Pipo M9 Pro RileyROM 2.0

[Kastrup]

Thanks ... I figured it out as soon as the '*.bat' popped in front of my eyes (reminded me of the good old DOS OS ...
/Kastrup

I made an error , it should be the orginal extension of gps.conf or gps.cfg and not *.bat (too many adb scripts) sorry about that.

[ludoke]

After changing the locale settings to your country/continent via the Win (use note pad, after saving the modified settings please check that Win Notepad dont save it as *.txt, if it does then all you have to do is zippped the *.txt (7zip) and within the zip app change the extension from *.txt to===> *.conf, then go out of the zip app and unzipped the file- I strongly recommend to use 7zip)

Now for your answer the gps.conf files should go into the system/etc folder just copy it over into system/etc folder, set to rw-r-r(permission) and ownership to to root.root,
For your information most Chinese device phone/pads do not have the gps.conf file in them since they are shipped all over the world and they conveniently left it out. Unlike SAMSUNG which knows where it ships its batches to therefore they have a similar conf file in them. If you look at the attached files SuplRoot.cert is from Googles and the other gps.cer is from SAMSUNG.
Happy trying it out you'll be amaze anything please PM me or " [email protected] ". But the performance is limited by the hardware that we get from PiPo especially the aluminium backing is causing a lot of interference ("attenuation" I quote a gps engineer). But this will improve the performance of a fix to below 20 seconds everytime (but on the first run it might take a few minutes but less than 5 min.
If you find other gps.conf files mod with A-GPS settings in them please avoid them for now since will degrade the wifi signals (I dunno why but i did try and my wifi refuse to connect to internet) and the gps takes forever to get a fix.

GPS ok now here ,i'm on Kasty Rom :build 20131010 ,just installed NTPSync and set time.
Gps test running for a while and 12 sats in view and 8 in use,this is indoors under a Velux roof window.
I'm curious what happened when i try it after hours when not in use.
Now getting fix whitin 10 secs on: Copilot ,Tomtom, Sygic and Navigon.

Can you tell me how i can post a screenshot taken with the PiPo ?

[cracktech]

SCreenshot button

GPS ok now here ,i'm on Kasty Rom :build 20131010 ,just installed NTPSync and set time.
Gps test running for a while and 12 sats in view and 8 in use,this is indoors under a Velux roof window.
I'm curious what happened when i try it after hours when not in use.
Now getting fix whitin 10 secs on: Copilot ,Tomtom, Sygic and Navigon.

Can you tell me how i can post a screenshot taken with the PiPo ?

Take the shot then go into the internal sdcard find for Screenshot folder of or if you have configured it to save into the DCIM folder find it inside there.
Or the best and easiest is to run gallery and it will seek for the shot just taken and you can post or attached to your e-mails. testing it for a prolong period of time will only drain battery but not much once you get out of any Maps apps it will switch off by itself (within android)
Why are you on KASTY's 10-10 version the 30-10 #353 version has the wifi issues sorted out(Skype sorted out), I used to dread switching off my device and when on the next boot up (the wifi is on) but the wifi did not connect to internet(grey icon). Now it is everytime it will show me a blue icon (internet is on).

[Atsop]

Parameter

First thanks to all for the great work
I want to flash first time my Pipo M9pro ,but I cant find the Parameter for 4GB.
Is the parameter included in the RileyRom 2.0?
I found only 3 files (parameter,parameter8,parameter12)

[daviepl]

First thanks to all for the great work
I want to flash first time my Pipo M9pro ,but I cant find the Parameter for 4GB.
Is the parameter included in the RileyRom 2.0?
I found only 3 files (parameter,parameter8,parameter12)

parameter is set to 4Gb as standard

[Atsop]

Thank you

[ludoke]

[QUOTE=cracktech;113349]Take the shot then go into the internal sdcard find for Screenshot folder of or if you have configured it to save into the DCIM folder find it inside there.
Or the best and easiest is to run gallery and it will seek for the shot just taken and you can post or attached to your e-mails. testing it for a prolong period of time will only drain battery but not much once you get out of any Maps apps it will switch off by itself (within android)
Why are you on KASTY's 10-10 version the 30-10 #353 version has the wifi issues sorted out(Skype sorted out), I used to dread switching off my device and when on the next boot up (the wifi is on) but the wifi did not connect to internet(grey icon). Now it is everytime it will show me a blue icon (internet is on).[/QUOTE

Thanks,but how do i get the screenshot into the QUOTE box?

[cracktech]

[QUOTE=ludoke;113598]

Take the shot then go into the internal sdcard find for Screenshot folder of or if you have configured it to save into the DCIM folder find it inside there.
Or the best and easiest is to run gallery and it will seek for the shot just taken and you can post or attached to your e-mails. testing it for a prolong period of time will only drain battery but not much once you get out of any Maps apps it will switch off by itself (within android)
Why are you on KASTY's 10-10 version the 30-10 #353 version has the wifi issues sorted out(Skype sorted out), I used to dread switching off my device and when on the next boot up (the wifi is on) but the wifi did not connect to internet(grey icon). Now it is everytime it will show me a blue icon (internet is on).[/QUOTE

Thanks,but how do i get the screenshot into the QUOTE box?

When you reply or start a new thread go to the bottom of the screen to see the "manage attachment" and attached your *.jpg image from PC to your mail (it is self explanatory)

[ludoke]

[QUOTE=ludoke;113598]

Take the shot then go into the internal sdcard find for Screenshot folder of or if you have configured it to save into the DCIM folder find it inside there.
Or the best and easiest is to run gallery and it will seek for the shot just taken and you can post or attached to your e-mails. testing it for a prolong period of time will only drain battery but not much once you get out of any Maps apps it will switch off by itself (within android)
Why are you on KASTY's 10-10 version the 30-10 #353 version has the wifi issues sorted out(Skype sorted out), I used to dread switching off my device and when on the next boot up (the wifi is on) but the wifi did not connect to internet(grey icon). Now it is everytime it will show me a blue icon (internet is on).[/QUOTE

Thanks,but how do i get the screenshot into the QUOTE box?

Ok i try,screenshot of gps test:


Ok succes,thank you four the tip,you only have to know it,it's easy as drink a pint.

[ludoke]

pipo m9 pro 3g

Does anyone has a link to a custom rom with build in CWM ,i mean cwm installed while flashing the rom ?
Also tutorial please.
For Pipo M9 Pro 3G

[rodentkj]

Does anyone has a link to a custom rom with build in CWM ,i mean cwm installed while flashing the rom ?
Also tutorial please.
For Pipo M9 Pro 3G

You can use CWM with this ROM. You just need to re-flash the recovery.
CWM is explained in the "First Time User Guide.pdf" included with the ROM download.


"Q: CWM (ClockWorkMod) and stock Recovery - whats what, and what is it for?
A: Stock (original) recovery has very few options and functions. CWM (CockWorkMod) Recovery is a 3rd party custom recovery mode, with highly extended possibilities and functions. If it is available for your device, it will be included and flashed at default. There will be an additional file named StockRecovery.img in the ROM folder - this is the Stock (original) recovery. If you don't want to use CWM, or are having problems with CWM Recovery, you can rename the recovery.img to CWMrecovery.img and rename stockrecovery.img to recovery.img - then restart the RKAndroidTool. On the first boot after flashing, recovery mounts and formats all of the drives necessary for the device to run properly. Some CWM Recovery installations don't do this properly, so stock recovery is recommended if you experience any problems with boot."

[Guest]

Does anyone has a link to a custom rom with build in CWM ,i mean cwm installed while flashing the rom ?
Also tutorial please.
For Pipo M9 Pro 3G

Or use this easy method (no PC needed): http://www.arctablet.com/blog/forum/...k3188-devices/

cheers

Tilo

[Raghu]

Hi, I am Raghu from Bangalore India.

I just received pipo 9 pro without Sim slot. I am no good in rooting etc and haven't done anything like this till now. My pipo tab is recognizing my 16 gb micro sd card. But thru host and usb slots, I am unable to connect my other things like 500 GB hard disc etc.

Some one suggested to upgrade my firmware!!

I need to know where do i find which firmware is currently on my tab and what should i do to get the both host and usb slot to start working. I have received OTG cable and mini/micro to usb wire also.

Pl help me with detailed procedure so that I can follow this!

I have a dell laptop and desktop computer at home.

Thanks to all in advance.

Rgds Raghu

Happy Halloween!!!! Our trick or treat gift from Pipo is a brand new firmware for the Pipo M9 Pro tablet...actually dated 10/30/2013. I've based v2.0 on this new firmware.

After some extensive tests with v1.9, this time, I took out as much bloatware as possible...only leaving in what was absolutely necessary.

This ROM is:

Rooted
Debloated
Multi-User added
VPN support added
Bluetooth GPS support added
Init.d Support
Busybox Support
English Default
CWM Recovery optional
4, 8 or 12gb user app space optional (default is 4gb)

As of now, there are no extra kernels for this ROM, like the others I've released in the last day or so.

Boot Art by Tattman65
Reboot app by Petrus
First Time User's Guide by Pr0xZen
Flash Tool by Finless

Download

Enjoy!!!!!!

If this ROM makes a difference for you, please consider a donation to support future RileyROM's here at Freaktab.com Donate!!!

[Nordo]

I just received pipo 9 pro without Sim slot. I am no good in rooting etc and haven't done anything like this till now. My pipo tab is recognizing my 16 gb micro sd card. But thru host and usb slots, I am unable to connect my other things like 500 GB hard disc etc.

Some one suggested to upgrade my firmware!!

I need to know where do i find which firmware is currently on my tab and what should i do to get the both host and usb slot to start working. I have received OTG cable and mini/micro to usb wire also.

Pl help me with detailed procedure so that I can follow this!

I have a dell laptop and desktop computer at home.

Thanks to all in advance.

Rgds Raghu

Hi Raghu.
I cannot answer the technical side of your questions. However, I can tell you that you MUST use the cables that came with your tablet.
Pipo tablets require cables where the metal part of the plug is about 2mm longer than normal plugs on similar cables. If you use any other cable, the plug will not make proper contact with the circuit board inside the tablet and your hards drive and/or your computer will not talk to your tablet.

A poster in this Pipo thread modified a standard cable by cutting away about 2mm of plastic from around the plug that goes into the tablet.

Hope this helps.

[cracktech]

hello , dont root an already rroted rom!

I just received pipo 9 pro without Sim slot. I am no good in rooting etc and haven't done anything like this till now. My pipo tab is recognizing my 16 gb micro sd card. But thru host and usb slots, I am unable to connect my other things like 500 GB hard disc etc.

Some one suggested to upgrade my firmware!!

I need to know where do i find which firmware is currently on my tab and what should i do to get the both host and usb slot to start working. I have received OTG cable and mini/micro to usb wire also.

Pl help me with detailed procedure so that I can follow this!

I have a dell laptop and desktop computer at home.

Thanks to all in advance.

Rgds Raghu

Yeeenaa day Raghu,

All these ROMS (customs) are already rooted , so dont be smart to ROOT again an already rooted ROM.
Thats the point of using these customs ROm (read the fine print, it said it is already rooted) so all you have to do is to reflash your device with this ROM