[ROM] Beelink GT-King ALVATECH Standard Android (9.0 Pie) S922X

[davidthecloner]

HI ALVATECH ,

Thanks for your amazing firmware and all your work.

I have a little problem. I set the time for the screensaver and everytime i reboot the gtking the value is missing so the screensaver activates. Is there any posibility to remove the screensaver.
I prefer to remove the screensaver because it appars very often and it bothers me.
Thanks again
David

[treseguet]

I think that the rom version you mentions is for gt king PRO not gt king.

Hi Alvatech,
i asked to Beelink and they confirmed that the firmware 9090 is for gt king
best regards.

[manolo.montero.2010]

Hi dear Alvatech, thanks for your effor to do this, I have found two issues:

1.- Concern with the bluetooth devices, I paired my PS4 Joystick with my GTKing B922HXXXXXXXX, all ok, but when I tried to test the keys with any app, it doesn't works, for example with Octopus app, but when I try to do the same with my samsung note 8, this works perfectly, I think this is a problem with the drivers compatibility.

2.- Another issue is with the graphics drivers, when I enter to TVSettings/DroidSettings//Display/Screen Resolution, the "Auto Switch to best resolution" option is disabled, I can´t switch on, the same happens with "color Space Settings" option, it´s disabled too, so, when I change the "Display Mode" option (default is 1080p60hz) to any other option (4k for example) when I switch on SDR to HDR for a few moments this works, but my TV show me a message inmmediately after showing: "To bring you optimized image quality, ULTRA HD Deep Color will activate for the current HDMI port", when I push "ok" (I don´t have any other alternative) , my TV lose the signal, I have to enter to my TV Settings, enter to "HDMI ULTRA HD Deep Colour", and unselect HDMI port Ultra HD Deep option for I can recover my GTKing images again, when I return to Screen Resolution settings again in my GTKing, it is in 1080p60hz again (the default resolution), But I know that the GTKing is compatible with 4K resolution and HDR, because until I don´t push ok in the TV message, the colour is HDR, I hope that you understand what I try to explain.

I will be waiting for your comments, thanks for your time.

[sesdave]

Hi Alvatech,
i asked to Beelink and they confirmed that the firmware 9090 is for gt king
best regards.

Ask them to confirm model serial types and for a link . Last 909PO was for GTKing Pro only.

[treseguet]

HI Alvatech,
look at this link http://www.bee-link.com/forum.php?mo...age%3D1&page=3.
Regards.

[sesdave]

Thanks for the link. Was unaware that Beelink had released an 909P0 update for the standard GT King models.

[sesdave]

Thanks for the link. Was unaware that Beelink had released an 909P0 update for the standard GT King models.

[hsnk1977]

HI ALVATECH ,
* Fixed a permission grant issue

how you fix this issue?
i try beelinks 909P0 firmware and i can't give 'Notification Access' permission to an app?

can you help me?

[JandeHekkerman]

I have received my Beelink GT King this week. I'm currently using the default Beelink ROM (buildnumber 909PO_wol), but I'm having serious issues with the OpenVPN for Android app. When using ethernet, the VPN connection is unstable. It immediately disconnects and reconnects. This does not happen when using a wifi connection instead of wired ethernet. A similar issue has been reported earlier on the Beelink forum, but I did not find a solution.

http://www.bee-link.com/forum.php?mod=viewthread&tid=53556

I'm considering to install the Alvatech rom. Does someone use the Alvatech GT_King_AT_V5.0_C92X ROM and the OpenVPN app for Android? If so, can you confirm there are no issue when using ethernet/wired connection?

Regards


EDIT: fixed by downgrading the OpenVPN for Android app.

[raruba]

I have received my Beelink GT King this week. I'm currently using the default Beelink ROM (buildnumber 909PO_wol), but I'm having serious issues with the OpenVPN for Android app. When using ethernet, the VPN connection is unstable. It immediately disconnects and reconnects. This does not happen when using a wifi connection instead of wired ethernet. A similar issue has been reported earlier on the Beelink forum, but I did not find a solution.

http://www.bee-link.com/forum.php?mod=viewthread&tid=53556

I'm considering to install the Alvatech rom. Does someone use the Alvatech GT_King_AT_V5.0_C92X ROM and the OpenVPN app for Android? If so, can you confirm there are no issue when using ethernet/wired connection?

Regards

YES the Alvatech 5.0 rom is awesome but not sure about the openVPN, don't use it

[JandeHekkerman]

YES the Alvatech 5.0 rom is awesome but not sure about the openVPN, don't use it

Thanks for your info. I'll have to wait for somebody who can confirm the OpenVPN app for Android (link included) is working correctly.

https://play.google.com/store/apps/details?id=de.blinkt.openvpn

Verstuurd vanaf mijn SM-N950F met Tapatalk

[lovacuzitu]

I have Beelink GT King with SA9X S/N. I tried to flash your ROM for this S/N but it stucked at 7% with error message:
(0*32030201) Uboot/Get result/DiskInitial error

I tried other official ROMs for this S/N and the result is the same. Is there any advice what should I try?

I forget to mention, I need to flash new ROM because when I plug in TV box there is only red skull no signal on TV. Green skull never turns on (only during flash process until 7%). Thank you in advance.

[raruba]

I have Beelink GT King with SA9X S/N. I tried to flash your ROM for this S/N but it stucked at 7% with error message:
(0*32030201) Uboot/Get result/DiskInitial error

I tried other official ROMs for this S/N and the result is the same. Is there any advice what should I try?

I forget to mention, I need to flash new ROM because when I plug in TV box there is only red skull no signal on TV. Green skull never turns on (only during flash process until 7%). Thank you in advance.

When you plug in the USB, make sure you plug in the power supply also.

[lovacuzitu]

When you plug in the USB, make sure you plug in the power supply also.

I plugged them in simultaneously (USB cable and power charger). Before that I loaded img file and pressed Start. Burning tool started formatting but at 7% I got earlier quoted error message.

[raruba]

I plugged them in simultaneously (USB cable and power charger). Before that I loaded img file and pressed Start. Burning tool started formatting but at 7% I got earlier quoted error message.

Are you using 2.1.7.3 USB Burning tool? Plug USB in and wait for green skulls then plug in just as soon as skulls turn green.