iMq

[michael2t]

Wasser thanks for the update

Hello Wasser,

Thanks For the Update did You include the CWM recovery ??

Thanks again ... I have another T-R42 on order now ...

Michael T.

have you downloaed and flashed my t-r42 firmware?
i uploaded new kernel-1080p for t-r42, it fixes the issue with stock ir remote

http://d-h.st/iMq

[lewy20041]

i will look into reboot isue and will try to reslove it with next update.
i wasnt aware of this as i moust of the time dont have firmware more than 1 day on my box;p

[lewy20041]

have you downloaed and flashed my t-r42 firmware?
i uploaded new kernel-1080p for t-r42, it fixes the issue with stock ir remote

http://d-h.st/iMq

so many kernels.
i need to catch up
great work wasser.

[wasser]

Hello Wasser,

Also in the Kernel could You add the CWM recovery with remote support

For Both 1080p and 720p

Thanks

Michael T.

please download my new t-r42 firmware which i uploaded yesterday. It includes my new CWM recovery with remote support, it should work for t-r42 and k-r42

[michael2t]

Thanks Lewy

Hey Lewy...

Is there any way I can Put command in startup script to lower Volume of Boot Animation Sound ...

I like the sound Just NOT full volume ...

And NO the System Volume controls do NOT effect the Boot animation Sound Level ...
I have tried all of the volume option combos with no sucess ...

Thanks again for all the Hard work ....

Michael T.

i will look into reboot isue and will try to reslove it with next update.
i wasnt aware of this as i moust of the time dont have firmware more than 1 day on my box;p

[michael2t]

Hello Wasser

Hello Wasser...

Thanks I will Go Test them with the NEW CWM Options...

Keep up the Good Work ...

Michael T.

please download my new t-r42 firmware which i uploaded yesterday. It includes my new CWM recovery with remote support, it should work for t-r42 and k-r42

[xatang2013]

have you downloaed and flashed my t-r42 firmware?
i uploaded new kernel-1080p for t-r42, it fixes the issue with stock ir remote

http://d-h.st/iMq

I already downloaded the new firmware and flashed. So far so good. Just one issue with the stock ir remote.

With the new kernel-1080p for t-r42 you just uploaded to fix stock ir remote then I'm all set.

Thanks for your hard work.

[michael2t]

Hello Wasser...

Hello Wasser...

The CWM works with USB Mouse/Keyboard remote But NOT with The IR remote that comes with the player
The Up/Down Do not work ...

Thanks ... I have usb keyboard/mouse which works now thanks ...
Yeah ... I can use CWM ...now ...(((SMILES)))

Michael T.

please download my new t-r42 firmware which i uploaded yesterday. It includes my new CWM recovery with remote support, it should work for t-r42 and k-r42

[xatang2013]

have you downloaed and flashed my t-r42 firmware?
i uploaded new kernel-1080p for t-r42, it fixes the issue with stock ir remote

http://d-h.st/iMq

Stock ir remote worked with new kernel-1080p.

Thanks.

[wasser]

Hello Wasser...

The CWM works with USB Mouse/Keyboard remote But NOT with The IR remote that comes with the player
The Up/Down Do not work ...

Thanks ... I have usb keyboard/mouse which works now thanks ...
Yeah ... I can use CWM ...now ...(((SMILES)))

Michael T.

i will fix it in next update

[michael2t]

We are Talking about CWM Not normal Player Functions

Hello xatang2013,

We are Talking about CWM not Normal Player Functions

Michael T.

Stock ir remote worked with new kernel-1080p.

Thanks.

[michael2t]

Hey Wasser...

Hey Wasser...

Thanks ...

Please let me Know if there is any Testing I can Do ... Or Any thing I can Do To Help With The
Ethernet Issues ... or any issues you might Need tested ...

Thanks again ...

Michael T.

i will fix it in next update