NEOMODE CUSTOM ROM MK809III AP6210 Version 1.9a *UPDATE*

[christiand]

hi,

yes i tried both modi 60hzand 50hz. but wireless is extremly good. hd streaming via icefilms is very nice. just watched true detective in really good quality.

what me also bothers is, that the fix mounted ir remote from ugoos is not working, but also my koenig usb wireless remote is too slow. meaning when i press a button always two clicks are recognises .... which makes it almost useless.

christian

1.920 x 1.080 with 24p is working though. without any flickering.
is it possbile to somohow minimize the status bar automatically?

[fatattack]

1.920 x 1.080 with 24p is working though. without any flickering.
is it possbile to somohow minimize the status bar automatically?

I have the same issue. How do you set it to 24p ?
use fullscreen+ app for xbmc, works great

[dannyg]

The DL link at the begining of the post does not work!!

Is there another place to DL the file?

[imaddiced2u]

The DL link at the begining of the post does not work!!

Is there another place to DL the file?

The download links just worked for me. DL speed is pretty slow though.

[scooter2014]

http://www.w2comp.com/detail.asp?cat...4&pdtid=700202


There a few versions of that one but since your already at stock we can jump ahead

Download neomode rom from here and unzip to a folder.

Find the driver folder and the driver for your version of windows.
There should be three files write click on each tell you see install and then do so.

Now go insto the rkdeveloptool folder and double click on rkandroidtool

The tool should open

Plug the usb cable into the computer

Now the tricky part.. use a paper clip or the like to press the small buttion down in the hole on the side.
As your doing this plug the mini usb into the mini usb on the side next to the sdcard slot.

The tool should suddenly show found rockhip device and you can let go.

Click eraseIDB and when that done click run.

Watch the progress and you know when its done and after that plug in normally.

Dont worry about bricking since even a bad flash is fixable.

ok is this same process for the rk902 I see so many files and write click? 3 files ? What files and do I click erase idb on this model as we'll.

[scooter2014]

Ok opened the neomode rom flash tool

all the boxes selected except update.img

i selected the file from your file for each example loader i clicked where 3 dots on side of program and selected the loader from your file and same for each of the items checked from 1-7 i selected the kernel 1766 If i did that right then do i erase idb first? Then Click run? Its the first time ive used your flash tool so just wanted to get the process right is all and the box i am flashing is the rk902 model.



Thanks in Advance Neomode.


Wezzy

[fatattack]

Ok opened the neomode rom flash tool

all the boxes selected except update.img

i selected the file from your file for each example loader i clicked where 3 dots on side of program and selected the loader from your file and same for each of the items checked from 1-7 i selected the kernel 1766 If i did that right then do i erase idb first? Then Click run? Its the first time ive used your flash tool so just wanted to get the process right is all and the box i am flashing is the rk902 model.



Thanks in Advance Neomode.


Wezzy

Best pratice is to erase db first yes.
after this just click run and all parts of the firmware will be flashed

[christiand]

I have the same issue. How do you set it to 24p ?
use fullscreen+ app for xbmc, works great

In Settings -> Screen there is an Option for HDMI. I've the full list for HD Ready and Full HD. Including 1.920 x 1.080 24p

Regards

[uggp]

MK809III Bluetooth

Hello,
I have 809III with 1.9. I have problems with bluetooth.
I want to connect via bluetooth: keyboard, mouse and audio receiver. On the stock firmware I was able to set everything. Unfortunately, at 1.9 I have problems. Devices connect and disconnect for a while. After rebooting again, are in trouble. I don't know where is problem. MK see devices. But for "pairing" need time. But connection is unstable. The distance between the devices is about 20cm.

Can anyone say, where are some configuration files for bluetooth? Perhaps mode, the transmit power (?). Anything, I want to experiment with this device.

Compilation 1.9 is very good, but with Buletooth there is something wrong.

[imaddiced2u]

Hello,
I have 809III with 1.9. I have problems with bluetooth.
I want to connect via bluetooth: keyboard, mouse and audio receiver. On the stock firmware I was able to set everything. Unfortunately, at 1.9 I have problems. Devices connect and disconnect for a while. After rebooting again, are in trouble. I don't know where is problem. MK see devices. But for "pairing" need time. But connection is unstable. The distance between the devices is about 20cm.

Can anyone say, where are some configuration files for bluetooth? Perhaps mode, the transmit power (?). Anything, I want to experiment with this device.

Compilation 1.9 is very good, but with Buletooth there is something wrong.

Bluetooth problems are a known issue for the 1.9a rom. I'm using Neomode's 1.7 rom and SAM 1080p 1.8ghz ram 1400mhz kernel on both of my MK809III's. Bluetooth and Wi-Fi work perfectly.

[uggp]

thanks imaddiced2u
so, i back to 1.7

[Move]

Hi, how i can rotate the screen?
Apps for rotating dont works.

[Kapitein_Henk]

Hi,

I just got my ugoos mk809iv yesterday so im kinda new to this. But im trying to get it to play 1080p video's but al the roms i have tried so far have a stutter in the playback.

And when i try to use the neomode 1.9a rom it goes in to a bootloop. So far i have tried the defaul kernel, kernel 2 and 3 but they al give me the same result(bootloop). So im hopen someone here can give me some advies.

[neomode]

AW: NEOMODE CUSTOM ROM MK809III AP6210 Version 1.9a *UPDATE*

Your Device is a UM2 with external Antenna.

Neomode

Gesendet von meinem GT-I9305 mit Tapatalk 2

[Kapitein_Henk]

Your Device is a UM2 with external Antenna.

Neomode

Gesendet von meinem GT-I9305 mit Tapatalk 2

thx for the reply here is a link of the one that i got: http://www.ibood.com/nl/nl/product_s...hernetadapter/