[ROM] Tanix X4 SC ATV v6.0 USERDEBUG - S905x4 - Android 11 - Multi-Wifi&BT

[freddy]

I have tryed this fimware on my A95X F4 but it wan't pass language selection. Any language I select it reset language section.

Testing on a95xf4 same as you
I have had that issue before
It was because no bluetooth remote to pair for initial setup

So used generic mouse with dongle

Also rc maps config for a95xf4 has been added to this Rom
So had to use d-pad to scroll then OK button to get past
language.

I have first revision a95xf4 that came with Android 10

I have ethernet only
No wifi bluetooth

Still is better than stock from 2021

Happy Testing

[superceleron]

Tried that, but it seems there is no kitchen that can deal with amlogic android 11 rom. Tried kern and mik, and always stuck in bootloop.

Try this one : https://github.com/xKern/AmlogicKitchen
But let me tell you, editing a android 11 rom is not as easy as it was in 7/8/9 and even 10.

[niemamkolan]

Hi. I install this on my X96 Max+ Ultra with S905X4 chip. I think everything works fine but my IR remote included with adnroid box nor workinkg properly. It is way too put remote.conf file in this rom myself?

Thank you in advance for help and sorry about my bad english

[superceleron]

Hi. I install this on my X96 Max+ Ultra with S905X4 chip. I think everything works fine but my IR remote included with adnroid box nor workinkg properly. It is way too put remote.conf file in this rom myself?

Thank you in advance for help and sorry about my bad english

at the moment no, unless you edit the rom itself but there might be a way if you use adb/shell to load a file.
I will then post here the command to load the file, you might need to put it in internal storage of the device.

[niemamkolan]

at the moment no, unless you edit the rom itself but there might be a way if you use adb/shell to load a file.
I will then post here the command to load the file, you might need to put it in internal storage of the device.

i tried to do it by ADB and only i see is the memory is in read only mode

[Johnoo]

Hi, flashed HK1RBOX-X4, turn out with no Wi-Fi and no Eth. Tried swapping the Vendor partition using `Multi Image Kitchen`, but did not boot.

If possible to add Wi-Fi and Ethernet support for HK1RBOX-X4.

Firmware link.

https://drive.google.com/drive/folders/1vRquulNUednPw-vgQCOg_Jo8h0f-lN0t

Cheers

[superceleron]

Hi, flashed HK1RBOX-X4, turn out with no Wi-Fi and no Eth. Tried swapping the Vendor partition using `Multi Image Kitchen`, but did not boot.

If possible to add Wi-Fi and Ethernet support for HK1RBOX-X4.

Firmware link.
https://drive.google.com/drive/folde...Og_Jo8h0f-lN0t

Cheers

hmm try replacing only the _aml_dtb.PARTITION the vendor_boot_a.PARTITION and the boot_a.PARTITION
But i think wifi still not going to work.... but the ethernet should work.

[Johnoo]

hmm try replacing only the _aml_dtb.PARTITION the vendor_boot_a.PARTITION and the boot_a.PARTITION
But i think wifi still not going to work.... but the ethernet should work.

tried various combination, not quite there yet.
thanks for the info.

[superceleron]

tried various combination, not quite there yet.
thanks for the info.

yes you might need some tweaking there, anyway welcome.

[ma7mod]

great job bro i will try on h95 max x4

[milkomm]

great job bro i will try on h95 max x4

I also have H96 Max X4, how does the firmware work pls

[ma7mod]

I also have H96 Max X4, how does the firmware work pls

It work good except wifi and screen led and power on light.
otherways im using ethernet.
it's ok speed and rooted rom
now im using x96 max plus ultra AOSP rom form slimbox

[freddy]

Yes of course

Maybe can you move last two post to

Thread by bergamesk

A95XF4 AMlogic 905X4

[gus8511q]

i flashed OTA and my tanix x4 stuck on androidtv logo. what to do?

[superceleron]

you need to flash the IMG.
Or try to boot to recovery and do a factory reset.