[ROM] Mecool M8S Pro TVStock Nexus ROM (Android TV 7.1)

[supermal]

I'll try again with SD, redoing from the beginning. But SD Card Method does not require charger.

you will need to use power plug if using sd card method!!!

[supermal]

I can only get "Connection Success" when plugging the power supply.

thats not the power supply its the usb to usb cable!also what burning tool version are you using?i cant make it out.https://www.youtube.com/watch?v=h4Za0_B879Y maybe this video will help?

[Novato]

When I use the SD Card Burn method, just leave the box connected to normal TV, insert the card and press the reset button. At this point, instead of starting in recovery mode, it starts in bootloader mode and installs the firmware. It is similar but different than the OTA update.

[lyubodelev]

When I use the SD Card Burn method, just leave the box connected to normal TV, insert the card and press the reset button. At this point, instead of starting in recovery mode, it starts in bootloader mode and installs the firmware. It is similar but different than the OTA update.

But you plug in the power connector, don't you?

[supermal]

kenable USB 2.0 A to A (Male to Male) High-Speed BLACK Cable 0.5m 50cm .this is the cable i use.

[lyubodelev]

kenable USB 2.0 A to A (Male to Male) High-Speed BLACK Cable 0.5m 50cm .this is the cable i use.

And mine is self made!

[supermal]

But you plug in the power connector, don't you?

he must be using usb to usb cord to power box from tv.might not output enough power?normally just used for usb tv sticks.

[lyubodelev]

he must be using usb to usb cord to power box from tv.might not output enough power?

Sure it is not enough! The TV gives max 0,5-0,7 A!

[Novato]

But you plug in the power connector, don't you?

Yes

[supermal]

Yes

now i am confused.

[lyubodelev]

Yes

Do it with the new charger!

[Novato]

kenable USB 2.0 A to A (Male to Male) High-Speed BLACK Cable 0.5m 50cm .this is the cable i use.

I'm sorry I did not understand at first, it will probably be very difficult for me to find it here in Brazil. I'll take a look at Aliex ...

[Novato]

Do it with the new charger!

I do not have, all I have is the source of the device, a generic USB male - male cable. I live far from the street, but I'll try it later. Thank you, always.

[lyubodelev]

I'm sorry I did not understand at first, it will probably be very difficult for me to find it here in Brazil. I'll take a look at Aliex ...

Don't you have any friend with a box to try with his charger And what about this charger, that you show a picture of it? And at the end it may reveal that your old charger is working fine, so don't through it!

[Novato]

Don't you have any friend with a box to try with his charger And what about this charger, that you show a picture of it? And at the end it may reveal that your old charger is working fine, so don't through it!

If charger you talk about power supply, I have 2 of two Box. Both work well. What I will not have is a USB cable Male / Male short and with good quality of traffic.